Pittsburgh, PA
Transporter Orion ship
(Topic ID: 212231)
Quoted from Flowst:WHOdunnit center ramp, slot reels and slot motor.
Slot reels were remade once by PPS (out of stock now but should be run again by PPS sometime).
Slot motor is part #14-8024 (same as used on Scared Stiff spider wheel) in stock for $44 at Mad Amusements.
2 months later
TMNT clear ramps
Quoted from adborto:BOP helmet.
BOP Helmet
Space Shuttle Ramps
Doctor Who Topper
Doctor Who 5 Bank Opto Buttons
Doctor Who 5 Bank Opto Housing ( These warp over time. )
Indy 500 - The LED board thing
Quoted from lordloss:Every couple of months/years, someone says this exact same thing. Then they never actually make anything.
Well we made and sold Tube dancers called Barbara which were unobtainable for BBB so take that as one done!
London
Diner playfield. Sign up and help bump it up to get it made sooner than later. http://www.classicplayfields.com/order.html
2 weeks later
2 months later
Going to work on solid, molded reproduction parts for the Space Station diverter/rotator, and the piece under it shortly. I meet with the molder in Oct. for this one. It was a busy summer.
Quoted from littlecammi:Slot reels were remade once by PPS (out of stock now but should be run again by PPS sometime).
Slot motor is part #14-8024 (same as used on Scared Stiff spider wheel) in stock for $44 at Mad Amusements.
The motor is much cheaper at Pinball Life:
2 months later
Seems like we need a major vac table partner for all the clear ramps yet unmade. heck i own several of those pins so i get it.
Update: Space station divertor and under piece will be in production by January. Same quality as the pinbot ramps we have made. Stay tuned.
3 weeks later
4 weeks later
Lisboa
1 week later
Quoted from MRudowsky:High Speed traffic light housing w/lenses. Many sites have it listed, but none of them have had any in stock for over a year.
Limited stock, but we made a few of these using a very high end SLS 3D printer. These also have the correct lenses in them and are clearcoated.
https://www.pinballlife.com/high-speed-traffic-light-housing.html
Thanks,
--Scott
Quoted from TheNoTrashCougar:Limited stock, but we made a few of these using a very high end SLS 3D printer. These also have the correct lenses in them and are clearcoated.
https://www.pinballlife.com/high-speed-traffic-light-housing.html
Thanks,
--Scott
Thanks Scott! I had seen that posted in the other thread. I would have ordered one if I hadn't already sent out separately for a 3D printed version, found in this thread: https://pinside.com/pinball/forum/topic/high-speed-traffic-light-1
Chad - Cpr has your sorceror bg and pf covered.
Space station divertor and under piece going into production this month.
4 weeks later
Rudy’s eyes is an interesting one. Do you have a set you could part with for a while? Interested to know what they are made from.
Saskatoon, SK
Twilight Zone v-pad kicker. For the rocket and auto plunger. It’s just a different plastic kicker pad than the slings on the same metal piece so I’m not sure why this is out of stock everywhere lately, since it’s been done before and just subs a different piece of plastic at the end of a common and current part.
Quoted from Pinballs:Has no-one mentioned Judge Dredd plastics?
I can help you with that!
Quoted from EvonB:Good Judge Dredd Plastics. Just got one and almost all of them are busted. Ugh...
Which ones do you need? 
Gilligan's Island
Quoted from Davedigger:main plastic ramp for Jurassic Park
X2
1 week later
Reply
Wanna join the discussion? Please sign in to reply to this topic.
Hey there! Welcome to Pinside!
Donate to PinsideGreat to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
