Quoted from Fifty:

Hello White Water owners,
Is there anyone out there that could tell me what type of screw is used here? I am trying to stay as close to original as possible. I'm guessing it's a #6 Phillips flanged head screw, but I'm not positive. I need the size and length.
Thank you!

Quoted from judremy:

algrande,
Looks great! Where did you get those bigfoot target decals? I like my other targets being transparent, but would love to get ahold of those.
Also, I hope you adjusted the ball guide on the whirlpool shot so that the right-most post is shorter. If not, your bracket holding the switch above the ramp (under the rear mountain) will get broken.

Quoted from rdbronko73:

Has anyone had their whitewater mountains custom painted by Modfather that they could post pictures of. Looking for his summer and winter theme paint jobs.
Thanks

Quoted from KJS:

Hi all.
Wondering if someone can help. Are the hangers on the playfield supposed to be short or long?
Reason I ask is the rear of the apron is sitting up high when mounted to the hangers.
Thankyou

Quoted from Soulrider911:

Annd the top is done! Just need to move on to the cabinet[quoted image][quoted image][quoted image][quoted image]

Quoted from djreddog:

What does the ocd boards do?

Quoted from Devinsupertramp:

Looking for some feedback/advice on WhiteWater issue. One of the cables under my machine came disconnected. A molex cable. I'm still new to having to fix my machines on my own. I ordered what I thought was the right Molex part, bought the Set of 2 - 4 Pin Molex Male Plug with Pins .093 from GameRoom Guys. Ended up the part was a lot bigger than the original so wouldn't fit the female end. Anyone have any idea what Molex plug I need? And the best place to find one? Just spent the last 3 hours trying to find what the plug is I need with no luck :/ But it's part of the cable that hooks to the sensor of WhiteWater for the ball exit from the Whirlpool. The two photos I have so the busted cable, and shows the new Molex plug I bought next to the original one, as you can see it's to big.
[quoted image][quoted image]

Quoted from Kneissl:

Jeez. I was kinda bummed with cpr after fish tales with the bad shooter lane AND they never replied to my email asking if they had a recommended work around. Micro doesn’t sound much different.

Quoted from RCSP:

I took this apart and didn’t take enough pictures. I don’t remember the gap between the ramp and where the new cliffy protector is installed.
Also, what goes in those missing screw holes?
Thanks!
[quoted image]

Quoted from Jherre6:

What settings is everyone using for their GI and LED OCD boards?
Be curious to see how others have theirs configured.

Quoted from nerdygrrl:

I hope to start my Whitewater restoration soon. The PF I had lined up fell through, it had planking that was not noticeable in photos. Does anyone have an original that they swapped out that would be a good candidate for restoration that they may want to part with?
Has anyone installed a Mirco? If so how do you like it?

Quoted from Drac:

I added a few pine trees to my game. I think they look quite good scale-wise and fit the theme. I bought them from eBay and when received them found that the green stuff on the trees can drop a bit on the playfield. I sprayed a little clear coat on them before I mounted them and all good.[quoted image][quoted image][quoted image]

Quoted from yzfguy:

If only they would ship to the US!

Quoted from yzfguy:

Please let me in on the secret, I have wanted several items for a few years and have been unable to order. Have you successfully had items shipped to the US?

Quoted from lrosent345:

I really don't know what's going on with Pinball Center but I can tell you they are selling unlicensed versions of Bally/Williams artwork. If they import that material into the the United States. customs would seize their shipments as illegal knockoffs.

Quoted from Paseb:

new owner! I just closed a deal yesterday. Will pickup monday.
already ordered brian allen stuff.
question, is the pinduino mod a must have mod?
where can i order the little pine trees?
anyone ordred these?
ebay.com link: itm
thx

Quoted from Pinkitten:

Added some art to the coin buttons…
[quoted image][quoted image]

Quoted from EEE:

Evening edit… I was shown by someone much smarter than me where the two wires go. They are for the Bigfoot head motor.
I am reassembling our machine and have an open (maybe cut?) set of red and white wires off of a 4-pin connector to the upper playfield. The machine hasn’t been played for years, so it’s been a learning process.
Could one of you verify if there is one, or possibly two Bigfoot Body flasher(s) on the upper playfield? The harness for the flasher that mounts underneath the nearby ball guide has one set of red/white stripe and black wires that seems correct.
I cannot see where either a possible second flasher might mount or where the red& white wire pair goes. In the picture it is the red and white pair that is zip-tied to the harness.
[quoted image]

Quoted from Knxwledge:

Ive officially joined the club! It's not gonna be an easy ride though. It's complete but the top playfield is 95% disassembled and sitting in boxes. Excellent original playfield, cabinet has typical wear.
The game was booting up but would keep resetting before it could get to attract. I changed caps and bridges on the driver board and that fixed it.
I plan to do a full restore eventually but first I'll focus on getting the game reassembled (new ramps, boulders, plastics, Cliffys, LEDs, etc). Eventually will do Radcals, chrome side rails, lockdown bar and legs I think.
[quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image]
[quoted image]