You're currently viewing posts by Pinsider djreddog.
Click here to go back to viewing the entire thread.
I'll be attending again this year. I've been the past 2-3 years and have supported the show each time by bringing games and will do the same this year. One thing is for sure at the York shows, you always get FIRE!
Also Rich, when you read this, please REPRINT shirts from last year and make another shirt just like it this year! My Fiance is thoroughly disappointed she did not get a shirt from last year.
Quoted from Lermods:Check with pinballstar, joe is usually a vendor at the show.
Joe isn’t a Stern dealer. Cointaker will have 4-6 setup. Premium is done to a degree as they have one setup at Pinburgh and its playing awesome.
Quoted from Spiderpin:I missed the last two years but plan on coming this year. Just received my White Rose Gameroom Show letter today. Gotta get a shirt before they sale out. Do a reprint from last year.
This! My fiancé absolutely loved the design, but you sold out before I could snag one for her. Please reprint!!
Quoted from Pinball_Nate:Looking for a Laser Cue or Nine Ball...............
PM Sent
Back on topic. I will be bringing a Laser Cue for sale or trade.
Asking $1300
Here are the details:
-Nearly perfect NOS back glass from Mayfair
-Custom full size pool ball shooter rod (original shooter also included)
-Brand new legs, leg bolts & levelers
-Brand new Rottendog Display driver board and all LED displays
-Comet brand blue & warm white LED's throughout entire machine
-All boards have been professionally gone through, tested and repaired as needed.
-Power supply re-capped
-40 pin connector male and female side brand new
-NVRAM installed
-new rubber kit installed
Bad:
-Shooter lane has wear
-Lower playfield has a little wear and a spot of planking
-1 of the 4 lights on the P-O-O-L roll over is sketchy and may need replaced
-Cabinet is a little rough
-Target 5 drop needs to be fixed (Coil burnt up, which has been replaced, but I think the issue is the transistor also blew. I have transistors on order and hop to repair the machine this weekend)
Asking $1200. For sale or trade.
Here are the details:
-Nearly perfect NOS back glass from Mayfair
-Custom full size pool ball shooter rod (original shooter also included)
-Brand new legs, leg bolts & levelers
-Brand new Rottendog Display driver board and all LED displays
-Comet brand blue & warm white LED's throughout entire machine
-All boards have been gone through, tested and repaired as needed.
-Power supply re-capped
-40 pin connector male and female side brand new
-NVRAM installed
-new rubber kit installed
Bad:
-Shooter lane has wear
-Lower playfield has a little wear and a spot of planking
-Cabinet is a little rough
-Target 5 drop needs to be fixed(believe the transistor needs to be replaced, going to try and fix this before the show)
149463AF-5F09-4863-89E2-DBFBF1917512 (resized).jpeg3A6AD591-A42E-435E-A091-C56665BE79B5 (resized).jpeg3F1C8023-7D38-45B6-B218-A8A7AD3DEBE6 (resized).jpeg401B8EA6-6066-4DAE-888F-2538623F4FF0 (resized).jpeg7101C1FF-AC37-4B50-8E40-6340B7BD3805 (resized).jpeg921710DD-0B9A-4815-A8B0-FC834B901C0D (resized).jpegB5D07C7E-DC5F-4382-AAEC-B3C81DABCD60 (resized).jpegBA3206FB-C1B0-432B-AD18-A3BDDB1EE629 (resized).jpegB409D722-7232-4EFB-8478-B93D150D5F93 (resized).jpegCCDF3A17-CC37-447D-B672-6B4A95B195C0 (resized).jpegD2EB4448-22E8-463D-99CB-19E08F91E6D6 (resized).jpegE182669D-A0CA-4986-B25B-78FCF2719A07 (resized).jpegQuoted from ibuypinballs:Rich any pictures of the t-shirt design for this year?
He needs to do another run of last year’s design!
