Hey All, new member of the club. I picked up a decent Whitewater, but I've run into some issues as I've gone over it. I have a thread over in the tech section if anyone has a moment to go take a look, I would appreciate it. Thanks! https://pinside.com/pinball/forum/topic/white-water-weird-switch-issue

On another note, while working on things, I removed the back mountain range and I noticed way down in the back, on the lower playfield, below all the ramps, there is a bracket of some kind with a semi-loose lock nut on it, and what appears to be part of a switch. There's no actuator on the switch, and the whole item appears to be doing nothing. I don't see any reference to this switch in the playfield chart from the manual, but maybe I'm missing something. Can someone tell me what this is? I can provide better pics if needed.
WH2O_switchinback (resized).jpg

WH2O_switchinback1 (resized).jpg

Okay, I'll dig some more and try and get better pics. Location-wise, it's on the lower playfield loop, almost directly behind the VUK that leads up to the ramp behind bigfoot.

WH2O_weirdswitch (resized).jpg

Damn, that stinks. Good to know though, I appreciate it. Is there any chance someone has a good picture of that area with the switch/bracket intact? I would greatly appreciate it.

Thanks!