(Topic ID: 95240)

What is for sale in Michigan now (non-scammer edition)

By aalucero

7 years ago


Topic Heartbeat

Topic Stats

  • 7,538 posts
  • 509 Pinsiders participating
  • Latest reply 3 hours ago by Gainey
  • Topic is favorited by 319 Pinsiders

You

Topic Gallery

View topic image gallery

free_(resized).jpg
image_(resized).jpeg
image_(resized).jpeg
image_(resized).jpeg
image_(resized).jpeg
image_(resized).jpeg
image_(resized).jpeg
image_(resized).jpeg
image_(resized).jpeg
image_(resized).jpeg
image_(resized).jpeg
image_(resized).jpeg
image_(resized).jpeg
image_(resized).jpeg
image_(resized).jpeg
image_(resized).jpeg

You're currently viewing posts by Pinsider hemiorange09.
Click here to go back to viewing the entire thread.

#43 7 years ago

I just want to put it out there, that I have some machines available soon in Western Michigan area. I will post pictures soon, still shopping these machines out and possible adding some mods to them.

Addams Family.......$4800.00
Fun House..............$2900.00
Cyclone...................$1800.00
South Park..............$2000.00

Sent me a PM if you are interested in any of them.

Thanks,

Steve
Pinball Refinery

#47 7 years ago
Quoted from HemiOrange09:

I just want to put it out there, that I have some machines available soon in Western Michigan area. I will post pictures soon, still shopping these machines out and possible adding some mods to them.

Asking Prices...

Addams Family.......$4800.00
Fun House..............$2900.00
Cyclone...................$1800.00
South Park..............$2000.00
Sent me a PM if you are interested in any of them.
Thanks,
Steve
Pinball Refinery

Here are some details on these machines....

The Cyclone actually is in very good condition for being original. The mylar has been removed from the playfield. There is a little ball swirl and very little playfield wear near the top lanes, but very little. I have seen a lot worse playfields on Cyclone then this one. The machine is playing great, circuit boards are very nice, no hacks or burn out connectors, ramps are very good, except for the center one has a cliffy protector, it is broken but the cliffy covers the damage. I cleaned and flame polished them. Cabin has a few skiffs nothing to bad. The 3rd score display is bad, but a replacement will get it working again, verified with my volt meter.

#48 7 years ago

On the Addams Family.... I am working on shopping it out right now. It is working 100%, cabinet is in pretty good condition, playfield has some wear in the saucer area where "Thing" grabs the ball, some on the right return lane where the ball drops and someon the scoop area, but a cliffy will easily cover the wear... To sum it up is will be a nice players machine. The circuit board and connectors are in very good working condition, no hacks, no issues....

Thanks,

Steve

1 month later
#110 7 years ago

I have a Stock Demolition Man with dark metallic blue armor or can convert it into a Demolition Man on Steroids.... Here is a thread that I started explaining the upgrades....

https://pinside.com/pinball/forum/topic/-fs-demolition-man-on-steriods-or-stock-dm-in-western-mi-

IMG_20140430_193841_024.jpg
2 months later
#291 7 years ago

I can get Metallica Pros NIB from Stern, and I just sold a TOTALLY tricked out Metallica Pro as well....

I have a Stargate that was just traded in (I'll post pictures soon).

I also have a very nice Addams Family with ColorDMD installed, going to be asking $5100. It has a few mods already in it, the polar bear mod, fully LEDs and a few others. I will be adding a few more custom lighting upgrades kit for it as well for this machine. Just to make it unique. Also the top side has been taken apart, clean, polished, shopped, and new clear ramps installed, also in faded cabinet... It's a very good customer of mine who it very particular with his machines.

I'll have it in my shop next week Wednesday.

PM me if you are interested in these machines.

Steve
Pinball Refinery

#293 7 years ago

---------UPDATE 10/29/14.... Sale Pending on this machine.------------

I have some pictures of just the cabinet of this Addams and here's the list of what it currently has on it.

1.) ColorDMD
2.) New Chrome legs
3.) Blue pincabs protectors
4.) New coin door
5.) Buckwerks headset jack
6.) Uncle Fester shooter rod
7.) Blue led's added in topper
8.) Cointaker LED's everywhere
9.) Uncle Fester chair mod
10.) Cliffys
11.) Light up train integrated with target
12.) Blue LED bookcase mod with bookcase decals
13.) Polar bear ramp mod (green led in eyes)
14.) Swamp led mod
15.) Decals for Things box
16.) Target armor
17) New Clear Ramps

It's complete shop out. The cabinet has zero fading, there are a few knicks here and there nothing bad.

I will be going to John Dayhuff's party on Nov 1st, if you want to purchase this machine and you are attending, I can delivery it to you at John's Party.

If you are looking for a nice Addams then this is the machine....

Thanks,

Steve
Pinball Refinery

100_2945-Optimized.JPG
100_2946-Optimized.JPG
100_2947-Optimized.JPG
100_2948-Optimized.JPG
100_2962-Optimized.JPG
100_2961-Optimized.JPG

#294 7 years ago

Last of the pictures for now....

100_2949-Optimized.JPG
100_2950-Optimized.JPG
100_2951-Optimized.JPG
100_2952-Optimized.JPG

#298 6 years ago

I have a Stargate available for the $2500.00 range, I just need to set it up and post some pictures.

#310 6 years ago

Here are some pictures and a video in attraction mode of the Stargate that I am selling for a customer of mine. I did a little driver board repair on it, the left sling shot was not working and a few bulbs needed to be replaced but everything is working great now. Asking $2500.00 obo for this machine.

EDIT 11/2/14... This machine is sold....

