(Topic ID: 244732)

Williams Flash PB Coils 1-4 Staying energized. Please help

By StotzBotz

2 years ago



Topic Stats

  • 2 posts
  • 2 Pinsiders participating
  • Latest reply 2 years ago by Atari_Daze
  • No one calls this topic a favorite

You

Linked Games

#1 2 years ago

Hello folks. I have a Williams Flash machine that was purchased with a problem I'm trying to resolve. Coils 1 through 4 are staying energized the moment you turn on the power switch. When I got this machine the corresponding driver and pre driver transistors were all burned up so I replaced them. I also replaced IC 1 the 7408 chip and used a socket. All of the coils are new and all of the diodes are new. Trying to determine if there is a chip on the driver board that needs replacing or something else that I'm overlooking. I hate to order a $225.00 Driver board if there is anything else that I can try first. The 40 pin connector on the board is in great shape and might have been replaced. Any help would be greatly appreciated..

#2 2 years ago

Are the switches associated with those coils closed or open?

Hey there! Got a moment?

Great to see you're enjoying Pinside! Did you know Pinside is able to run thanks to donations from our visitors? Please donate to Pinside, support the site and get anext to your username to show for it! Donate to Pinside