Quoted from JodyG:Rich unveiled the preliminary shirt design early last year, and it set off a firestorm on social media. He chose to change nothing, double down and continue to go through with having the shirts made and sold out of them at the show. Sure, it was a "success" in the moment, but how many people were turned off from coming to the show at all after the initial announcement and social media storm? I want to see this hobby grow, and times are changing. This isn't 1986 any more. One of the great growing and untapped markets of this hobby are among women and kids. There are likely many women out there who stay away from pinball due to the greasy, sexist stereotypes that are reinforced by the t-shirt design from this show. Yes, it is a free world...but when a promoter of a show decides to market the hobby in this manner, I am personally not going to support it. For someone that wants to see the show get bigger, why would you purposely try to alienate a portion of your market? You should be looking to attract as many different demographics as you can, not placate to a vocal minority. If you have a problem with me standing up for what I believe in, Chip/Rich...i'm sorry you feel that way. Good luck with your endeavors...my involvement either way is pretty minuscule in the grand scheme of things.
For the record, my fiance is pissed that she did not get one of these shirts. I've asked Rich numerous times to make another batch. This was the best shirt design by far.
Quoted from PoMC:Didn't know there was a show t-shirt. I'd like to buy one if there's one available. From the way Jodi is describing it, I def want one!
Here is the design from 2018:
whiterose (resized).jpegQuoted from Jgel:I have been to the show to play games in the past but never really to buy parts. I actually need some stuff. I was about to place an order with Marco but figured maybe I will wait for the show to support vendors there. Obviously I can't get everything but can I get flipper rebuild kits and drop targets for Williams games? Also, what is the situation for LED's? Any price breaks?
Mayfield should have what you need for flipper rebuilds and targets.
I don’t think they usually have “discounts” on LEDS, but you do avoid shipping.
Marco I don’t believe attends York.
Quoted from zacaj:Does anyone have space at their booth/etc to store a crated playfield until Saturday morning? Have one being delivered Friday but can't make it down...
I will have my 5x8 trailer with me that can be an option for you.
Laser Cue still available. Will be there both days and it will be on the floor.
I will be bringing a Laser Cue for sale or trade.
Asking $1150
Here are the details:
-Nearly perfect NOS back glass from Mayfair
-Custom full size pool ball shooter rod (original shooter also included)
-Brand new legs, leg bolts & levelers
-Brand new Rottendog Display driver board and all LED displays
-Comet brand blue & warm white LED's throughout entire machine
-Power supply re-capped
-40 pin connector male and female side brand new
-NVRAM installed
-new rubber kit installed
Bad:
-Shooter lane has wear
-Lower playfield has a little wear and a spot of planking
-1 of the 4 lights on the P-O-O-L roll over is sketchy and may need replaced
-Cabinet is a little rough
-Target 5 drop needs to be fixed (Coil burned up, which has been replaced, but I think the issue is with the IC2 chip which I’m planning on replacing at the show.
Quoted from NicoVolta:Was that 2001 for sale?
