Bally Strikes & Spares with NOS PF:
https://pinside.com/pinball/market/classifieds/ad/85926
$1350 delivered to the show on Friday. 100% working now except a couple pop bumper light sockets which can be replaced during PF swap.
Bally Strikes & Spares with NOS PF:
https://pinside.com/pinball/market/classifieds/ad/85926
$1350 delivered to the show on Friday. 100% working now except a couple pop bumper light sockets which can be replaced during PF swap.
WTB: Pin stadiums (up to $100)
WTB: Whirlwind SideBlades
WTB: Whitewater SideBlades
WTB: Wall-hangers/decorations for my basement arcade... let me know what you've got
WTB: Whirl-Wind Silicone Rubbers
Sold-Selling: NES Classic- $40
Sold-Selling: SNES Classic- $40
Selling: PS Classic- $20
Might also be interested in a standup Outrun.
I'll be there Saturday
Have a cool 1972 Midway Bullseye dart themed wall game. This 2 player wall mounted EM game alternates between dart players "Iggy" and "Hank". Game play sinsimialr to Ringer where you try to.hit the bullseye via timing the release of your dart.
Game has a clear in the back to.mount to a wall. Comes with schematics and a wall moutable midway coin box. Game is semi-working, starts and players but timing of the dart release isnt right somscoring isnt correct. First $300 or BO.
20191009_201548 (resized).jpg20191009_204719 (resized).jpgThis was going to be my winter restoration project but something else came up instead. So instead of letting it sit for a year I'll give someone else a chance at use it.
Beautiful F14 repro playfield from Germany with a full new plastics set. Retail cost of playfield with shipping from Germany and plastic set is $1100. I'll let it go for an even $1000.
20191009_210501 (resized).jpgPicked up a Vegas this past week, and I’m not attached to it, happy to take a trade/cash offer if anyone’s interested, players condition with wear on playfield and cabinet...plays great!....I’ll be up in York on Friday.
2AC7A69D-2FE9-4A60-9B9A-AD44E0BCCD3B (resized).jpeg75661B52-A3F7-4151-B052-9C2E0B8ACAAD (resized).jpegBringing a players condition Williams Flash for sale in the free play area for 700. Cleaned and waxed with new rubbers. Has NVRAM, repaired driver board. Trades +/-cash also considered.
Bringing the
Williams Hollywood Driving Range shopped out an working.. for free play.. an sale
Bally Bullfight shopped out an working free play an for sale.
Project Gottlieb pinball... For sale
Stack of about 50 NOS translates. $20 to $125 each depending on what it is..
Boxes of misc items...
Quoted from wolverinetuner:I’m planning to bring a Team One on Saturday for sale in the freeplay area.
PM sent
Quoted from 1stpinballdave:Looking good Donny!
It's 11:45 and she's officially ready for the show...
man, very pumped to see all my pin buds, and hey, so far it looks like nice weather.
Here's one last pic before I break her down:
FINISHED (resized).JPGBringing the following to the show for sale. Come see me at my booth inside:
Elektra: gorgeous, mostly working 1800 (this may be sold before I head up)
Space shuttle: decent working project 1200 (sale pending)
City Slicker: boots and plays, good displays, good cosmetics except head is damaged where it mounts to lower cab. 1100
Aztec: works, needs shopped/rubber 600
Super straight (sonic): great cosmetics, working condition unknown. 550
Xenon: working, has pf wear, needs shopped 1400
Road Kings: working, needs shopped 1200
Cyclone: beautiful shape working 2200
Multicade cocktail $750
Tons of video and pin parts starting at $1
Excited to attend my 18th York show as a vendor. I missed one year when I had open heart surgery. Glad rich and crew keep it going!
Mike
So this is my first show, my first time transporting a game to a show, and first time entering a tournament. Lots of firsts from the first state. Im really nervous about loading this machine into my truck by myself. Anyone passing through Delaware around 7:30-8:00am Friday and willing to help, let me know. Lol
1F01A0E9-A807-4AD8-89AB-F702A53673EB (resized).jpegQuoted from cmack750:Have 2 machines that are finally on the chopping block to make space. Unfortunately, I can only bring one of them, and only if pre-sold since I am bringing back another machine. Will be there Friday only. Will work to get ads up by tomorrow, but reach out if interested before that and I can try to get pictures.
