Northampton, MA
My guess is if you unplug J14 you will lose the lighting you have. It seems like the entire line that is associated with J7 is down. Can you snap a pic of what you have at J7 on your interconnect?
(Topic ID: 221657)
You're currently viewing posts by Pinsider nerdygrrl.
Click here to go back to viewing the entire thread.
Do you see that connector to the right yellow wires with white traces, how does that connector look? Is it burned at all?
You can also use page 98 in the manual to verify that you have the correct connectors plugged in. It will give you the connector location and where it goes to for each board.
https://www.arcade-museum.com/manuals-pinball/W/Whirlwind_OPS.pdf
Quoted from RGAires:the J6 right?
Correct.
I am on the road today and unfortunately I can only go by that manual which is giving me diff info. Maybe someone more familiar with the machine can come on and chime in.
This is why that lamp matrix table is so important as it tells you how and if the lamp are connected and what pins/connectors they correspond to.
You're currently viewing posts by Pinsider nerdygrrl.
Click here to go back to viewing the entire thread.
Reply
Wanna join the discussion? Please sign in to reply to this topic.
Hey there! Welcome to Pinside!
Donate to PinsideGreat to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
