Aztec
Williams, 1976You're currently viewing posts by Pinsider zacaj.
Click here to go back to viewing the entire thread.
Can't hurt to replace the bridge. Usually they're fine but I have had ems with weak pops where replacing the bridge fixed it.
Rebuild can't hurt. Gap the switch as close as possible without machine gunning.
Quoted from TreyBo69:Check the EOS switch on the pop as well.
There's no eos
Quoted from northstar-:The way you can make them stronger is to measure the resistance in ohms across the coil with the wires off and then find a coil that is the same size so it fits with 1/2 less in ohms .5
Another way you can take the paper off the coil carefully with a razor blade and slip it under the edge to reuse the paper then find the outer wire and unwind the wire from the coil to lower the ohms i wont go more than .4 or .5 ohms less. Try one coil and see if its the strength you like.
This really shouldn't be needed on Williams DC pops. They're usually crazy strong
You're currently viewing posts by Pinsider zacaj.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/williams-aztec-weak-pop-bumpers?tu=zacaj and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Rochester, NY