Been a whirlwind owner for a year now, just ran into my first real problem. Maybe someone can point me in the right direction.

During startup I get the press advance for report.
once i do this I get switch 27, switch 28, switch 29 on
I tried playing to see what was on and the following occurred:
right hand slingshot stays on, coil gets real hot then blows Fuse F4 on Aux power driver board
also while this happens 3 bank drop target won't reset.
I checked the contacts on the sling shot and the aren't touching.

my thought is replace the coil ae-26-1500 or possible problem with the 3 bank target opto board C-13205-1

Any positive feedback would be appreciated.

Great Game
Truly Addicted

Thanks very helpful
I will check on the wiring again and see if there are any bad/loose connections. In the meantime I will order some replacement coils and transistors. I did notice a little browning on the front of the CPU board at Q63 transistor. I will look here first if and when it comes to taking off the cpu.

So, i've been working thru a few problems on my machine and came across this green wire that has come off. I'm also having an error with the ramp lifting mechanism. Any ideas where this green wire attaches to. i'm thinking to this coil but just want to double check.
thanks

IMG_0952 (resized).JPG

so when i took a closer look, it came off a standup target by the ramp. Soldered it and the ramp is moving up and down again. Hadn't played in months but managed a respectable score on my second game.

IMG_0953 (resized).JPG