I have a HUO Take Five cocktail table i can bring to the show will a deal worked out in advance.
I have a complete streaming setup for sale. All OotB.
1x - Logitech C920 (1080p @30fps for playfield)
2x - Microsoft Lifecam HD3000 (For DMD/Display and Player)
1x - Chauvet Lighting Stand (To bring it all together)
$100 FIRM.
31S7L1sv1cL (resized).jpg61MKPmZWAiL._SL1500_ (resized).jpg91mie-GfV-L._SL1500_ (resized).jpg
EM back-glasses available in the indoor flea available for pre-sale (pix available upon request):
GTB Cleopatra - 95$ (framed) condition 8.5
GTB Jumping Jack - $75 condition 8 (some red touchups)
BLY Expressway - 75$ condition 8
WMS repro Beat Time $200 condition 9.5, a few small scratches in opaque areas
WMS Star Pool $65 Condition 7.5
Will have a few wall hangers as well - cheap - Bally Wiggler, GTB NOW, others
59854421-F929-459E-B6C7-676AC6029565 (resized).jpegA9BBBED0-CC3B-4856-9C9C-41C04447B507 (resized).jpegC61BE1B2-B9AF-4993-86AC-0ADD9360EB8C (resized).jpegQuoted from Dono:EM back-glasses available in the indoor flea available for pre-sale (pix available upon request):
GTB Cleopatra - 95$ (framed) condition 8.5
GTB Jumping Jack - $75 condition 8 (some red touchups)
BLY Expressway - 75$ condition 8
WMS repro Beat Time $200 condition 9.5, a few small scratches in opaque areas
WMS Star Pool $65 Condition 7.5
Will have a few wall hangers as well - cheap - Bally Wiggler, GTB NOW, others
[quoted image][quoted image][quoted image]
Forgot to add:
WMS DAFFIE plexi, NOS $125
I have a Williams system 7 display driver board (edge connectors) along with 4 7 digit and 1 credit display for sale. 2 of the displays are working (have some burn in). I changed the ribbons and all four players will work coming from the board, its just the 2 displays themselves not working. I didn’t check the credit one, the board looks to be in good shape. $100
Original Black Knight backglass. Has usual flaking and has been sealed at some point. 75 OBO
Transformer board out of a Sinbad. The small transformer is fried and desoldered. Everything else is there and was working when it was pulled. I have all of the wires labeled going to the small transformer. $65 OBO
Set of black non rib legs off a Black Knight 28 ½ “ $20 OBO has a good bit of wear and tear.
Set odd balls. 2 non rib 27 “. 1 non rib 28 ½” and 1 partial rib 28 ½” decent shape. $20 for the set or $6 each
Coin door from Atari pit fighter in decent shape. $30 OBO
Pictures can be found below.
http://s50.photobucket.com/user/troyster4242/library/?sort=3&page=1
Throwing this out there - I have a Ludwig "high school" snare with carry case. It's in great shape, head is still nice - I've had this since - wow - forever, and would like to find it a good home. Silver color.
Any drummers out there interested? I'd give it away for $50 OBO.
Quoted from billsfanmd:looking for a nice roller coaster tycoon live 60 min from the show.
PM sent
I have a Nice Original Pinbot Topper including wiring harness, lights, and resistor packs. No cracks can bring to show.
Don
Quoted from Pintopia:I have a Nice Original Pinbot Topper including wiring harness, lights, and resistor packs. No cracks can bring to show.
Don
Don,
I don't need one but those things can be tough to find so I am sure someone will be looking for one. It is nice you have the lights & wiring also. Hopefully someone will be all over it! Best of luck getting it sold!
Have a Gottlieb Rock that I would like to trade or sell for cash - preferably the former, if possible. Brand new rubbers and flipper bats along with a very good (8.5/10) playfield and cabinet - overall, a good player's game. It's a fun little game that was my first pin but I am bored of it and would like something new. Would prefer to trade for a game from a different manufacturer, but I'm open to all offers! I can probably bring to the show if asked.
Have a nice WW playfield and ramps and Ms PAC board and control panel.
I'm bringing all the following games for free play as well as for sale. I'll also consider trades +/- cash for other solid state machines (no EM's). If you want any more info about a specific game PM me. All of these work fine.
Williams Fire! 1750
Williams Super Star 650
Williams Gold Rush 500
Stern Lightning 1500
Bally Special Force 1600
Bally Lost World 1200
Bally Delta Queen 550
Doing a little fall cleaning, can bring to York show.
Flipper rebuild kit Data East / Sega sold
Bally MPU $10 sold
Flash Gordon pop bumper caps (5) $5 used
Bally legs rusted $10 sold
Skateball PF $100
Twilight zone plastic protector to place under plastics. Best offer
Dot Matrix board WPC fully tested $40
image (resized).jpegimage (resized).jpegimage (resized).jpegimage (resized).jpegimage (resized).jpegimage (resized).jpegimage (resized).jpegimage (resized).jpeg
Still looking for a single Williams 6 digit slave display unit (for a System 6) in good working order.
OK I finally got the all the games ready to go! Below is what I will be bringing for freeplay and for sale. All Games work 100%. I will also be bringing a few of the pinball lifts I listed earlier along with a bunch of stuff for the indoor flea market spot. Used Funhouse ramps and playfield, Bunch of plastics, star galaxy project toy pinball, backglasses Jungle Queen, Split Second, and sky jump and much more..
