how did you solve your missing line display problem in the middle of the Pin2DMD-XL of your Baywatch pinball machine.
because I have the same problem on my pin2DMD-XL

thank you lucky1 for your answer, or I can find the firmware XL

I have a problem with my pin2DMD XL image remains frozen on pin2DMDXL sega 192x64.
I flashed the version 2.54pin2DMD XL.bin
I tried the custom version, but the DMD does not display anything and does not turn on.
the .pal color file and been made by color prism.
I flashed using this:

Use the .bin file with the ST-Link Utility to upload the firmware to your device using the ST-Link interface http://www.st.com/web/en/catalog/tools/PF258168

I have to use that too, if so I do not understand how to do it.

Use the .dfu file with the DfuSEDemo Utility to upload the firmware to your device using the USB port in dfu mode. http://www.st.com/en/development-tools/stsw-stm32080.html

here is a picture of myself that I have on my SD card
and another of the image I have on the pinball display
thank you for your help, because the configuration for me is complicated to install

20180416_184113[1] (resized).jpg

20180416_182955[1] (resized).jpg

20180416_182609[1] (resized).jpg

thank you lucky1 for the information,
here are two pictures of the connection
concerning the files, I conceal the activation key with the original name and the color file, the other two files I delete them (pin2dmd.dat and update.ok).

20180416_201745[1] (resized).jpg

20180416_201854[1] (resized).jpg

here are the photos .
for files, I keep in the micro SD activation key with the original name and the color file?
the other two files I delete them (pin2dmd.dat and update.ok)?
Is the ribbon cable on the shield connected correctly?

20180416_230540[1] (resized).jpg
20180416_230722[1] (resized).jpg
20180416_230901[1] (resized).jpg

the original dmd worked very well,
I simply disconnected the ribbon cable from the old plasma DMD to put on the shield of the nucleo.
I will test tomorrow, by removing the files from the SD card, as cited above
no danger if I reverse ribbon cable of the shield?

thank you lucky1for your help,
I got a 74ls123 on a V3 shield,
do I miss something else?
I had new info about the shield V4, there would be a strappe to do on shield,
here is a picture of my shield and another one of the modification to make
the little red line(inside the yellow circle)is the missing connection
can you confirm if I have to do it?

1365[1] (resized).jpg

20180417_101911[1] (resized).jpg

here is the 74ls123 installed

20180417_103634[1] (resized).jpg

I made a photo with the 74ls123 removing from the bracket,
for me it looks good, can be lucky1 can confirm

20180417_124245[1] (resized).jpg

good everything works now, thank you so much to lucky1 for that precious help................... ......

even a small question,
is there a file already colorized pin2dmd-xl for the pinball baywatch?

thank you Malenko for the link,
I just need to put on the SD card the file pin2dmd.sfq and the file pin2dmd.pal?

thank you Malenko, I will test that .................