Anyone here knows where i can found this part?
It has a number 30C-466-9
https://www.ipdb.org/images/119/image-12.jpg
20191122_110740 (resized).jpgAnyone here knows where i can found this part?
It has a number 30C-466-9
https://www.ipdb.org/images/119/image-12.jpg
20191122_110740 (resized).jpgTruthfully, since it doesn't have any artwork that would need to be reproduced, that would be pretty easy to make yourself.
Quoted from drsfmd:Truthfully, since it doesn't have any artwork that would need to be reproduced, that would be pretty easy to make yourself.
Yeah, what drsfmd said. I've made these before. Just be sure to use PETG or Lexan (polycarbonate). Acrylic won't hold up.
Here are a few pictures of a clear plastic I recreated recently for an Atlantis where the tip broke off the original plastic. I didn't get a good picture of the plastic after I cleaned up the shape. Between the two rough pictures and the finished product I used a drum sander attachment to my drill gun to get the shape down to the proper outline. Then I sanded the edges of it with ever finer sandpaper. If you want to go to town you can use Novus or Mothers Mag Polish to really clean up the edges of this clear plastic.
IMG_9355 (resized).JPGIMG_9356 (resized).JPGIMG_9397 (resized).JPGOn a side note of plastics. I took a set and soaked them in hydrogen peroxide the last few days with a $15 UV bulb over them and they are now nice and clear
Quoted from AdamH:I just got a laser cutter. I'll likely be making some. I just need to figure out the posts.
What did you end up doing about the posts? I've laser-cut the plastic. I could share the file if you still need it.
That's nice to offer.
On the Aztec you might as well make 20 of them damn things. One good ball smack and it will crack again.
Anyone found a fix for this other than keep replacing it?
Quoted from edednedy:Yeah, what drsfmd said. I've made these before. Just be sure to use PETG or Lexan (polycarbonate). Acrylic won't hold up.
As mentioned here above, if you make it out of polycarbonate, you shouldn’t have anymore future problems. I made the mistake of making mind from acrylic the first time, shattered after about 1 month. The polycarbonate has lasted years.
Quoted from RC_like_the_cola:Found this on ebay.
ebay.com link: itm
Standoffs included.
Thank you! Just picked up one myself.
Quoted from Garrett:Thank you! Just picked up one myself.
Sweet. The Aztec I just picked up seems to have that one already replaced and the broken original was in the coinbox. Still need a right hand sling plastic for mine.
Anyone know if this company is reputable?
https://sos-pinball.com/en/760-decors-flipper-aztec-plastic-pinball.html
Quoted from RC_like_the_cola:Sweet. The Aztec I just picked up seems to have that one already replaced and the broken original was in the coinbox. Still need a right hand sling plastic for mine.
Anyone know if this company is reputable?
https://sos-pinball.com/en/760-decors-flipper-aztec-plastic-pinball.html
Are they out of Canada? Has the .com extension. I wouldn't mind a set of those myself.
Quoted from Garrett:Are they out of Canada? Has the .com extension. I wouldn't mind a set of those myself.
France, it seems.
If you get a set and have an intact right sling, I'd buy it.
Garrett RC_like_the_cola
Would you be able to tell/show me where this plastic goes? I am stumped!
Quoted from RC_like_the_cola:Sweet. The Aztec I just picked up seems to have that one already replaced and the broken original was in the coinbox. Still need a right hand sling plastic for mine.
Anyone know if this company is reputable?
https://sos-pinball.com/en/760-decors-flipper-aztec-plastic-pinball.html
Quoted from RC_like_the_cola:France, it seems.
If you get a set and have an intact right sling, I'd buy it.
I need the left sling for mine
I contacted them to see if they take paypal
Quoted from sandman74:Garrett RC_like_the_cola
Would you be able to tell/show me where this plastic goes? I am stumped!
[quoted image]
Isn’t it the left side guide of the spinner lane?
Quoted from TreyBo69:Isn’t it the left side guide of the spinner lane?
Yes, it goes under the plastic with art on it. Mine seems original, but ebay also has that one, so I'm guessing it is a common break point, as well.
Quoted from TreyBo69:Isn’t it the left side guide of the spinner lane?
sandman74 , yup Treybo69 is correct.
I was working on playfield touch up on mine last night. I thought I had replaced the playfield plastics but that was not the case. Surprised no one ever made a run of reproductions for this game.
Quoted from Liftserv:I need the left sling for mine
I contacted them to see if they take paypal
Can you let me know how that works out. I'm just afraid the shipping cost could make it a pricey venture.
Quoted from Garrett:Can you let me know how that works out. I'm just afraid the shipping cost could make it a pricey venture.
I found a post by SOS saying they do worldwide for 8 euros, so not bad. I always prefer original, so if anyone wants to sell me their right sling, I'll pay half what you have to pay for the new ones.
Quoted from RC_like_the_cola:I found a post by SOS saying they do worldwide for 8 euros, so not bad. I always prefer original, so if anyone wants to sell me their right sling, I'll pay half what you have to pay for the new ones.
That's not bad at all.
My plastics with graphics are only slightly warped with no cracking yet. If I can't get an entire replacement set then I won't make the change until needed.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/where-can-i-find-this-clear-plastic-williams-aztec?hl=sandman74 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.