Just listed a HUO SWE1 Special Edition:
https://pinside.com/pinball/forum/topic/fs-in-md-swe1-special-edition-huo-3500-obo
Mike
You're currently viewing posts by Pinsider Guidotorpedo.
Click here to go back to viewing the entire thread.
Just listed a HUO SWE1 Special Edition:
https://pinside.com/pinball/forum/topic/fs-in-md-swe1-special-edition-huo-3500-obo
Mike
I have a FT that is decent with a few mods (coin taker led, inner side decals, etc), and a ton of new parts (display, lightning flippers, couple plastics, etc). It is about 95% complete, needs legs, backglass glass, one plastic, balls, and casters club metal hood.
Considering selling a decent, off route WCS. Might shop it though. Not sure what I want to do with it. It boots and plays well. Needs a shop out. Header and under ramp plastic cracked. Needs a new battery holder. Needs GI plugs repaired. Needs a new display. Probably 1900 if I sell it like this, or 2000 with a working display. Baltimore.
Quoted from westofrome:Make Crabtowne an offer, we need room for more new games in there...
Sorry guys.... as much as I hate bk2k, crabtowne is not getting rid of it, or certain other games. Too many people make the restaurant a destination point because that (and a few other key games) are there.
We are getting newer pins in there.... SW pro, kiss pro, and gb pro are there already. We will be making the lineup in there newer before 2019, without harming the integrity of crabtownes “time capsule” image.
If you haven’t been there in a year or so, check it out.... 31 pins, most with Titan silicone and comet smd in the GI. My partner in crime Shannon has capped over 30 monitors, including all the Nintendo’s.
This isn’t your daddy’s crabtowne any more
Mike
Selling a twilight zone
Home used since 2002. Clean working machine with the following done to it then:
New entropy door
Ipb plastic kit installed 2002
All 4 flippers rebuilt top to bottom
New clock board
New clock case
New powerball
Dmd hvp board
Mods include Robby the robot, piano, camera, rocket, backboard decal, gumballs
Great playfield plays great. Cabinet faded and scratched but price includes new cabinet decals.
$6500
I have a millionaire project that I really want to move along. 650 or best offer. It’s in marketplace if you want to see some pics.
Mike
I have a Batman dark knight for sale. Pics and description in marketplace. Pretty much stock. Has like 1300 plays on it. Looking for reasonable offers.
Mike
Currently for sale in Baltimore:
Rollergames with early dp playfield $2300
Creature 4900
Tommy semi project 3400
Iron man needs shopped, lots of mods 4600
Police force gorgeous lots of mods 1800
Black knight L.E. fair shape works needs shopped 1600
Mike
Looking to trade a twister. Works but needs shopped. Currently on route. Has working topped and working magnet/disc with new revision magnet driver board and pic chip. Can add a little cash but looking to go even up for one of the following:
Bay watch
Frankenstein
South Park
Jurassic de
Last action hero
Royal rumble
Getaway
Black rose
Judge dredd
Demo man
Flintstones
Indy 500
Austin powers
Monopoly
NASCAR
X-Men
Super mario GTB
Selling or trading my metallica pro led in MD (game currently in silver spring)
https://pinside.com/pinball/forum/topic/for-sale-metallica-pro-155
Just picked up a Hurricane from a home Domestic game was in home use for over 20 years. Lower cab is faded but playfield is nice. Has a little battery schmutz on the cpu board but it looks repairable/cleanable. Game works once you get through the factory settings screen. 2200. North of Baltimore.
Mike
Got a really nice Williams contact, fully working, regularly serviced while it was in a home.
$1400 obo, northern Baltimore county
3 pins are in this months jaybird auction in Frederick md, which ends this Thursday December 8:
Williams contact: works 100%, cab has some bumps and bruises, nice pf and bg, game was in a home most of its life and was well maintained by coinopdoc
Williams f14: game boots and plays, clean mpu. Average playfield. Cabinet has water damage and would probably need replaced.
Williams road kings: beautiful machine, plays 100%. Game had a full topside tear down with Titan silicone rings and Comet led in the gi and feature. Nice all around.
Link to auction:
https://www.jaybirdauctions.com/
Quoted from Skyemont:Anyone w/ a Pole Position for sale? PM me!
I have a non working pp2 with a bad monitor and boards needing work for 250.
Quoted from curban:Anyone know if that Mando pro in MD that’s been sitting in FB marketplace for 2+weeks at $5500 is a scam, an old ad, has issues, or is just not that desirable a title? Seems like decent price also considering the mods/upgrades. Feel free to send me a mail if you know or have opinion on it so not to clutter up this thread. Thanks.
Also let me know if I’m not supposed to make a post like this and I will delete.
It’s all the way down in the lower peninsula of Md…. Like 3 hours from Baltimore. I’d venture a guess that it’s still available.
Last chance for my foo pro this week, otherwise I’m putting it back on route the following week. 6400 firm cash or trade (see trade list in ad)
2 EM wedgehead projects fs in Md. 600 each or take both for 1000
Quoted from Guidotorpedo:Really nice Waterworld for sale near Baltimore.
Machine - For Sale
Waterworld
Fully shopped/refurbished - “Beautiful Waterworld for sale. Shopped, leds, new rubber. A decal was made to cover the common flipper wear area and it looks great, like factory. Beautiful, cheap machine! Cas...”
3 days ago
Balt, MD
Guidotorpedo
2,500
Mark sale pending
Add Promos
Edit ad listing
End ad listing
Better pics now in the ad
You're currently viewing posts by Pinsider Guidotorpedo.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/whats-fs-in-maryland-right-now-maryland-fs-thread?tu=Guidotorpedo and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.