Quoted from SantaEatsCheese:

You were right! I threw the $3 replacement chip in there and she fired up like a charm! I still had to hunt down a burn fuse to get the flashers and toppers to work again, a broken wire in the Yeti motor, and am troubleshooting gremlins in the ball trough but she's 99% there!
Now that my machine is working again I feel comfortable unloading my spare parts including a few brackets that are out of stock everywhere.
Full video of the parts available below.
[quoted image][quoted image]

Quoted from SeaLawyer:

What’s wrong with this picture?

Quoted from jawjaw:

Anyone have an upper pf wireramp like this? I recently learned that the wireform should have an extension that fits in the hole at the bottom circled in the pic. Mine does not. It just hovers over the hole and not looks a bit off. It works okay mostly but hard to get the top bolder to sit correctly and part of the reason seems to be this wire form is in the way. I'm guessing it's some aftermarket one that does not fit correctly but not sure. Only replacement part I can find is on coinoppartsetc.com but it's $80.[quoted image]

Quoted from zene10:

Yes, you probably blew the 5V regulator(6-A, 4.5-Vto14-VINPUT, NON-ISOLATED, ADJUSTABLEWIDE-OUTPUT, SWITCHING REGULATOR , part
PTR08060WVD).
I blew it in the past working on the machine while on.
Cheap and easy to replace.
https://www.arrow.com/en/products/ptr08060wvd/texas-instruments

Quoted from zene10:

I have a rottendog board. Called rottendog and their tech walked me through troubleshooting and That is the part I blew.
I do not think the original board has the same type of regulator.