Flash
Williams, 1979I'm working on a 1979 Williams Flash pinball. Despite buying a coil sleeve kit from one of the well known parts suppliers, it doesn't have the correct coil sleeves. I've check the manual and documentation on IPDB.org as well as searched this forum and the internet in general and can not find a reference for coil sleeve sizes. Can anyone point me to a reference or have information on the 14 coils and correct sleeve sizes for this game? Thank you.
Williams coil sleeves are as noted:
1) General coil sleeve, flippers, jet bumpers, kickers 1/2 x 1-3/4"
2) D/T coil sleeve are an odd size #03-7066-4 1/3 x 2-1/8" whole length.
3) Outhole kicker uses an aluminum coil sleeve same common size as #1.
--- might have been leftover from the EM era.
4) Coil ID #No. reflect doide-lug-sleeve-wire positions.
Quoted from Dayhuff:Buy the longer ones from PBR and cut them as needed.
John
Yeah, some of the ones from the "kit" I bought are too long. I'll probably just cut those down. Otherwise, the pop bumper linkages hit the new sleeve.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/williams-flash-coil-sleeve-sizes and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Battle Creek, MI