Page 15.....Awesome!
Used set of Fire smoke plastics for sale.
$20 shipped usa.
Pm me.
20200805_174316 (resized).jpg
Added over 4 years ago: Gone!
(Topic ID: 78414)
Linked Games
-
Fire!
Williams, 1987
Topic Gallery
20200805_174316 (resized).jpg
Added over 4 years ago: This box has been in storage way to long.
15 Fire houses for sale.
Would love to sell as one Lot.
These are No Good seconds from run in 2008.
The front entrance plastic gets to thin towards bottom.
Mostly offering these up if someone wants the decals off them.
The black on top most all have scuffs, big and small.
2 have breaks of entrance. The other 13 have the thin plastic mold. 2 of set are kinda acceptable to put in games. However, what you already have will be better.
$50 for whole lot. Plus shipping depending on location.
20200805_174157 (resized).jpg20200805_174113 (resized).jpg20200805_174056 (resized).jpg20200805_174043 (resized).jpg
Added over 4 years ago: Sold!
Fond Du Lac, WI
Quoted from Ericpinballfan:[quoted image]
[quoted image]
Did any of the other buildings ever get reproduced? My center building is basically flawless.
Why hasnt anyone made the plastic ramp where the ball locks. The end of mine are both cracked.
Quoted from Scrimmbo:Did any of the other buildings ever get reproduced? My center building is basically flawless.
Quoted from Scrimmbo:Did any of the other buildings ever get reproduced? My center building is basically flawless.
No sadly. It was the only house made at the time. Why they even just made the one house is a mystery.
Quoted from finnflash:Why hasnt anyone made the plastic ramp where the ball locks. The end of mine are both cracked.
Because the molds have never been found.
Toyotaboy makes awesome bridge brackets.
Go back a page.
Quoted from Ericpinballfan:No sadly. It was the only house made at the time. Why they even just made the one house is a mystery.
Because the molds have never been found.
Toyotaboy makes awesome bridge brackets.
Go back a page.
Can verify, the bridge brackets have improved my fire! considerably.
1 week later
New club member, picked up a very dirty one and starting the teardown. Having a bitch of a time getting the right rescue ramp off of the playfield. Can someone verify that the ramp flap posts are screwed directly into the playfield? Even trying to unscrew them isn't working. Looks like these were added later and are a size too big.
IMG_20200816_135210 (resized).jpgIMG_20200816_135252 (resized).jpgQuoted from truemagoo102:New club member, picked up a very dirty one and starting the teardown. Having a bitch of a time getting the right rescue ramp off of the playfield. Can someone verify that the ramp flap posts are screwed directly into the playfield? Even trying to unscrew them isn't working. Looks like these were added later and are a size too big.
[quoted image][quoted image]
Yes confirm they’re through. They’re not really threaded in but it’s tight fit. You will have to tap them out from the bottom through the top. I believe mine were tight coming out too. They’ll come out.
Quoted from dmacy:Yes confirm they’re through. They’re not really threaded in but it’s tight fit. You will have to tap them out from the bottom through the top. I believe mine were tight coming out too. They’ll come out.
Perfect, that's what i needed to hear! Don't want to break anything (especially since everything in this game is unobtanium!)
1 week later
Just found a couple of these that were spares when I was in the Club, they are NOS original WMS parts! If anyone needs these, PM me.
13A184FB-45CD-446C-9A8A-5A51FE68A8BC (resized).jpeg317E3BF4-5385-4BC7-BF4F-4B569601FF23 (resized).jpegstarted a new post for ramp support brackets because I had to edit so much:
1. porsche4me - 1
2. finnflash - 1
3. jkroeck25 - 3
4. truemagoo102 - 1 set
5. NewPinInTown - 1 set
6. mIkea - 1 set
We are at 8 (ordering)
Milton, ON
Quoted from toyotaboy:Updating the wait list for ramp support brackets:
1. dmacy -1
2. porsche4me - 1
3. finnflash - 1Added 8 days ago: 4. jkroeck25 - 1
Added 8 days ago: 5. truemagoo102 - 1 set
Added 2 days ago: NewPinInTown - 1 set
I would be in for a set.
