Hi my name is Harold Burgess Jr. I am trying to fix my Whirlwind Pinball. I got it broken, but I have been able to get it working after replacing the resistors on the power board the 39k 1w resistors. Now a few weeks ago my whole lower display stopped working. The top 16 digit display works ok just all the lower 16 digits is blank. I am not sure what would cause the lower display to stop working.. The part number is D-12232-1. I have the schematic for the display, but I am self taught learning to trouble shoot and building circuits. Can you point me to the most likely bad chip or something that would cause that issue. The machine is a system 11B Williams Whirlwind. The schematic for the master display is 16-9033. I checked the resistors on the power board they read perfect. The glow on the lower display is from the camera. I just do not have 250$ for a new display, It would be nice to play 4 players not 2. Thank you for your time. Have a grate day!!!