Whirlwind
Williams, 1990You're currently viewing posts by Pinsider lee.
Click here to go back to viewing the entire thread.
Quoted from Ronnie1114:Do you have any idea on the bonus multiplier lights?
Quoted from joe2012:take another couple pics of multiplier board.it looks like the socket and bulb are in backwards.
joe 2012 already stated that all of your bulbs are installed on the wrong side of the board. Start there.
Chances are that you may have cracked solder joints on the male pins where they are soldered to the board. Quite a common problem on this type of board. Look closely at that area for hairline cracks and reflow with new solder - preferably after removing old solder.
Other than that, follow wxforecaster instructions for looking for a broken wire upstream.
You're currently viewing posts by Pinsider lee.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/whirlwind-help-1?tu=lee and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Bakersfield, CA