Williams Scorpion (Widebody): $1000. You don't see this one come up too often. Fully working. Some playfield wear/touchups. Backglass has been touched up on the backside (not by me) but presents well. Full topside teardown, cleaned/shopped. All displays work. Drop Target Decals are like-new. All coil sleeves (and some coils) replaced in the recent past and all solonoids/flippers are strong. Bridge recifiers have been replaced and fused for bulletproofing. 1 or two bad bayonets in the backbox but all other lights work and all inserts and playfield GI have been upgraded to comet LEDs.
Terminator 2: $2350. It's with a heavy heart I let this one go, since it was my first machine and is always the friend-favorite...but time to make room. Players condition with some wear and touchups to the playfield. Skull kickout hole had major wear but has been repaired and covered with a cliffy (and you can't see it anyway). Cliffys installed in shooter lane, database hole and skull (also have the 4th cliffy for the kickout above the pops that I just haven't installed). Some broken plastics but nothing in the lower playfield and full plastic protector set has been installed to prevent any further issues. New motorcycle ramp (will include chipped ramp that I replaced, since the piece broken doesn't affect play). Very tastefully modded: Mirror blades, lighted LED Ramp signs, nice LED Pops, LED Light strip under hunter-killer ship, Terminator with led eyes that flash when you need to hit the motorcycle ramp, lighted database hole, custom apron cards. Full non-ghosting LEDs installed in inserts, and playfield GI and all flasher have been upgraded to LEDs as well. Fully shopped within the last year or so and rarely played since.
T2 ad is finally up as well. Can bring to York on Friday if pre-sold.
Quoted from freakmech:So this is my first show, my first time transporting a game to a show, and first time entering a tournament. Lots of firsts from the first state. Im really nervous about loading this machine into my truck by myself. Anyone passing through Delaware around 7:30-8:00am Friday and willing to help, let me know. Lol[quoted image]
Why not load it by yourself for the 1st time.
Space Invader project at show $1,000 plastics, drop targets, spinner decals, PB cap, apron
https://www.flickr.com/photos/ballypinbaltimore/albums/72157670893145584
I'll be looking for a Mario Brothers (pin) or Starship Troopers. I should have cash in hand at the show, going to be there Friday only.
Unless I can make absolute magic happen tonight after work, prototype Freedom is not making it to freeplay.
Quoted from freakmech:There is a bag of dicks, start eating. It’s all you.
Please no hotel or food discussion on this thread.
Quoted from DorkInAbox:I'll be looking for a Mario Brothers (pin) or Starship Troopers. Cash in hand, going to be there Friday only.
A friend of mine has a Starship Troopers for sale that I could pick up from him today and bring tomorrow for you. $2400 and I’ll need a deposit sent via PayPal since he’s an hour away and don’t want to get stuck bringing it back with me, because then I have no room for anything I buy.
It had a full tear down shop 6months ago (needed for Segas to replace GI bulbs). LED in GI and inserts. Wear spot in front of hole is covered with Mylar. Buttons covers will hide the flipper button cabinet wear.
If interested message me by early this afternoon so I can go get it and load it up for tomorrow.
1465C32B-17F5-41F7-9AB4-10CDA3400BF1 (resized).jpeg2FC9D2D1-B683-40AD-B26F-CC1E27EA9B6E (resized).jpeg38949F85-A571-45F7-B99E-35F731BF5D65 (resized).jpeg6698082D-6F96-401C-9415-8ED3F7BEA961 (resized).jpeg8821DA8A-0AAD-4462-87F0-9DE846210403 (resized).jpegE126DA0C-5C66-480F-9955-3BAB9DEA9300 (resized).jpegAnyone have a Bally KISS for sale in good condition? Just bought a Bally Freedom and Sonic Super Straight last night and all the guy would really like is a Kiss pinball machine. So I’d love to make it happen for him!
