The giant rings on the back of hs come to mind, since you have to strip off the ramp, habit trails, and plastics to get to the screws holding em all in.
You're currently viewing posts by Pinsider dsuperbee.
Click here to go back to viewing the entire thread.
The giant rings on the back of hs come to mind, since you have to strip off the ramp, habit trails, and plastics to get to the screws holding em all in.
Quoted from Jeff_PHX_AZ:That's the hardway to do it! Here is what you do, take the playfield out and in the back of the pf is 2 screws holding a piece of wood, take that off you have access to the rubber rings in the back. No taking the ramp off or the habi-trails. Found this trick by accident when pulled the pf out and rested it on the cabinet saw the screws and wholla! 5-10 min and done.
You are crazy!
Removing the PF is WAY more work than the ramps. Also, on mine the ramp would still have to come off, as the rings ran in front of and behind the diverter ASSY.
You're currently viewing posts by Pinsider dsuperbee.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/what-is-the-hardest-rubber-to-replace?tu=dsuperbee and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.