Sounds almost as if you have battery alkaline damage on the MPU. Can you post a picture of it?
You're currently viewing posts by Pinsider PinballManiac40.
Click here to go back to viewing the entire thread.
Quoted from snyper2099:I understand this. It is not the case with the power supply in question. Although some of the resistors could have suffered from this deterioration and had the correct color bands, others on that same board HAD the wrong banded colors on them, and were installed from the factory that way. I have been doing this long enough to tell if a board came out of the oven that way, or if it had some components replaced at some point. The bands were incorrectly read from the factory in that case (grey for blue in that specific example). The lesson to be learned is not to assume the correct parts were installed from and factory producing boards.
If it is true having the wrong resistors, what part locations are they? I have a couple of boards I need to check over.
You're currently viewing posts by Pinsider PinballManiac40.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/why-is-my-pinbot-freaking-out?tu=PinballManiac40 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.