Star Wars cockpit for sale!
Absolutely gorgeous example of this holy grail game.
PROS:
-(2) complete cockpits were used to make this (1) example. The other game was sold off as a parts game. Thus, the best parts from both games were combined to make this! See my restore blog right here on Pinside at: https://pinside.com/pinball/forum/topic/1984-atari-star-wars-cockpit-restore
-Yes, it has the 25” Ampliphone monitor AND I’m also throwing in an extra 25” compatible tube!!! These are rare like hen’s teeth, but I managed to find 1 that I will include (though you certainly don’t need it).
-Brand new reproduction plexiglass canopy set from ThisOldGame.com.
-Brand new reproduction control panel overlay from ThisOldGame.com.
-The artwork has been meticulously gone over and fixed up where necessary (for example: all the black trim around the edges was repainted black). Though there may be a few knicks here and there, the artwork looks extremely good!
-The lighted marquee in the back is gorgeous. No flaking and colorful. Only a very small sliver missing from where the marquee rubs against the wood that really can only be seen when the marquee is removed.
-Coin door is gorgeous. For that matter, all metal pieces have been repainted black (even the screws!)
-Flight yoke is a smooth, consistent black and not worn down. All parts for controller have been cleaned and re-greased
-Includes a brand new reproduction monitor bezel with the reflective strips (again, something that is impossible to find)
-Boards have been meticulously gone over. Sound boards were sent out and bulletproofed, Ampliphone video boards were sent out and bulletproofed
-Power supply has been fully re-capped
-Brand new vector generator on the graphics board!
-Many new pieces (power cord, floor mat, bezel, etc…)
CONS:
-The tube has a small dime-sized burn in the center. This does not affect gameplay and can only be seen during certain scenes as most of the game is a black starfield! This burn happened prior to my taking ownership and certainly occurred due to the “spot killer” not functioning properly. This however has been fixed and is properly working. Again, I’m also including another 25” compatible tube should you desire to ever replace the original tube (you’d need to swap the yoke and whatnot).
-While all of the cabinet is there and artwork has been touched up, it isn’t a perfect cab. There are a few cosmetic cracks you can see if you look closely. Not a big deal, but just sharing as much as possible.
-While the triggers on the controller work flawlessly, the thumb buttons currently only work every now and again. Doesn’t affect gameplay as all the buttons do the exact same thing (shoot), and honestly this shouldn’t be difficult to fix. It never bothered me enough to mess with it.
-It’s in my basement. I’ll provide ice cold beverages of your choice (beer, soda, water), but you’re going to need to bring a buddy with you to get it out of the basement cause she ain’t light or small!
Please feel free to PM me with any questions. $5200
3b550a8f40851b8421ae42c623f7950327fd6db5_(resized).jpg
1aedcb48e4c93f608a1b0506a5e978e7c6e46ff7_(resized).jpeg
69f58f4153fb877a9cfa5085a4ee61d5a1e2de38_(resized).jpg
extra_SW_monitor_(resized).jpg
854e50dc187367d10885225a3112237209e73405.jpeg_(resized).jpg
FullSizeRender_3_(resized).jpg
FullSizeRender_2_(resized).jpg
FullSizeRender_4_(resized).jpg
FullSizeRender_1_(resized).jpg
FullSizeRender_6_(resized).jpg
FullSizeRender_5_(resized).jpg
FullSizeRender_8_(resized).jpg
FullSizeRender_(resized).jpg
FullSizeRender_9_(resized).jpg
FullSizeRender_7_(resized).jpg
IMG_5359_(resized).JPG
IMG_5366_(resized).JPG
Toledo, OH
that's a beer pong table all day.
