(Topic ID: 241105)

What Part Have You Made Yourself.


By Raff

5 months ago



Topic Stats

  • 24 posts
  • 15 Pinsiders participating
  • Latest reply 3 months ago by Raff
  • Topic is favorited by 7 Pinsiders

You

Linked Games

No games have been linked to this topic.

    Topic Gallery

    There have been 26 images uploaded to this topic. (View topic image gallery).

    IMG_20190611_212133 (resized).jpg
    101_0094 (resized).JPG
    100_9946 (resized).JPG
    canon12062019 005 (resized).JPG
    canon12062019 004 (resized).JPG
    6f65773b5125610104d58b911b978305c3b69fda (resized).jpg
    492929371d0e9f7383b0ab414a36fa593c7697dd (resized).jpg
    72bf78dcc33e78a7e9de5221f2783335535429ff (resized).jpg
    29c096acfe597fbc48d0e8f8af66bc06c453f08f (resized).jpg
    IMG_2689[1] (resized).JPG
    IMG_2683[1] (resized).JPG
    42E5A06F-F4D6-4249-87EB-435097C15B54 (resized).jpeg
    373A1A24-C4A7-43A2-A538-A991B09E9AF4 (resized).jpeg
    0Space-Mission-Stepper (resized).JPG
    0Space-Mission-Match-Unit-drawing (resized).jpg
    36B89D75-4102-4F9A-B210-43201D032B00 (resized).jpeg

    #1 5 months ago

    I thought I put this up I was looking at buying this part a series bar for a Gottlieb 7 target bank in my country Australia but cant buy it here so looked at Marco pinball and the shipping cost is around $70 transfer into Aussie dollar =Around $100. That's a lot for shipping so I thought I will build it myself.IMG20190419144340 (resized).jpgOriginal Part. IMG20190419144404 (resized).jpg Material to be used. IMG20190419144423 (resized).jpg Cut and holes drilled. IMG20190419144834 (resized).jpg Tools used. Cost for Material =$4. What have you made that you couldn't buy or to keep the cost down.
    Raff.

    IMG20190419144456 (resized).jpg
    #2 5 months ago

    Nice work!
    Hard to imagine the shipping cost can get so high on a relatively lightweight part, but that's a long distance.

    #4 5 months ago

    Looks good. Original steel, remake aluminium? Also, how much time did it take?

    #5 5 months ago
    Quoted from ReadyPO:

    Also, how much time did it take?

    About 45 mints and remake aluminum.

    #6 5 months ago

    I have made some plastics.

    #7 5 months ago

    Coin chutes for Gigi. The pin did not have any and they seem to be hard to find or very pricey. Almost done, these DIY chutes work perfectly. The chute material came from a mangled up Gottlieb coin door.

    20190419_083841 (resized).jpg20190419_084033 (resized).jpg
    #8 5 months ago
    Quoted from TractorDoc:Work!

    I tried this thread idea a couple weeks ago. Mine didn't get much love.

    I like the apron you made looks great i might make some gottlieb aprons in the near future.

    #9 5 months ago
    Quoted from Raff:

    Cost for Material =$4.

    Cost for tools: $100.00

    But well worth it, of course. That's why we buy them in the first place. "I can pay a plumber $100 to snake this, or buy one and do it myself forever".

    Nice work.

    #11 5 months ago

    New projector disc with water slides and a sheet of plastic.
    Old
    ACE38425-26E7-4FCA-A553-9041692F86F7 (resized).jpeg
    Scanned old
    A347F63B-56F2-4F1C-AC04-163D0F9566A6 (resized).jpeg
    Printed new on decal
    44140DAB-2787-402C-960F-DB004C66E6E3 (resized).jpeg
    New disc
    36B89D75-4102-4F9A-B210-43201D032B00 (resized).jpeg

    #13 5 months ago

    Put the series bar in that I made and works like a charm.

    2 weeks later
    #14 5 months ago

    Hi raff
    see the first JPG, green arrow - I had / have a spare stepper like the one in the picture, not having the bakelite plates --- broken off was the arm with the stepping tooth - see in the lower right corner "green arrow, red Y, 1, 2". A challenge - can I do a repair (?) - I tried to do a new construction with screws - hacksawed a new tooth and mounted the stuff --- and it works. My camera is no good --- at least the new screws and the new tooth You can see in the second JPG. Greetings Rolf

    0Space-Mission-Match-Unit-drawing (resized).jpg0Space-Mission-Stepper (resized).JPG
    #15 5 months ago

    Nice work.