Finished my two pinball lifters so will have one for sale pick up at the show. $100 even.
CA57D984-E5AC-481B-B0F6-697BF8E0D197 (resized).jpeg Added over 4 years ago:Now sold. (At the show)
Last minute stuff I can bring to York:
Williams Round Stand-Up targets. $4 each. Working.
Rear mount:. Orange(3), White(1)
Front Mount:. Red(3), Orange(1), White(1)
Cliffy Ramp Protectors for T2 Motorcycle Ramp (Brand New): $28. Same price as buying from Cliff but no shipping and no need to wait months (hes a busy guy!)
Original Artificial Intelligence Lab sign for T2 Ramp. Clean with riveted brackets:. $8Sold
Dr Who Topper Backbox Decal. New. $5
Custom Red Heartwood Gun Grips for the Shadow from Arts Arcade. New and no longer made. $50Sold pending pickup at the show.
IMG_20191010_121752881 (resized).jpgIMG_20191010_121802464 (resized).jpgIMG_20191010_121839057 (resized).jpgIMG_20191010_121853578 (resized).jpgIMG_20191010_121907214 (resized).jpg
York Show Special, The following 4 games delivered to York for $600:
1939 Bally Pick-Em
Quoted from nocreditdot:My apologies if I missed a post about this. Anyone selling playfield glass?
Thanks
I asked a few times, never got a reply.
Anyone heading to York beware of mess on 83 at Market Street exits. Look like it's blocked in both directions.
Quoted from nocreditdot:My apologies if I missed a post about this. Anyone selling playfield glass?
Thanks
Quoted from gdonovan:I asked a few times, never got a reply.
Sometimes Jeff from classiccades brings glass. But last time they had the stamp in them.
Quoted from billsgto:I have a used Firepower backglass for $40 I can bring on Friday if anyone is looking for one.[quoted image]
Aw man, I really need. Anyone in York on Friday that's coming back to Raleigh area?
Bump for anyone bringing a pinbot to the show that wants to beta test some new tournament roms. I'll have them with me free to owner of game in exchange for testing it out.
Quoted from daly124:What time can you set up machines tonight before they close?
Now till 8pm.
Quoted from robertmee:Aw man, I really need. Anyone in York on Friday that's coming back to Raleigh area?
I am planning on going to York. Send me a message bud.
I'm lowering the price on my ST:TNG assorted parts including Neutral zone target to $5 for the show. I'll be there Saturday.
Quoted from Guidotorpedo:Bringing the following to the show for sale. Come see me at my booth inside:
Elektra: gorgeous, mostly working 1800 (this may be sold before I head up)
Space shuttle: decent working project 1200 (sale pending)
City Slicker: boots and plays, good displays, good cosmetics except head is damaged where it mounts to lower cab. 1100
Aztec: works, needs shopped/rubber 600
Super straight (sonic): great cosmetics, working condition unknown. 550
Xenon: working, has pf wear, needs shopped 1400
Road Kings: working, needs shopped 1200
Cyclone: beautiful shape working 2200
Multicade cocktail $750
Tons of video and pin parts starting at $1
Excited to attend my 18th York show as a vendor. I missed one year when I had open heart surgery. Glad rich and crew keep it going!
Mike
See you there Mike!
I have a new set of white mountains for White Water i can bring if anyone is interested, still in the package.
Quoted from arcademojo:Finished my two pinball lifters so will have one for sale pick up at the show. $100 even.[quoted image]
Yikes. That’s some expensive plywood. It cost me $30 for my jack to build mine
Looking forward to the progress of set up if anyone can post some pictures! Can't wait to go to the show tomorrow!
Quoted from Murphdom:Yikes. That’s some expensive plywood. It cost me $30 for my jack to build mine
I’m sure it cost more with that big scissor jack and handle.How much is your back worth?
Anyone coming from southern NJ I could pay to pick up a machine and deliver to the show? Send me a PM...
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/white-rose-gameroom-york-show-2019-buy-sell-trade-no-hotel-amp-food/page/17?hl=pmedic871 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.