Quoted from mIkea:I would be in for a set.
YES!!
Does anyone have a good hi res scan of the spot under the house? (The ADV. X inserts and the flame decals that are wrecked on EVERYONE'S game) - I want to touch that spot up but I can't find a game without wear right there.
Quoted from finnflash:Here is a pic of all the inserts, does this help?
[quoted image]
Yeah I found that one too- it's a little too low res to make a trace correctly. Thanks though!
1 week later
sorry for the delay, kicked off the ramp support job today. I should have them early next week. I'll PM everyone that was interested when they come in.
Added over 4 years ago:brackets came in yesterday.. forgot to order hardware. I'll PM everyone that wanted a set tomorrow night.
1 week later
Quoted from toyotaboy:sorry for the delay, kicked off the ramp support job today. I should have them early next week. I'll PM everyone that was interested when they come in.
Added yesterday: brackets came in yesterday.. forgot to order hardware. I'll PM everyone that wanted a set tomorrow night.
Awesome!
Quoted from finnflash:Does anyone know where these plastics go on Fire?
[quoted image]
I think it's come up before in this thread, but I'm pretty sure the consensus was no one seems to know where those would go.
2 weeks later
Quoted from toyotaboy:we're 4 sets away from another run of brackets.
Added 51 days ago: only 3 more
i want a set of those brackets
thank you!
Quoted from robotron:i want a set of those brackets
thank you!
that last run sold out
Next run
robotron: 1 set
shabazz18 - 1 set
Added over 4 years ago:yaksplat - 1 set
Added over 4 years ago:grbgemen - 1 set
Quoted from robotron:flipper covers and fiery orange led strip on through. now if someone can make a decal for the front of the hydrant it would be a cool mod.
[quoted image]
I don't know if anything would stick to rubber very well. You would almost have to replace the post.
The sound on this game is lacking IMO. It sounds muddled and unclear.
The guys at Pinsound say there are working on a replacement sound system for Fire!.
Would replacing the ROMS help?
MATT'S BASEMENT ARCADE
FIRE PINBALL - SOUND / SPEECH ROM SET, Sound / Speech 3 Rom Set [U4, U21, U22] Version L-2 (This listing is the most current official release).
Much thanks,
Quoted from wolftownjeff:The sound on this game is lacking IMO. It sounds muddled and unclear.
The guys at Pinsound say there are working on a replacement sound system for Fire!.
Would replacing the ROMS help?
MATT'S BASEMENT ARCADE
FIRE PINBALL - SOUND / SPEECH ROM SET, Sound / Speech 3 Rom Set [U4, U21, U22] Version L-2 (This listing is the most current official release).
Much thanks,
I've only played a few over the years, but I think they all sound that way. I would be interested in hearing the pinsound version when it comes out.
Budapest
Hi Guys!
i am working with my Fire! Pinball unfortunately the special screws are missing
(the one what connects the ramp with the ramp lifting mechanism.
I have found one screw but i am not sure this is the right one.
Should the part be reel shaped or have an incision at the connection point with the ramp ?
Can i buy this 2 special screw somewhere or subtitute with any other screw ?
Thanks in advance!
IMG_20201022_143522 (resized).jpgIMG_20201022_143543 (resized).jpgIMG_20201022_143548 (resized).jpgIMG_20201022_143556 (resized).jpgQuoted from csab00:Hi Guys!
i am working with my Fire! Pinball unfortunately the special screws are missing
(the one what connects the ramp with the ramp lifting mechanism.
I have found one screw but i am not sure this is the right one.
Should the part be reel shaped or have an incision at the connection point with the ramp ?
