Brighton
Quoted from lordloss:Tommy and gnr
Pretty sure Tommy shipped with black shooter rod. Red does look much better though - I managed to find one a few years ago but its cracked 
(Topic ID: 164990)
Linked Games
Big Buck Hunter Pro
Stern, 2010-
Sorcerer
Williams, 1985
Topic Gallery
Quoted from tdunbar:I also have a BLue BB Barbara for sale as well PM me
it looks like she's got couch rot 
Phoenix, AZ
Quoted from JBK:Time Fantasy plastics set, stencils, BG, PF.....
http://wildwood4.com/pinball-parts.html
No parts on back.
Stern 4 bank weldment (part # 515-7547-04-88) for Family Guy/Shrek, World Poker Tour and possibly others. The current updated one, does not accept the old style opto boards.
Ottawa, ON
1 week later
doctor who mushroom targets are at Shapeways
https://www.shapeways.com/product/Q6BMQBFSZ/doctor-who-pinball-mushroom-target-button-1-off?optionId=65150367&li=marketplace
IMG_0045 (resized).JPG
IMG_0047 (resized).JPG
and the classic stern tombstone target has gone through some revisions and final
https://www.shapeways.com/product/J8REG7JSC/stern-tombstone-pinball-drop-target-13a-11?optionId=65101924&li=marketplace
IMG_0016 (resized).JPGIMG_0017 (resized).JPGIMG_0019 (resized).JPGIMG_0021 (resized).JPGIMG_0023 (resized).JPG
Quoted from swinks:the classic stern tombstone target has gone through some revisions and final
https://www.shapeways.com/product/J8REG7JSC/stern-tombstone-pinball-drop-target-13a-11?optionId=65101924&li=marketplace
nice job. now someone needs to make a hot stamp for these!
Quoted from twinmice:Any chance on re-running whirlwind plastic sets?
http://bayareaamusements.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=GS-WW31-1006-574
9 months later
Quoted from PPS:I have the prints for this, there is an 03-8230, 03-8230-1, and 03-8230-3 ... would have to figure out what game they went to ...
did these ever get made? Need them for pool sharks, elvira,radical,gilligans island,Buggs bunny,transporter, black rose and all other games with the 6803 bally style backbox.
The -3 variant will work for all of the games but was meant for the WPC BB hinged varites but will work for all of them after you drill a couple holes for mounting screws.
3 weeks later
Quoted from Hawk007:everything for gilligans island.
Ya, best pin ever!! Im good, but support anybody restoring one. Classic pin!
9 months later
Quoted from PPS:I have the prints for this, there is an 03-8230, 03-8230-1, and 03-8230-3 ... would have to figure out what game they went to ...
PPS Rick the part number 03-8230-3 is the channel that the translite sits into on Black Rose and i believe 3 or 4 other machines with the same back box configuration. This part is NOWHERE to be found out in the wild, well not NOS or repro anyway. Any chance these will get remade in the near future??
Sydney
Quoted from Mancave:PPS Rick the part number 03-8230-3 is the channel that the translite sits into on Black Rose and i believe 3 or 4 other machines with the same back box configuration. This part is NOWHERE to be found out in the wild, well not NOS or repro anyway. Any chance these will get remade in the near future??
Was literally just searching for this part (again) myself... for my Black Rose...
Quoted from pocketscience:Was literally just searching for this part (again) myself... for my Black Rose
Mine has got a chunk missing in the middle, probably about 6mm wide and deep from the top edge where the translite nestles into it. I'd love to replace it with a new one but at this stage looks like i may have to do a Dodgy Brothers repair on it
Quoted from Mancave:Mine has got a chunk missing in the middle, probably about 6mm wide and deep from the top edge where the translite nestles into it. I'd love to replace it with a new one but at this stage looks like i may have to do a Dodgy Brothers repair on it
Some numpty of a PO decided to drill friggin' holes in mine - can't figure out for what purpose. Regardless, it's ugly as sin, which is such a shame because the rest of the machine is great.
Quoted from pocketscience:Some numpty of a PO decided to drill friggin' holes in mine - can't figure out for what purpose. Regardless, it's ugly as sin, which is such a shame because the rest of the machine is great.
It happens The one i just picked up had a coin/game counter screwed to the backboard (through the ship plastic) on the upper right corner just below glass level and the usual coin return opening that looked like it had been attacked with a can opener 
Quoted from Boof-Ed:I can’t seem to find a demo man handle trigger anywhere. Don’t know if this can be printed.[quoted image]
Definitely looks printable - just need someone to build the design.
Den Haag
Quoted from Mancave:Mine has got a chunk missing in the middle, probably about 6mm wide and deep from the top edge where the translite nestles into it. I'd love to replace it with a new one but at this stage looks like i may have to do a Dodgy Brothers repair on it
The Dodgy Brothers, classic. The rest of the world will have no idea what we are talking about.
Quoted from xTheBlackKnightx:Some people disagree with me on my position, but try and find a NOS Tron Legacy plastic ramp in 10 years.
Nobody cares right now, just like RS ramps 22+ years ago.
It really comes down to how serious a person is in this hobby, as NOS parts provide "trade fodder" for not only income but deals from brokers/dealers/owners/collectors, not just a private individual game repairs. That is the real benefit.