Joe
Gottlieb Victory
Gottlieb Atlantis
Stern Hot Hand
Williams Firepower.
Quoted from JodyG:A friend is bringing a nice Cue Ball Wizard and a players condition Shaq Attack.
Any idea what he is looking for the Shaq?
Anybody have a WPC coin door and/or a classic Bally coin door for a Future Spa? Would like good to great condition.
Quoted from Colsond3:Anybody have a WPC coin door and/or a classic Bally coin door for a Future Spa? Would like good to great condition.
I found an '80s Williams one that I threw in my "yard sale" box yesterday. Guess it's not what you need but somebody might care...
-Rob
-visit http://www.kahr.us to get my daughterboard that helps fix WPC pinball resets or my Pinball 2000 H+V video sync combiner kit
Quoted from Matesamo:Any idea what he is looking for the Shaq?
$1300, I believe. Everything works.
Quoted from Colsond3:Anybody have a WPC coin door and/or a classic Bally coin door for a Future Spa? Would like good to great condition.
Think I still have a couple of classic Bally doors but which style do you need, with the volume adjust pot or without?
Here's a long shot: would anyone traveling to York happen to have a 4724 IC? It's an 8 bit addressable latch. A 4099 will also do the trick.
Thanks,
Alan
Quoted from ibuypinballs:Already to pull out tomorrow morning. Looking forward to the show and to see if Rich stuck to his original t-shirt design. Everyone have a safe ride out.
I know that trailer is packed, hope you were able to close the doors.
The web site still shows the t shirt from last year.
Quoted from Flipperfun:Think I still have a couple of classic Bally doors but which style do you need, with the volume adjust pot or without?
Looks like without the volume pot. My Embryon had one, so I thought this would.
A6056EDC-D862-423A-8F3C-B827332D1540 (resized).jpegQuoted from jrpinball:Ready to roll. Just hope the rain holds off until after I unload.
I know right? If we can have one damn show without rain it will be a miracle.
Quoted from ckcsm:I know that trailer is packed, hope you were able to close the doors.
The web site still shows the t shirt from last year.
Chuck, thanks for your help loading up. Dont forget that backglass.
I have a nice RFM for sale. Cabinet has a few minor nicks but playfield is in great shape. Monitor is bright and clear. Everything works as it should. Had intended to redecal it and do a full detailed shop job on it to make it super nice, but haven't had the time and need the space. Will be at the show Friday only, game will be in free play area if not pre sold. $2750. PM with any questions or if you want more pics of anything specific.
IMG_20181010_192315 (resized).jpgIMG_20181010_192353 (resized).jpgIMG_20181010_192406 (resized).jpgIMG_20181010_192431 (resized).jpgIMG_20181010_192443 (resized).jpgIMG_20181010_192706 (resized).jpgIMG_20181010_192817 (resized).jpgIMG_20181010_192821 (resized).jpgIMG_20181010_192831 (resized).jpgIMG_20181010_192838 (resized).jpgIMG_20181010_192844 (resized).jpgIMG_20181010_192856 (resized).jpgIMG_20181010_192908 (resized).jpgIMG_20181010_193055 (resized).jpgQuoted from Alan_L:Here's a long shot: would anyone traveling to York happen to have a 4724 IC? It's an 8 bit addressable latch. A 4099 will also do the trick.
Thanks,
Alan
Hey Alan!
Will one of these do for you?
16F34316-7E45-4E1E-8867-96DC79E03E11 (resized).jpegQuoted from PiNDoCToR:Hey Alan!
Will one of these do for you?
Heck yes! I compared the data sheets and they look the same. Are you going to be there today (Thursday)?
Tanks,
Alan
The 6803 board set is available again as is the MM since that guy who was going to buy those has his funding cut by his wife! I will only be at the show on Saturday and can get the MM there if I deal is worked out but need to know by tonight since I will have to get two other machines I am taking delivered there Friday so will need to get those to a friend tonight. 6803 board set is from a Hardbody, $175. Price on the original MM is $8800 which includes and LED kit not installed yet, NOS spare plastics set and the original manuals. PM for more pictures & details.
01F16583-9D7B-4469-8C0C-935757FF3BB0 (resized).jpeg1E978C2B-67A6-4696-B976-0F2381AD7393 (resized).jpeg2F57584A-0F77-4182-A421-2A8B0576CF0F (resized).jpeg3898DCEA-A809-4FAC-92F1-437681B0CDB3 (resized).jpeg6081427D-C5FF-4C49-83B1-EBA16EC103D7 (resized).jpegC5AFF522-E949-4772-AFAC-72CE00C4B479 (resized).jpeg
BOP 2.0 w/ new playfield.
https://pinside.com/pinball/market/classifieds/ad/69175
Can bring to York with a deposit or trade setup in advance. Also has new mirror blades uninstalled. I'll be there Saturday.
Thinking of selling my Met Pro LED (metal backbox/round speakers)... ColorDMD, Laseriffic topper, shaker, spinners mod, 3D snake mod, fangs/tongue, cemetery gate mod, upper rollover crosses, orange plastic protectors, orange titan rubber, LED captive ball coffin mod, Sparky, Mystery hole and shooter lane protectors. Very nice machine. $5800 or $5200 without ColorDMD and topper...Can bring to show Friday or Saturday if prepaid. Pictures available upon request. PM if interested.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/white-rose-gameroomyork-show-2018-buy-sell-trade-and-swap/page/8 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.