I did this to mine as well. This is an older video, as I have since replaced the original Warm LEDs with two Balrog CW Flashers so the higher voltage from the fan doesn't burn up the LEDs.
You're currently viewing posts by Pinsider capper96.
Click here to go back to viewing the entire thread.
I did this to mine as well. This is an older video, as I have since replaced the original Warm LEDs with two Balrog CW Flashers so the higher voltage from the fan doesn't burn up the LEDs.
Quoted from mcluvin:I'd like to see the fan and clouds light up in sync with the lightning effect on the playfield and backglass. I think somebody has already done it though.
Chris
Like the one in my video? You just wire some sockets to the lightning board.
Quoted from ZEN:Did you just use some led flashers in there or 44s? No strain on the circuit? Just curious as I was going to do the same to mine.. looks killer..
Both, the setup kinda looks like PinWillie's pictures above, but here is my current configuration
2x Warm White LEDs each attached to a GI rear lamp (might switch to UV)
2x CT "Balrog" Flasher 44 bulbs attached to the fan motor (higher voltage LEDs)
1x CT 9 stack Coolwhite 906 flasher on first lightning lamp
1x CT 9 stack Orange 906 flasher on second lightning lamp
1x CT 9 stack Coolwhite 906 Flasher on third lightning lamp
1x CT 9 stack Red 906 Flasher on the High Pressure flasher insert
1x CT 9 stack Blue 906 Flasher on the Low pressure flasher insert
The only issue I had was the fan frying LEDs after a while, but the Balrog higher voltage flashers seemed to solve this problem that i had.
You're currently viewing posts by Pinsider capper96.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/whirlwind-blower-light-mod-interest?tu=capper96 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.