Can i buy this 2 special screw somewhere or subtitute with any other screw ?
Thanks in advance!
[quoted image][quoted image][quoted image][quoted image]
I think this is what you're looking for
https://www.marcospecialties.com/pinball-parts/02-4429
I think your picture is the correct part, it's just wore down really bad.
Quoted from Scrimmbo:I think this is what you're looking for
https://www.marcospecialties.com/pinball-parts/02-4429
I think your picture is the correct part, it's just wore down really bad.
Thats it!
Nice detective work.
Quoted from robotron:can any of you tell me what the gate on rs lower playfield by sling is for? i am missing the gate wire i guess the ball would come in from the playfield and back into shooter lane?
That is where the ball drops out of the right side lock. I guess it's there to keep the ball from getting in through the out door.
edit: if I understand what you're talking about!
Quoted from Scrimmbo:That is where the ball drops out of the right side lock. I guess it's there to keep the ball from getting in through the out door.
edit: if I understand what you're talking about!
corrected. i was just looking at it. the game is new to me like most pins and just as you described. i ordered the wire from marcos. thanks
Quoted from Scrimmbo:I think this is what you're looking for
https://www.marcospecialties.com/pinball-parts/02-4429
I think your picture is the correct part, it's just wore down really bad.
Thank you!
I have found an another pin crank also for Williams pinball.
The second one is more thicker.
I am not sure what is suitable for Fire!
Quoted from csab00:Thank you!
I have found an another pin crank also for Williams pinball.
The second one is more thicker.
I am not sure what is suitable for Fire!
https://www.marcospecialties.com/pinball-parts/02-4268
https://www.marcospecialties.com/pinball-parts/02-4429
This one seems to match the ramp lifting mechanism from the Fire! manual, which is listed there as Ramp Lifting Mechanism B-11304.
edit: looking through the manual I can't seem to find a part # for the actual part you're looking for 
Quoted from toyotaboy:that last run sold out
Next run
robotron: 1 set
I'm in for a set
1 week later
Quoted from robotron:in fire! there is a callout i believe “mufasa” a reference to king. i heard this in pharoah pin also but that makes more sense. anybody know the —back-story ?
Weird, I have both machines and have never heard this. When does the call out happen?
Quoted from Scrimmbo:Weird, I have both machines and have never heard this. When does the call out happen?
just happens randomly while playing.
M = Male voice
W = Woman's voice
C = Cow
H = Horse
M-"Save the Girl"
M-"Yah!"
M-"I can't!"
M-"Move the hose!!!"
M-"Bring up the ladder!"
M-"Break the window!"
M-"Arghh!! Tony is trapped!"
M-"Whoa! Andre trapped!" * I hear this one as woah! Hans is trapped.
M-"Help her!"
M-"It's spread'in!"
M-"Another Engine!"
M-"Nice job, Lad!"
M-"We've lost her!"
W-(Scream)
W-"Save my Baby!"
W-"It's about time!"
W-"Get me outta hear!"
C-"Moooooooo!"
H-"Wehehehehehe"
This comes from the rulesheet for the game found on IPDB. So it's not official, but I think it's pretty close.
Hello!
I have som problems with my Fire!
The ledder is going up and down all the time.
The engine for the ladder starts when i start a game.
I really dont know where to start 
Ty for your help!
Quoted from MrAztec:Hello!
I have som problems with my Fire!
The ledder is going up and down all the time.
The engine for the ladder starts when i start a game.
I really dont know where to start
Ty for your help!
I would start with the switch under the motor cam. I think that's the only way the game knows whether the ramp is up or down. May just need an adjustment of the actuator, or it could be a broken wire or something.
fire sw. (resized).jpgPromoted items from Pinside Marketplace and Pinside Shops!
Reply
Wanna join the discussion? Please sign in to reply to this topic.
Hey there! Welcome to Pinside!
Donate to PinsideGreat to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
