Got my 2nd Whirlwind after I sold my first unit 17yrs ago. Read all 81 pages !! and found great tips and input, thank you all !
Have 2 lights not working at the moment. Right Red flasher (near SE arrow). Noticed there is a cable with a plug on it which is not connected. Can't see any location to connect to. Anyone has an idea?

I also find 3 other cables flying around as you can see on the pic... The orange one is going to the red middle light in the Kompas (not working) and thought connecting the 2 orange ones would fix it. Did not.

The black one, no idea...

plug flasher (resized).jpg

I followed the 3 cables :
Orange 1 to kompass center (RED circle - never works)
Orange 2 to yellow '100K bonus per sweep' in front of targets (occassionally blinks together with the 100K when LIT target )
BLack cable : untraceable.

I noticed on the yellow 100K per sweep there is a second orange cable and a black cable connected.

Do you think it's possible I should connect the oranges together and to the oraange one of the flasher and the black to the black cable of the flasher ?

Okay okay, won't play around and blow up things, far too precious !!

I found out it's solenoid 01C (bottom right Fl) and 08C (million/compass Fl). Hereby the schemes from the manual.
But for me it's chinese... anyone willing to advice if manua sheets are useful?

sch1 (resized).jpg

sch2 (resized).jpg

going back to my post on page 81

Can anyone tell me where

1) the 2 wires of the red bottom right flasher are normally connected to ?

2) Same for the 2 orange wires from yellow bonus per sweep flasher. 2 cables (ORN - BLK/BRN) are connected on both ends. One ORN isn't (only connected on flasher).

3) Same for the orange wire of the middle (red) flasher of the compass.

4) One BLK/BRN cable is loose (might be needed for RED right flasher ?)

Thx

Case solved & closed. Connected all ORN together and BLK together. That simple....