(Topic ID: 251273)

WIlliams 1977 Big Deal - Bank Reset


By MD_Pinball_Dude

37 days ago



Topic Stats

  • 9 posts
  • 3 Pinsiders participating
  • Latest reply 35 days ago by MD_Pinball_Dude
  • No one calls this topic a favorite

You

Linked Games

Topic Gallery

There have been 2 images uploaded to this topic. (View topic image gallery).

BadSolder1 (resized).jpg
pasted_image (resized).png

You're currently viewing posts by Pinsider md_pinball_dude.
Click here to go back to viewing the entire thread.

#1 37 days ago

Among the last problems I am having with my EM, the bank reset is not resetting and I am not getting the Suit (Hearts, Diamonds, etc..) lights at startup. It works about 5% of the time. It looks like this coil (D-24-1400) is fired by either the Coin or Hole contacts making the series connection to 110V, but I see one set of contacts just to the right of these labeled "C and C-4" just under the toggle switch? Anyone know what this is?

In theory, if I just move the Coin or Hole contacts together, should this bank reset coil at least try to move? I found the fuse to it intact, but it is not a 1.6 Amp fuse, but a 1 Amp, Slow Blow.

I will add that I sprayed some professional grade contact cleaner (DeoxiT) into the Coin and Hole area contacts and it seems to be doing a little better after about 10 plays. I also removed all of the Jones Plugs from the head and base and cleaned these as best I could.

Sorry I cannot add a picture from this computer.

#3 37 days ago

Thanks, HowardR!

#4 36 days ago

I finally got into the works with a meter and find at least continuity from the Bank Reset coil, through the Jones Plug and up to both the Coin and Hole relay contacts. I don't see any arcing from the motor cog as it moves in the cam. I will pull the wires from the Bank Reset and measure the resistance of the coil tomorrow and see if the coil is actually connected on the other side to the transformer mains rail. Lots of fun.

#7 36 days ago
Quoted from Mikala:

With machine unplugged: Check C-1 on the outhole relay. Check for broken wires, cold solder’s. Check the wires on the D24-1400 coil. Also check the C-1 switch, that it is properly spaced.

This is my next check as I was looking at the wrong cam switch before. Learning something new everyday here.

#8 36 days ago

Followed the wiring from the coil, over the Jones Plug, across both Coin and Hole contacts and up to the Cam 4 switch - all good. Went back to the coil and looked really, really closely to the tab and saw a dry solder connection on the base of the tab to the coil wire! Arggggg...... All good. Now on to fixing the Player Index Reel.

Thanks to everyone's input and I have a new test jig to boot!

BadSolder1 (resized).jpg
#9 35 days ago

100% Done. Thanks everyone.

Promoted items from the Pinside Marketplace
$ 66.95
Cabinet - Shooter Rods
Super Skill Shot Shop
$ 66.95
Cabinet - Shooter Rods
Super Skill Shot Shop
$ 99.00
Gameroom - Decorations
Pinball Sales
From: $ 18.00
Apparel - Men
Pinside Shop
$ 159.00
From: $ 21.95
Apparel - Unisex
Pinball Wheezer
$ 221.00
Cabinet Parts
Tilted Pinball
$ 16.95
Playfield - Protection
ULEKstore
$ 30.00
From: $ 218.00
$ 35.99
Lighting - Interactive
Lee's Parts
$ 67.00
Playfield - Toys/Add-ons
Lermods
From: $ 5,599.00
Pinball Machine
Great American Pinball
$ 150.00
Playfield - Protection
Republic Of Pinball
$ 125.00
Cabinet - Toppers
Sparky Pinball
$ 16.95
Playfield - Toys/Add-ons
pinballmod
$ 37.00
Playfield - Toys/Add-ons
The MOD Couple
From: $ 9.99
Eproms
Matt's Basement Arcade
$ 90.00
Lighting - Under Cabinet
Rock Custom Pinball
$ 5,799.00
Pinball Machine
Classic Game Rooms

You're currently viewing posts by Pinsider md_pinball_dude.
Click here to go back to viewing the entire thread.

Hey there! Got a moment?

Great to see you're enjoying Pinside! Did you know Pinside is able to run thanks to donations from our visitors? Please donate to Pinside, support the site and get anext to your username to show for it! Donate to Pinside