Yes it does (I make the mod). The light controller board attaches to the motor controller board for Bigfoot. No cutting, alligator clips and is 100% reversible.

Bigfoot lights up any time his head moves and when he stops and looks at you. Light is off when he is looking away from you (when he is "hiding"). Just sent Terry a new batch (looks like he is out right now). Not doing the hard sell here but there are about 25 left and they will not be made again. Too much cost in making a small run of boards, laser cut bracket, etc.

As others stated LED's in the topper will really diminish the waterfall effect (just at the PHOF, had all blue LED's in the topper, was not good ). If you do want to change them remember they are 12V not 6.3V like most other bulbs in your game. I ran the standard blue LED's for GI around the upper sides and back of the playfield. Everything close to the player and the middle of the playfield were incandescents. As you have the spotlight mod I suggest you darken the Bigfoot area by using blue LED's, bulb condoms or even removing a bulb or 2. Really makes him pop when the light kicks on.

Thanks, I appreciate the compliment Lots of trial and error making this mod. For the cutout on the spotlight I use a bench mounted disk sander (one of those combination belt/disk sanders), easily went through a dozen methods before I got it figured out (getting the circuit right was the real nightmare). I made a jig to mark the cutouts for repeatability but you should be able to eyeball it for making one. BTW, saws and spotlights don't play well together, I'm lucky I still have 10 fingers

http://www.pinballlife.com/index.php?p=product&id=2486

Thanks! I have gotten a lot of good feedback over the years. Most have said it should have been a feature that was included in the game. In fact I have had a few people buy it that said they *hate* mods but got this one because it looked like a factory item.

The "L"bracket attaches to the wireform under Bigfoot's cave, the spotlight then attaches to the bracket. I wanted the spotlight to be as hidden as possible (most of it is under Bigfoots cave) because I thought it would be out of place to have a spotlight just sitting on top of a rock. I wanted to keep the game as "organic looking" as possible up there so that's why it is hidden. It is real tight in that area that is why I needed to modify the light for clearance.