(Topic ID: 236026)

What you working on today?

By Stretch7

1 year ago

Topic Stats

  • 117 posts
  • 41 Pinsiders participating
  • Latest reply 11 months ago by Tomass
  • Topic is favorited by 12 Pinsiders


Linked Games

Topic Gallery

There have been 172 images uploaded to this topic. (View topic image gallery).

20190622_161851 (resized).jpg
20190622_160407 (resized).jpg
4B1F5C6F-2547-48E0-8F19-F29EAEE43A12 (resized).jpeg
2 Millionaire MPU parts removed (resized).jpg
4 Millionaire boots and plays (resized).jpg
3 Millionaire MPU after sanding (resized).jpg
1 Millionaire MPU before repairs  bad (resized).jpg
58180351923__0895F84E-FEF7-416A-AB09-050EBF27424D (002) (resized).JPG
IMG_3638 (resized).jpg
IMG_3639 (resized).jpg
IMG_3637 (resized).jpg
IMG_3632 (resized).jpg
IMG_3622 (resized).jpg
IMG_3631 (resized).jpg
58019628820__B41D017C-4C44-4D56-8DB8-07FB97BC355E (resized).JPG
IMG_3652 (resized).jpg

There are 117 posts in this topic. You are on page 3 of 3.
#101 1 year ago

I picked up the custom translite I created and had printed and got it installed in my gottlieb eldorado city of gold. Below are the before (what it had when I purchased it) and after (now) pics:

A010528F-6D3F-4B70-8FBB-B92379F69D0D (resized).jpeg

60A79BD0-FB38-4AB5-8645-2F08CDD3F8F7 (resized).jpeg

1C91E24A-A696-47DF-8319-1BB19AA1F453 (resized).jpeg

5A7B8FA5-574B-48B7-A4FB-668CC15253B4 (resized).jpeg

#102 1 year ago

Slowly but surly coming back from the dead.

Anyone have a Williams or Data East display for sale I can rob the lower elements from?

20190518_143757_resized (resized).jpg
#103 1 year ago
Quoted from trumpy:

TAF p/f swap , no rotisserie ,no wucken furries . 2 x saw horses , and heaps of tape tags . previous owner had added a few extra connectors which made quite simple . have to power up thing to ensure it (I mean thing ) picks ball up , as quite a bit of movement in mounting bolts . on to the cab tomorrow
[quoted image][quoted image][quoted image][quoted image]

I like the red rubber treatment. Looking good!

#104 1 year ago

Yesterday, I replaced an outgassed glass display on a Millionaire display assembly. The plasma ball confirmed it was dead. I used my Taxi game with Pinbot game ROMs to test out the full display before taking it back over to my friend's house. That configuration verified all was good with the display, even all the segments of the alphanumeric glass displays. 20190517_104001 (resized).jpg20190517_101844 (resized).jpg20190517_110439 (resized).jpg

3 weeks later
#105 11 months ago

Just finished up a Scared Stiff and delivered today.

58019628820__B41D017C-4C44-4D56-8DB8-07FB97BC355E (resized).JPGIMG_3431 (resized).jpgIMG_3432 (resized).jpgIMG_3622 (resized).jpgIMG_3631 (resized).jpgIMG_3652 (resized).jpgIMG_3653 (resized).jpg
#106 11 months ago

Up next is another dirty party, this one will be done like the last one but with a couple more extra's.

IMG_3632 (resized).jpgIMG_3637 (resized).jpgIMG_3638 (resized).jpgIMG_3639 (resized).jpg
#107 11 months ago

Highspeed Hardtop prototype! Coming soon

58180351923__0895F84E-FEF7-416A-AB09-050EBF27424D (002) (resized).JPG
#108 11 months ago
Quoted from Skypilot:

Highspeed Hardtop prototype! Coming soon[quoted image]

I hope you're doing SOF next.

#109 11 months ago
Quoted from Skypilot:

Highspeed Hardtop prototype! Coming soon

Good to see
These hard tops are the next best thing to new playfields

1 week later
#110 11 months ago

I didn't start on this today, but I did finish installing the new parts for the battery alkaline damage (NOT acid damage) repair on this Millionaire MPU. It now boots and plays. I just need to fix the speech as it is only half the volume of the music and switch sounds and is a bit distorted. I hate batteries so NVRAM has also been installed.

There is a tricky thing about battery corrosion. If you apply heat to the pad with corrosion, it will eat it up fast, but if you sand down the corrosion and then neutralize it, then you will be able to solder on it just as if it never was damaged.
1 Millionaire MPU before repairs bad (resized).jpg2 Millionaire MPU parts removed (resized).jpg3 Millionaire MPU after sanding (resized).jpg4 Millionaire boots and plays (resized).jpg

#111 11 months ago
Quoted from Stretch7:

What you working on today?

My clothes dryer.

#112 11 months ago

Tommy pinball machine

#113 11 months ago
Quoted from RGAires:

Tommy pinball machine

What on it are you working on?

#114 11 months ago

Did this today.

4B1F5C6F-2547-48E0-8F19-F29EAEE43A12 (resized).jpeg
#115 11 months ago

I mowed the lawn and washed my truck.

#116 11 months ago

Fighting this crap today!

20190622_160407 (resized).jpg
#117 11 months ago

Turned into this.

20190622_161851 (resized).jpg
Promoted items from the Pinside Marketplace
$ 159.99
Lighting - Other
Lighted Pinball Mods
There are 117 posts in this topic. You are on page 3 of 3.

Hey there! Got a moment?

Great to see you're enjoying Pinside! Did you know Pinside is able to run thanks to donations from our visitors? Please donate to Pinside, support the site and get anext to your username to show for it! Donate to Pinside