Replacement translites and cabinet decals can all be found on ebay. Someone has started producing them and they can be found at reasonable prices. It seems that someone is piecing one out right now and you may be able to find other parts that don't come up too often.

Translite:
ebay.com link: FIRE By WILLIAMS 1987 ORIGINAL NOS PINBALL MACHINE TRANSLITE ART BACKGLASS MINT

Cabinet stencil:
http://www.twistedpins.com/products/stencil_kits/?ProductID=132

You should only be asking for stuff that isn't available

The cabinet stencil from twistedpins do not match the original art work they are missing a lot of detail and are placed on the paper wrong, I just went through redoing a Fire cabinet and found out the hard way

You could always bust out your paintbrush and do it by hand. This took A LONG TIME! You will also notice that I took some liberties with the design.

IMG_6311.JPG

IMG_6295.JPG

I did my own New Vector Artwork & produced my own Decals about a year & a half ago:

Used 3M Premium Vinyl with UV Resistant Ink and then Laminated with a Satin Finish to protect from scratches/etc...

Stu

A_Fire Small 45-168.jpg

A_Fire Small 42-169.jpg

A_Fire Small 49-289.jpg

A_Fire Small 51.jpg

A_Fire Small 52.jpg

A_Fire Small 54.jpg

A_Fire Small 58.jpg

wow!congratulation mr stu! your machine is fantastic.

Stu, I am still amazed at how well your turned out. Also how sweet your carpet is.

What a fun game.

Thanks guys... a little extra work goes a long way in restoring a game and they "play" just as nice as they look....

Stu, what did you use to start the redraw from? Did you take a huge, high res picture? Do you have a large flatbed scanner?

I ask because I've just been using the high res image and small scanner stuff for my redraws so far. I'm about to do a redraw on some cabinet side art(on a different pin) and want to get a nice, large high res image, but don't have the camera to do it just yet.

no camera, I use a see-through scanner.....

http://www.amazon.com/HP-ScanJet-See-Thru-Vertical-Scanner/dp/B0000C9ZJT

Stu

Ahh.... That makes sense. And then just piece it together?

Since the only company who had the stencils for this game has apparently gone out of business, does anyone know where I can get a stencil kit for this machines now? Any help would be much appreciated.

I have considered trying to draw these myself, however I am not sure what color the obvious brown is applied first or the color codes.