Yes. 700
284634D2-5FA2-43E8-A673-382384013678 (resized).jpeg5485ABFE-863E-4842-8258-B103286BE4D0 (resized).jpeg6350F530-D54C-4994-A63B-34FC8344DAFD (resized).jpeg6E04446F-382D-4F0D-A052-ACF7085C21BB (resized).jpeg7A738C1A-7BFF-411D-BE98-D1007A6B3A5F (resized).jpeg88A39E86-A219-497D-95DF-56652668EC95 (resized).jpeg9FC3D12A-2D33-4111-9380-EB36BA436CAD (resized).jpegAFC7D928-C03B-4265-8F0D-3C3CE2288D26 (resized).jpeg0AB9A943-D446-4782-BE0E-54B777E63D66 (resized).jpeg36D9C018-AFF8-4846-825F-C517376742E9 (resized).jpeg45AC435F-7D9E-4AE7-A859-2E31638586C0 (resized).jpeg57C97865-F1D0-4039-8D2C-3CE9BC794177 (resized).jpeg5C8AF4C4-7ECE-4BE9-91E8-C81D510B1985 (resized).jpeg78E3C204-DF33-4FD0-AF27-9295074EB962 (resized).jpeg9BB4EC4E-2113-4E9C-9C4E-3BDA866A830D (resized).jpegA63AD135-6193-475A-B6FA-DCB50968344F (resized).jpegAE7A512D-187A-4E1F-A832-5CFEBAAB07A0 (resized).jpegE301A511-5B82-4ACF-8FC5-4C60E0B1018D (resized).jpegF06E92B9-74EF-4E34-B2E9-0C8E9C82FC11 (resized).jpegFA40580E-9A2D-4E24-B9A1-003CE292BC9E (resized).jpeg171F7F9B-D2DC-4150-96BF-CC9A7ED4D7BA (resized).jpegCC9E747A-17C7-4FCD-8765-EA05030B7B55 (resized).jpegF90E34CC-08AE-4EF6-93D7-6F9EEB606538 (resized).jpegDF636ADA-E051-4E62-BBF8-6EE555FAAC84 (resized).jpegB79726AF-C811-4EC4-B77C-7BB83B404F95 (resized).jpegFD545041-9106-4E03-B104-60E154D99EC1 (resized).jpeg47C4F3EE-9ED4-435F-9BE9-C6534A2EB8A3 (resized).jpegF145A193-1404-4D26-B801-4F8E15497D4B (resized).jpeg8E924BF2-7463-4724-B22D-C5C04C3EE13B (resized).jpegCD22269E-99A0-480B-8871-8F5C70B80B22 (resized).jpegDFF8D6D8-14EF-45ED-9E8B-C3395E3FECDC (resized).jpegFD89EC68-6B00-4D64-A910-928532141B1B (resized).jpegSorry for the dupes. Corrected now.
4E12C3AB-1CB8-49DD-8022-FDF964CD387B (resized).jpeg1276F7C5-26DE-4713-9D59-507A51488AF5 (resized).jpeg42A01419-9616-4884-ADEE-115D8822DC0B (resized).jpeg8E0F5FBE-EF67-4801-A89F-5D8A33FF0307 (resized).jpeg76B76527-984C-4C95-A488-7E97569626EB (resized).jpegCFF20387-7B9F-443A-BDA2-EC0CDC6BE8AD (resized).jpeg6A59BC43-8A34-4E42-9E65-33E782D63A34 (resized).jpeg876B9419-DFB8-4751-879D-4D70071E3715 (resized).jpegB6E8DEB9-F1A2-459C-9F4A-570982C965E0 (resized).jpegD26FC592-E579-4481-A8A5-8DA6B314C943 (resized).jpeg39BBB603-CE1E-4445-B858-E0DCC7402857 (resized).jpegE3596C1B-3121-48FF-ACCF-8D48431F9887 (resized).jpeg55E1EDC7-8F55-4571-AE7F-EF4C28699D00 (resized).jpegB9B3E5DA-1469-4178-A21F-4B1AE7D8C5CD (resized).jpeg99A93B10-0E1D-4902-9A83-1F7BE72CF4D5 (resized).jpeg8F3F1335-617A-4C40-90AC-0E9F8F841D3A (resized).jpegB7D929EE-CFCF-482D-92C5-8A2DF766FA09 (resized).jpeg846688E6-3ADF-479C-B12B-D7BF54A27D26 (resized).jpeg1134E888-66A8-46A8-96BB-33E64762ADA3 (resized).jpegCD630BB5-42CF-44FA-851C-A2E48ECC0DBD (resized).jpeg130432E3-6D22-4C48-8351-1EA723442FC1 (resized).jpegB81D2BC7-B3CF-4731-998F-A96C9998093E (resized).jpegBF7A1678-45BC-4EEC-8BC0-4C765A4F7A43 (resized).jpeg7B7F8C21-5F18-43E3-8D61-A6E64D82BF51 (resized).jpegB752AB6C-F1F1-4126-AB5D-A354CF11CA98 (resized).jpeg04ADF497-530E-43CF-B496-A29DB414C4E1 (resized).jpeg20A9D405-08D1-4A70-9451-8482A8A98516 (resized).jpeg4B28E404-13B4-4867-B219-D56B508D0AC8 (resized).jpeg63323FED-B7AE-44A2-B2F4-C2026C32C6DA (resized).jpeg7A15B795-C52D-477C-86A0-5B5B7C2BE9D4 (resized).jpeg8C35A0C8-664A-4A93-A7C2-283A8E12EA21 (resized).jpeg90D49723-8BC3-48CC-9343-2E2FA8E7C2BB (resized).jpeg9FEFB646-5CEC-42B7-9308-B981899BB1B7 (resized).jpegE2527021-5FBC-4DAE-8D5D-57EB0F0A681B (resized).jpegEAF2DDA2-CF25-4270-9657-C90FE6FBC1BE (resized).jpegF519C145-A4EA-4791-AB4A-F5DB8E2BA0E8 (resized).jpegQuoted from Slogan1111:How much for the Capt. Fan? Does it work?
