This is a question i get asked quite a bit and figure there must be more out there who repair, restore or tinker with Pins.
So lets see what others are working on today in the shop or kitchen table for all i care.
This is a question i get asked quite a bit and figure there must be more out there who repair, restore or tinker with Pins.
So lets see what others are working on today in the shop or kitchen table for all i care.
at work now but last night.. sheesh. ive got a bad case of ocd when
doing things on my pins. repainted spinners on my bow and arrow
and made decals for them and clearcoated them the last two weeks.
then i spent a couple of hours trying to get them perfect and spinning great.
got back up at midnight and messed with one for another half hour because
i couldnt go back to sleep thinking it wasnt as good as it could be.
https://pinside.com/pinball/forum/topic/whats-are-you-working-on-today
This post sounded so familiar...
That's mine lookin good!!!!
Quoted from Stretch7:Installed Powder coating on Time Machine
[quoted image][quoted image]
Quoted from lowbeau67:at work now but last night.. sheesh. ive got a bad case of ocd when
doing things on my pins. repainted spinners on my bow and arrow
and made decals for them and clearcoated them the last two weeks.
then i spent a couple of hours trying to get them perfect and spinning great.
got back up at midnight and messed with one for another half hour because
i couldnt go back to sleep thinking it wasnt as good as it could be.
Ha! If I had a dollar for every time I "finished" adjusting something, put everything away, go upstairs, only to go "damnit" and head back down to try and get it perfect an hour later...
Getting alien poker ready for mgc, stripping topside of playfield for cleaning and wax, and ultrasonic cleaning of plastic parts, new rubber, new ball.
Quoted from Phat_Jay:Getting alien poker ready for mgc, stripping topside of playfield for cleaning and wax, and ultrasonic cleaning of plastic parts, new rubber, new ball.
Nothing for BSD ?
Was up early, so I did some work on my Taxi. Finished my final assembly (the drop targets). I couldn't remember the order of the springs, washer, clips, so it took me a couple tries...
While I was at it, I chipped away at the playfield hardware (mainly tightening posts)
Quoted from snyper2099:This post sounded so familiar...
I did a search before i created this one and nothing came up.
Quoted from Phat_Jay:Getting alien poker ready
One of my favorite games. I have one coming down the pipeline as well.
Quoted from Aeolus7:I couldn't remember the order of the springs, washer, clips, so it took me a couple tries...
Been there before on my Metallica drops ...very frustating
Fixed the right flipper on my 'Hi Dolly'.
The last time I moved it up stairs, I must have not notice the playfield being bumped, which bent the L Bracket that holds the switches in the path of the flipper lever. 4 days ago I discovered the bent L Bracket, and tried to bend it back, how ever the bracket snapped in two. Luckily I have a spare.
Quoted from transprtr4u:Getting the junk out of the Junk Yard
Gotta love getting ridding of junk.... looking good rob
Quoted from Darcy:Fixed the right flipper on my 'Hi Dolly
Still need to play this game one day.
Got a stars last weekend. Working on it this week.
Rebuilding flippers, pop bumper, drops. Need to replace all leg brackets.
Putting resistors on all controlled sockets for LEDs.
Hopefully playing it by the end of this weekend. Waiting on final parts from Pinabll life.
0FDCC829-940D-4DC6-AFC4-238A65CC7F02 (resized).jpegQuoted from Stretch7:got 5 cabinets painted.
now for som
Is that the BSD cab ?
Looking forward to that one
To believe the first one is fishtales that’s going to get rad-cals after that I have no idea lol.
If all goes well tomorrow I’m going to do decals on bsd and afm.
Quoted from Stretch7:To believe the first one is fishtales that’s going to get rad-cals after that I have no idea lol.
If all goes well tomorrow I’m going to do decals on bsd and afm.
Where did you get your BSD decals from ?
They are not mine they were supplied by the customer. I can check with him if you like?
The decals are not originals though they are different artwork.
if you check back in this thread this evening i should have some pictures up of them.
Quoted from Stretch7:They are not mine they were supplied by the customer. I can check with him if you like?
The decals are not originals though they are different artwork.
if you check back in this thread this evening i should have some pictures up of them.
Looking forward to seeing them and how this BSD turns out !
Quoted from mollyspub:Looking forward to seeing them and how this BSD turns out !
Me too on the BSD!
I'm curious on the fish tales Rad decals ,could you give me your opinion on these as I just picked up one up as well
Put a bill validator on JJP Pirates and Stern AC/DC Luci Vault.
Tomorrow install bill validators on MMR, AFMR, MBR.
LTG : )
Quoted from LTG:Put a bill validator on JJP Pirates and Stern AC/DC Luci Vault.
Tomorrow install bill validators on MMR, AFMR, MBR.
Sounds like fun
Quoted from transprtr4u:'m curious on the fish tales Rad decals ,could you give me your opinion on these as I just picked up one up as well
Yes I will
Should be doing it in next week or 2
That looks great G saw the pictures of the decals last week thought they would look great. Came out just stellar, awesome job ....
Quoted from Stretch7:Sounds like fun
I put a 110AC on MMR which uses 12VDC validator.
Yeah, figuring out what made both the validator and game happy, was a lot of fun.
LTG : )
GT has been busy in the shop working on my AFM so thought I would help him out with a post.
- Total strip down and clean and wax of playfield, ramps, metals, plastics
- Black speckle powder on wireform, lockdown, rails, legs, coin door and lasered hinge pivot
- Install of LED mothership
- Install of powerblades, powerpanel, powertranslight
- New cabinet decals
- New posts
- LED lights
- install custom shooter button
Can’t add video here but it is pretty amazing pretty sure GT will add pictures when it is done.
Probably a few other things missed, anyways just some awesome restoration work for my grail pin!!!
Yes been a while since update but afm is pretty much done as well as time machine. Did bunch of repairs on other pins today. Hoping to start back on bsd tomorrow but still waiting on powdercoat.
Rad-Cals come in tomorrow along with mirror chrome trim for t2. Next week I should have eatpm playfield show up as well so going to be busy in weeks to come.
I’ll update with some photos tomorrow.
Time machine is pretty much done, just waiting on some dome covers to come in. I really like how the blue powder on the ramp looks.
Well the Rad-cals have come in for fish tales ....alot thicker than what i thought they would be. Looking forward to installing these.
AFM is pretty much done now, i think the effects looks great and the black powder ties it all in, just need to finish up speaker light kit.
My goal today is to get BSD cab done as far as i can go without the powder parts as
well as playfield back in cabinet.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/what-you-working-on-today?hl=sandeep and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.