Fish Tales
Williams, 1992So as I work through this Fish Tales and am converting to LED I'm missing the upper half of the backbox GI. Looks like I need to rebuild J120 considering it wasn't plugged in correctly and one of the wires came off in my hand. What tool do I need to punch the wires into a new connector ?
IMG_20201107_223422 (resized).JPGYou can tell those have come apart multiple times.
Time to ditch the IDC plugs and go straight to crimp on plugs.
Will need new plug plus contacts and one key.
Can find these here:
https://www.greatplainselectronics.com/products.asp?cat=81
Also need a crimp tool. For low volume and a decent crimper, see Sargent 1026-CT.
https://www.greatplainselectronics.com/products.asp?cat=80
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/williams-fish-tales-connector-replacement and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Honey Brook, PA