Pittsburgh, PA
Looking to join the club. Reach out if interested cash or trade!
Added over 6 years ago:TnA or afmr
(Topic ID: 57710)
Linked Games
White Water
Williams, 1993
Topic Gallery
You're currently viewing posts by Pinsider delt31.
Click here to go back to viewing the entire thread.
Quoted from joetechbob:If anyone is looking for a TNA:
https://pinside.com/pinball/market/classifieds/ad/66764
hey get in line ; )
2 weeks later
Quoted from smiley:anywhere that sells automotive 194 bulbs, even walmart.
So would something like this work? I also just joined the club. Got an absolute knockout. HEP!
so I mistakenly bought this coil from marco. anyone know if this will still work (orange mid range - left bottom flipper). Apparently there is FL-15411 and the one I bought FL1-15411
Quoted from TheLaw:It's the exact same coil just diff prongs for slide on connectors.
Thanks but I'm not home with the machine. I doubt this machine uses slide on connectors. Can I still solder the wires onto these?
Just wondering if I need to cancel these and buy the non slide on ones....
I noticed these 194 bulbs come in a Long Life (LL) version. Would those work still or do you need the standard ones?
https://www.amazon.com/gp/product/B00BJEZEL6/ref=oh_aui_detailpage_o01_s00
Edit - I'll just get the normal ones
Quoted from PinballManiac40:Non-ghosting LEDs?
I bought these - I think they are right 194 incod but they are long life which might be causing it. Ordered 194 from marco and will replace them.
https://www.amazon.com/SYLVANIA-Long-Miniature-Contains-Bulbs/dp/B00BJEZEL6
Quoted from Davi:Yes, there is a way, with upgraded PCB by GLM.
http://www.greatlakesmodular.com/index.html?http://www.greatlakesmodular.com/products/pinball/wh2o_clb.html
Wow pretty cool
OK - so now I need some help with the topper. I bought brand new 194s from marco. Turned on and it was perfect. After 10 min the blinking started to slow and now the topper isn't as impressive. All lights work but not blinking fast. Is there something going on here? Anything I should check first? Lights are very hot after turning it off. They still work but the effect is limited b/c blinking is slow on some or none at all. Thanks!
Video of the slower blinking:
Video of when I first put in the new 194 (older 194s were Long lasting and prior to that I believe might have been LED but didn't burn out)....this is when it worked!
Maybe it's not getting enough power?
EDIT - prob chase lamp board. I'm going to have it serviced....
Quoted from Jam_Burglar:I agree that seems like the best place to look. Nice topper! I don't see any bubbles.
thanks - there is a very minor wrinkle but the topper is really stunning. It's a HEP restore and the new nicest pin I've ever owned and I only like nice pins. I'll take some pics too - such a great look game in general and hard to find in very good quality (not just a "nice" one).
Quoted from JimFNB:Looks like a screw cap. Should be available at any hardware store or big box home center --
e.g., https://www.lowes.com/pd/Hillman-1-4-in-x-1-4-in-White-Plastic-End-Cap/3012662
Nice thanks!
Quoted from Cserold:Sweet. Chris did a WH2O for me as well. Curious...what color did he paint inside of cabinet and the metal piece at top of back box? Did he do black or blue on yours? Very nice topper indeed!
black
Quoted from Blitzburgh99:This game is kicking my tail...the cave kickout is hitting the metal ball guide and sending ball directly to bounce out. No chance of getting the right flipper on it to try and control. Only strategy I have now is to “bump” the game forward, with hopes of getting the ball up to the river targets on kick outs. That’s fine when it’s just one ball and I can focus. But when multiballs are going, it shuts them down in a hurry with drains down the bounce back.
Any suggestions? Where is that cave kickout supposed to be going to?
Put a piece of foam in b/w the coil spring and coil for the kickout underneath the table and it will change the trajectory. You can move the foam around it make it thicker for more resistance
Quoted from Blitzburgh99:Any other cave kickout tips as I wrap this up and give the game a few test games?
Nope.
How much tension should the shooter have? Mine has a good amount. Feel like the shot is a little easier that way? Anyone else?
Quoted from Sciddleybop1980:Yes he’s a UK seller. Judge Dreads Pinball. Im not a huge modder but this is a must have on WH20.
Whilst you’re ordering from him you should also get the rafts and mountain lighting strip.
Do you think it blocks too much though? I was thinking about it but it does block some of the ramp etc
1 week later
1 week later
how do you make the skill shot harder on the plunger? Maybe change out the plunger spring? Mine seems too easy right now (I'm not very good!) - pressure is pretty tight so I'm thinking a loose feel would be harder.
Anyone that has it working really well know the spring or setup they can share? Thanks
Promoted items from Pinside Marketplace and Pinside Shops!
You're currently viewing posts by Pinsider delt31.
Click here to go back to viewing the entire thread.
Reply
Wanna join the discussion? Please sign in to reply to this topic.
Hey there! Welcome to Pinside!
Donate to PinsideGreat to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
