You're currently viewing posts by Pinsider fredsmythson.
Click here to go back to viewing the entire thread.
Williams Eager Beaver Schematic:
https://pinside.com/pinball/forum/topic/williams-eager-beaver-drop-targets-help-needed-#post-5767802
I'd start with the easiest problem - no lights on the playfield, no lights in the backbox. Looking at the Eager Beaver schematic, there are two fuses in the 6-volt lamps circuit. You need to confirm that 6 volts are getting to these two fuses / fuse blocks. These are the only items needed to get the general illumination working on the machine.
Quoted from ArgosySK:3. Lights don't work.
All of the back box lights are share a common fuse.
Ensure the fuse is the correct rating and that the Jones plugs are fully seated.
Then look for a broken wire/solder joint along a common wire strand.
I would suspect is close to the lights that do work.
Check you schematic foe any switches that maybe in the circuit.[quoted image]
You're currently viewing posts by Pinsider fredsmythson.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/williams-eager-beaver-help?tu=fredsmythson and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.