    #16 5 months ago

    Not exactly what you were looking for, but custom monster bash topper parts:

    373A1A24-C4A7-43A2-A538-A991B09E9AF4 (resized).jpeg42E5A06F-F4D6-4249-87EB-435097C15B54 (resized).jpeg
    #17 5 months ago

    Modeled some lamp baffles, in both petg white and petg black. These were a big hit at the Allentown show.

    IMG_2683[1] (resized).JPGIMG_2689[1] (resized).JPG
    #18 5 months ago

    Here is a cabinet I made a couple of years back.
    72bf78dcc33e78a7e9de5221f2783335535429ff (resized).jpg492929371d0e9f7383b0ab414a36fa593c7697dd (resized).jpg29c096acfe597fbc48d0e8f8af66bc06c453f08f (resized).jpg6f65773b5125610104d58b911b978305c3b69fda (resized).jpg

    4 weeks later
    #19 4 months ago

    In the process of restoring a recently acquired GTB 1965 Skyline I noticed that at some point the head of the rivet (at right side of pic) supporting the coil stop on the yellow pop bumper had sheared away. A quick and permanent fix was to use a brass bolt (3/16in) and grinding down the head. Extended thread was viced to tension the bolt then lopped off.

    canon12062019 004 (resized).JPG

    canon12062019 005 (resized).JPG

    #20 4 months ago

    Nice job Wayner

    #21 4 months ago

    Made this a couple months ago for my Jackbot. The only parts I didn't recreate from scratch are the two metal brackets underneath. Had to invest in some tools but now I can re-rivet and replace any rusty/worn blue steel flaps on my games. Below it is the beat-to-shit original.
    101_0094 (resized).JPG100_9946 (resized).JPG

    #22 4 months ago

    Great job Jibmums. With the right tools a lot of parts can be made.

    #23 4 months ago

    Rebuilding a STTNG that had been used as a donor for another restoration, so it was missing a lot of parts. Wasn't able to source one of the ramp switch brackets locally, so modeled it in CAD and 3d printed it instead.

    IMG_20190611_212133 (resized).jpg
    #24 3 months ago

    3d printer is the way to go good work nettek.
    I was looking at buying a printer.
    Raff

    Promoted items from the Pinside Marketplace
    $ 24.25
    Cabinet - Shooter Rods
    The MOD Couple
    From: $ 99.99
    Cabinet - Other
    Lighted Pinball Mods
    $ 20.00
    Playfield - Decals
    Flashinstinct
    From: $ 9.99
    Eproms
    Matt's Basement Arcade
    $ 9.90
    Playfield - Toys/Add-ons
    pinballmod
    $ 19.95
    Playfield - Toys/Add-ons
    ULEKstore
    From: $ 9.99
    Eproms
    Matt's Basement Arcade
    $ 79.95
    Playfield - Toys/Add-ons
    Hookedonpinball.com
    From: $ 99.99
    Cabinet - Other
    Lighted Pinball Mods
    From: $ 7.00
    $ 199.00
    Lighting - Interactive
    Medisinyl Mods
    $ 229.99
    $ 39.00
    Playfield - Toys/Add-ons
    The MOD Couple
    £ 32.00
    $ 2.50
    Playfield - Protection
    Pinball Mod Co.
    $ 9.99
    Eproms
    Matt's Basement Arcade
    $ 10.95
    $ 49.00
    Playfield - Toys/Add-ons
    Lermods
    $ 28.99
    Lighting - Interactive
    Lee's Parts
    $ 35.00
    Cabinet - Decals
    Pinball Haus
    $ 6.95
    $ 445.00
    Cabinet - Armor And Blades
    MI Pinball Refinery
    € 89.00
    Playfield - Toys/Add-ons
    YOYOKOPTER MODS
    $ 999.00
    Pinball Machine
    Mircoplayfields

    Hey there! Got a moment?

    Great to see you're enjoying Pinside! Did you know Pinside is able to run thanks to donations from our visitors? Please donate to Pinside, support the site and get anext to your username to show for it! Donate to Pinside