On my whirlwind my left flipper recently stopped working and I can't figure out why. No issues with other solenoids or the right flipper. The flippers were rebuilt 6-8 months ago.

Here is what I have done so far.
-I tested the cabinet switch in the switch edge test and that is working.
-checked fuses on the Aux driver board and those are good. I believe it's F5 or F6(both tested fine)
-getting 24v power to each of the 3 lugs on the coil.
What else should I be testing here as I am a little stumped as to what to check next?
Thanks guys.

Yes if I manually hold the flipper up then hit the button it stays up.

Turned out I needed to file the EOS as the connection wasn't that good.

Works perfectly now. Thanks for the help @mgraves