Hello Flash owners or System 4 specialists! I recently acquired a Flash and I am working on getting the issues fixed.

I have a couple questions and requests. Any assistance with any of these would be most appreciated!!!!

1. I downloaded the manual from ipdb however pages 49-54 can be difficult to read (blurry) the CPU assemply and driver assembly drawing with the list of components I need especially. Does anyone have a clearer scan of these pages?

2. The "Credit Knocker" solenoid coil in the cabinet is fried and appears to have locked on at some point. Can anyone confirm the solenoid part number as my coil sleeve is completely burned up.

3. It is difficult to read the schematics I downloaded (Blurry) can anyone list the components (Transister, Predrive, PIA) etc) that would need to be replaced to correct this credit Knocker (2J9/14) issue on the driver board (Q40/R68/R69/R70 area I believe).

Thanks for any help Super Pinsiders!

WOW AS ALWAYS thanks for the extremely fast and comprehensive info PINSIDERS!

viperrwk!!! Thanks for directing me to the Sys4 schematic. I did notice that the CPU for the uploaded Flash was only for the Sys 6 version.

I got my coil ordered!

New question. It appears that my CMOS RAM 5101 is bad. The current chip is labled SCM 5101E-3. Does anyone know the correct RAM replacement Chip for Flash and is it the same for Phoenix (Another System 4 game). Does it make sense to replace all of the RAM Chips and what are the correct ones for the other two?

Any Direction is appreciated!!!

Thanks for the advice everyone!