Many times this can be "overkill" except for the highly breakable "Achille Heel" parts.
10 years was optimistic. Try 2. Tron Legacy (both Pro and LE) ramps are unobtanium now and have been for some time.
Quoted from Luzur:Alot of Gottlieb sys80b ramps.
Heck just print up all of them
Pretty sure you'll have to go to Steve Young for those. 
Quoted from Coyote:Pretty sure you'll have to go to Steve Young for those.
Didnt he just buy the copyright for the manuals? there are people printing Gottlieb ramps every now and then (Hollywood Heat for example) so cant be that bad....can it?
Quoted from Luzur:Didnt he just buy the copyright for the manuals? there are people printing Gottlieb ramps every now and then (Hollywood Heat for example) so cant be that bad....can it?
AFAIK - and I could be wrong, as I don't work for or with him - he has the COMPLETE licensing power for Premier/Gottlieb. He licensed out ROM images to John, but I understood he has everythingelse. Art, manuals, etc.
2 weeks later
Just letting people know if they need a unobtainable part that I have finished off another one and tested well and ready for those that need one.
This part is the Banzai Run Ball Lifter
Thanks to a Canadian Pinsider for trusting me and taking the risk to send me his part out of his game to the other side of the world.
The tested one is the upgraded, beefed up section version which proves the wiring passes through while being more stronger and hopefully will last a long long time.
These are available here at Shapeways at the moment and you can choose a different coloured version.
https://www.shapeways.com/marketplace?type=product&q=swinksbanzai
All my reproduction parts can be found here pinball:
https://www.shapeways.com/marketplace?q=swinksreproduction&sort=newest
Or check out my website for parts by general or by game:
https://swinks.com.au/
banzai run ball lifter (resized).jpg
2 weeks later
4 weeks later
Quoted from PPS:it's 03-8332, I found the print, and sent a request over to [email protected] to see if he has the tool ...
PPS anything ever come of this? There are repro plastics, ramps, backglass, and playfield, but that #eatpm flip-up cover is unobtainium. Thanks!
Quoted from PPS:it's 03-8332, I found the print, and sent a request over to [email protected] to see if he has the tool ...
rick
Hi Rick - any word from James on the Elvira (EATPM) coffin cover project? Thanks.
Quoted from NjayNL:Attack from mars insert panel impossible to find
https://www.marcospecialties.com/pinball-parts/03-9419-500XX
Drill your own. This is what I had to do several years ago, and of course, RIGHT AFTER I did it, they released the 'real' ones. For less money.
I used a step drill to do it and managed to not screw any of it up.
If you don't have your original this of course is an issue.
Quoted from TomT:How about someone 3d printing these? They are the players for the 1968 Bally World Cup soccer game
[quoted image]
We have those in stock, have had them up for years!
https://www.flippers.com/catalog/product_info.php/blue-right-foot-kicker-p-3779
John :-#)#
2 months later
Quoted from Pinballer22:This target face seems impossible to find in any color, need 1 if someone has something that will work.[quoted image][quoted image]
I think i have one or two of these.
6 months later
Quoted from PPS:I have the prints for this, there is an 03-8230, 03-8230-1, and 03-8230-3 ... would have to figure out what game they went to ...
Is this part available yet? I also need this part 03-8230-1 Glass retainer for Transporter. Getting ready to order a ramp, Could combine this with it.
Please advise.
Mike
6 months later
Quoted from Mancave:I have the prints for this, there is an 03-8230, 03-8230-1, and 03-8230-3 ... would have to figure out what game they went to ...
PPS Rick the part number 03-8230-3 is the channel that the translite sits into on Black Rose and i believe 3 or 4 other machines with the same back box configuration. This part is NOWHERE to be found out in the wild, well not NOS or repro anyway. Any chance these will get remade in the near future??
Bumping again 
I know of a bunch of people chasing the glass retainer 03-8230-3 for their Black Rose machines (also used on at least 4 other machines with the same head box configuration) Still absolutely ZERO of these to be found and most have chunks missing/damaged in general which makes even a good 2nd hand one just as hard to find. PLEASE PLEASE PLEASE consider doing this one Rick!!!
With the upcoming release of repro Black Rose playfields from Peter @ Buthamburg this one particular item will be a major sticking point for those wanting to fully restore their machines
3 months later
A part that is no longer available, is the carbon doughnut switch rings that were used
in the old woodrail style pinballs of the 1940's.
Quoted from Lostcause:Can no longer get the steel loop de loop ramp for Gold Wings, comes in three parts. Luckily I managed to repair mine where the tabs snapped off.[quoted image]
More games should have that loop, its so awesome!
1 week later
Quoted from packie1:Is this part available yet? I also need this part 03-8230-1 Glass retainer for Transporter. Getting ready to order a ramp, Could combine this with it.
Please advise.
Mike
Still waiting to hear if any of the Glass retainers for Bally games will be made. In desperate need of 03-8230-1 for Transporter.
Mike
7 months later
Reply
Wanna join the discussion? Please sign in to reply to this topic.
Hey there! Welcome to Pinside!
Donate to PinsideGreat to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
