Paradise Valley, AZ
Getting a little concerned about future wear on the Gobble hole, so I found an old Mantis hole protector, in the parts stash, and decided to see if I could make it work. Did have to grind it down to about half the original thickness and trim to about 3/4 quarters of the original full circle to accommodate the routed lane above the hole. Also put down mylar on the routed lane, plus some down in the hole itself. A little silicone between the protector and hole, then let it sit up over night with a cue ball sitting on it for pressure. Now, no more worries.
All in all, pretty easy to do and thought this might help others with the same concern.
Tim
whoa nellie 020 (resized).JPGwhoa nellie 013 (resized).JPGwhoa nellie 014 (resized).JPGwhoa nellie 006 (resized).JPG
