This is a question i get asked quite a bit and figure there must be more out there who repair, restore or tinker with Pins.
So lets see what others are working on today in the shop or kitchen table for all i care.
You're currently viewing posts by Pinsider Stretch7.
Click here to go back to viewing the entire thread.
This is a question i get asked quite a bit and figure there must be more out there who repair, restore or tinker with Pins.
So lets see what others are working on today in the shop or kitchen table for all i care.
Quoted from snyper2099:This post sounded so familiar...
I did a search before i created this one and nothing came up.
Quoted from Phat_Jay:Getting alien poker ready
One of my favorite games. I have one coming down the pipeline as well.
Quoted from Aeolus7:I couldn't remember the order of the springs, washer, clips, so it took me a couple tries...
Been there before on my Metallica drops ...very frustating
Quoted from transprtr4u:Getting the junk out of the Junk Yard
Gotta love getting ridding of junk.... looking good rob
Quoted from Darcy:Fixed the right flipper on my 'Hi Dolly
Still need to play this game one day.
To believe the first one is fishtales that’s going to get rad-cals after that I have no idea lol.
If all goes well tomorrow I’m going to do decals on bsd and afm.
They are not mine they were supplied by the customer. I can check with him if you like?
The decals are not originals though they are different artwork.
if you check back in this thread this evening i should have some pictures up of them.
Quoted from LTG:Put a bill validator on JJP Pirates and Stern AC/DC Luci Vault.
Tomorrow install bill validators on MMR, AFMR, MBR.
Sounds like fun
Quoted from transprtr4u:'m curious on the fish tales Rad decals ,could you give me your opinion on these as I just picked up one up as well
Yes I will
Should be doing it in next week or 2
Yes been a while since update but afm is pretty much done as well as time machine. Did bunch of repairs on other pins today. Hoping to start back on bsd tomorrow but still waiting on powdercoat.
Rad-Cals come in tomorrow along with mirror chrome trim for t2. Next week I should have eatpm playfield show up as well so going to be busy in weeks to come.
I’ll update with some photos tomorrow.
Time machine is pretty much done, just waiting on some dome covers to come in. I really like how the blue powder on the ramp looks.
Well the Rad-cals have come in for fish tales ....alot thicker than what i thought they would be. Looking forward to installing these.
AFM is pretty much done now, i think the effects looks great and the black powder ties it all in, just need to finish up speaker light kit.
My goal today is to get BSD cab done as far as i can go without the powder parts as
well as playfield back in cabinet.
I really have to try new rails one day. The laminated stuff usually always has peeling.
I’m assuming your doing a hard top on fire power or you going for a natural look.
Elvira cab is back together.
T2 decals are on
Started Fish tales head with Rad-cals. I was hoping for a better fit as they are about 1/4" to narrow so i just kept it tight to the fron of the head.
Just waiting for stuff to get powdercoated so i can get rails on fishtales then do the cab Rad-cals. We see how that goes.
Got some trim and head on T2.
Did my first Rad-cal install on a fish tales. Have to say it went pretty good and cab fit was nice just the head was a little shy on the sides.
They go on quick i would say 3-4 times faster than decals but you should have 2 people for these. As for cutting out the holes went really quick too, i used a cordless drywall router with a guide point bit and poked hole from inside cabinet as a marker and cut from the front side with router. The protective layer hasnt been peeled yet in pictures so may look scratchy.
IMG_3199 (resized).jpgIMG_3200 (resized).jpgIMG_3201 (resized).jpgIMG_3202 (resized).jpgIMG_3203 (resized).jpgIMG_3204 (resized).jpgIMG_3205 (resized).jpgIMG_3206 (resized).jpgIMG_3207 (resized).jpgIMG_3208 (resized).jpgIMG_3209 (resized).jpg
Elvira done and plays great..I really think the powder on the speaker panel ties it all together.
I decided to go with a 2 tone for me fish reel and get a couple words added for fun.
Today ill be back working on T2 and hopefully some pics soon.
and a little bit of a connecter issue to fix.
IMG_3256 (resized).jpgIMG_3257 (resized).jpgIMG_3250 (resized).jpgIMG_2562 (resized).jpgIMG_2563 (resized).jpgIMG_3253 (resized).jpgQuoted from chuckwurt:Mobile streaming rig built!
Just had good friend fabricate and powder one for yegpin tournament.
Made top arm longer for light support and 6 pockets for battery holders
Quoted from Skypilot:Highspeed Hardtop prototype! Coming soon
Good to see
These hard tops are the next best thing to new playfields
You're currently viewing posts by Pinsider Stretch7.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/what-you-working-on-today?tu=Stretch7 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.