It works!
Quoted from NicoVolta:JR posted pics of the latter one. Cab is painted incorrectly, but PF and BG look nice. I have one and the museum does as well... so I shouldn't pounce.
Now if that Expo was for sale... yum. Also need a Stingray eventually.
I did snag that Freedom prototype. It's going in the museum after a full rebuild. Y'all come play it.
They have a Stingray for sale in the Free Play for $695. Pretty decent shape and plays 100%.
Quoted from mavantix:They must have moved? Where they used to be is a hot dog place now.
They moved 2 blocks down. They now sit next to Marcos pizza.
Quoted from fatality83:Thats a great game, played it yesterday and had a blast. Definitely have to add one of these to my collection sometime. Loved the fan and on a hot day it felt good.
If the person that brought the baywatch is on here, thanks for bringing it. It is a beautiful game and played awesome and they even added a color DMD at the show. Makes me really regret selling mine for $1,400 before the prices doubled on this machine . I need to find another. Thanks again for bringing your baby to the show. It really was in awesome shape.
He’s on here. freakmech
First show. First game. Jumped right in to help the hobby out.
PRICE DROP $1000
Also 100% working now. IC2 chip had to be replaced to fix the drop target.
For sale or trade.
Here are the details:
-Nearly perfect NOS back glass from Mayfair
-Custom full size pool ball shooter rod (original shooter also included)
-Brand new legs, leg bolts & levelers
-Brand new Rottendog Display driver board and all LED displays
-Comet brand blue & warm white LED's throughout entire machine
-All boards have been gone through, tested and repaired as needed.
-Power supply re-capped
-40 pin connector male and female side brand new
-NVRAM installed
-new rubber kit installed
Bad:
-Shooter lane has wear
-Lower playfield has a little wear and a spot of planking
-Cabinet is a little rough
-*****FIXED******. Target 5 drop needs to be fixed(replaced IC2 chip and target is now working)
Quoted from djreddog:PRICE DROP $1000
Also 100% working now. IC2 chip had to be replaced to fix the drop target.
For sale or trade.
Here are the details:
-Nearly perfect NOS back glass from Mayfair
-Custom full size pool ball shooter rod (original shooter also included)
-Brand new legs, leg bolts & levelers
-Brand new Rottendog Display driver board and all LED displays
-Comet brand blue & warm white LED's throughout entire machine
-All boards have been gone through, tested and repaired as needed.
-Power supply re-capped
-40 pin connector male and female side brand new
-NVRAM installed
-new rubber kit installed
Bad:
-Shooter lane has wear
-Lower playfield has a little wear and a spot of planking
-Cabinet is a little rough
-*****FIXED******. Target 5 drop needs to be fixed(replaced IC2 chip and target is now working)
Sold.
You're currently viewing posts by Pinsider djreddog.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/white-rose-gameroom-york-show-2019-buy-sell-trade-no-hotel-amp-food?tu=djreddog and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Magnolia, DE