Thanks,

Steve
Pinball Refinery
231-740-8575

IMG_20141029_154655_550.jpg
IMG_20141029_154735_100.jpg
IMG_20141029_154800_241.jpg
IMG_20141029_155212_231.jpg
IMG_20141029_155140_045.jpg
IMG_20141029_155216_895.jpg

3 months later
#744 6 years ago

I am selling a nice players condition Black Knight. I took this machine on trade from a local pinball buddy/Pinsider. I had to install a different working driver board, the old one in the machine was very tired. Everything is now working great. There's a little wear on the sword inserts and where the pinball enters the upper playfield, but none on the magna-saves. The back glass is pretty decent for an original. There a few scuffs and scraps on the cabinet, but is solid without any water damage. I have the schematic and owners manual as well. Also the left sling shot is broken in the picture. I found the broken piece in the machine and super glued it back on.

I wanted to offer it here on the MI thread on Pinside before it goes on Craiglist. Selling it for only $1295 for this classic machine. I'm located in Western MI.

EDIT....This machine is SOLD

Steve
Pinball Refinery
231-740-8575

20150222_204525.jpg

1 week later
#778 6 years ago

Here's a deal for someone on a project machine .... I just took in this 1985 Gottlieb ROCK system 80B machine for a trade towards another machine. It is complete machine, but NOT working. I do not know what the problem is, but I need to make some room.

I need $250.00 cash and carry for it, otherwise it's going to be parted out to make room.

Steve
Pinball Refinery

20150305_175616.jpg
20150305_175630.jpg
20150305_175831.jpg

#784 6 years ago

ROCK is pending pickup for this weekend. I'll let everyone know when it's gone....

Thanks everyone for the interest,

Steve
Pinball Refinery

#792 6 years ago
Quoted from HemiOrange09:

ROCK is pending pickup for this weekend. I'll let everyone know when it's gone....
Thanks everyone for the interest,
Steve
Pinball Refinery

ROCK is SOLD and picked up by it's new owner.

2 weeks later
#874 6 years ago
Quoted from marcand:

What's for sale coming to Detroit Expo? Pinball at the Zoo?

I will have a booth set up on Friday and Saturday at MPE.... I will have a 1981 Bally Vector for sale and possible 2 other machines also for sale. The other 2 machines are a customer's and I don't know what his prices will be on them. One is a NIB just opened Metallica Pro that I am customizing, it has zero plays on it and the other one is a very nice White Water.

Steve
Pinball Refinery

4 months later
#1587 6 years ago
Quoted from DylanFan71:

My TWDLE is available. Low plays. It has a bunch of mods. Steve from Pinball Refinery did some great lighting effects. Has a Colordmd and color speaker inserts that change together. Also has the fence with colored EL barbed wire. Laseriffic topper. Bicycle girl mod. Mezelmod signs. Custom shooter and a shaker motor $7.400.

Wow... This is a great deal for this WDLE, Mike keeps his machines in mint condition.

Good luck with your sale,

Steve
Pinball Refinery

4 weeks later
#1712 6 years ago

I'm going to be selling a customized KISS Pro soon, that I developed mods on and new Axe armor.

Just let me know if your interested in it.

Steve
Pinball Refinery

20150831_142332.jpg

20150831_191328.jpg
20150831_191237.jpg

20150831_142308.jpg

#1738 6 years ago

I am selling a Demo Man on Steroids for a friend.

Here is a thread that I started.... https://pinside.com/pinball/forum/topic/for-sale-demo-man-on-steroids

Please PM or call me if your interested,

Steve
Pinball Refinery
231-740-8575

CIMG1761.jpg
CIMG1762.jpg
CIMG1763.jpg

CIMG1770.jpg

2 months later
#1947 5 years ago

Update: THIS MACHINE IS SOLD

I have a WCS94 that I am looking to sell for $2650 or entertaining a trade deal as well. It's a very nice machine, fully LEDs, no issues or errors, plug and play ready. I'm in Western Michigan. I have lots of pictures. I have legs for the machine, just not in any pictures.

PM me if your serious interested,

Steve
Pinball Refinery

20150207_133438.jpg
20150207_134316.jpg
20150207_140631.jpg
20150207_133520.jpg
20150207_133450.jpg

20150207_133543.jpg
20150207_140754.jpg

1 month later
#2226 5 years ago
Quoted from DylanFan71:

At the rate Mike changes up games, you'll have plenty of chances to see his collection.

^^^^^^^^^^^^ ^^^^^^^^^^

#2234 5 years ago
Quoted from Kawasakiltd:

Pins are like bunny rabbits they just seem to multiple and some times very fast.

As long as you have enough cabbage to feed your rabbits, yes they'll multiply quickly and fill your area fast.

#2256 5 years ago
Quoted from Astropin:

Just wanted to say thanks to Steve at Pinball Refinery for a great transaction today:
V__EFA7_(resized).jpg

It was nice seeing you again and I know you'll be playing your new GOT Pro all weekend long...

Thanks again and enjoy the new addition to the your collection.

Steve
Pinball Refinery

2 weeks later
#2350 5 years ago

Deposit made, Sale is Pending....

I am selling a complete project Gottlieb System 3 Wipeout that has a boot up issues. I have replaced the battery, U11 74HC123AN, both caps c20/c21 and the GPROM chip.. It's all there so this is a great project machine for you Gottlieb System 3 guys.

Deposit made, Sale is Pending.... $595.00 obo take this machine.

PM or call me if you want this project,

Steve
231-740-8575

20160213_153240_(resized).jpg
20160213_153323_(resized).jpg
20160213_153251_(resized).jpg
20160213_153256_(resized).jpg
20160213_153214_(resized).jpg
20160213_153502_(resized).jpg

1 week later
#2478 5 years ago

EDIT... This machine is SOLD.

It is Highly Customized and looks Amazing. I almost don't want to sell this one.

Here's a few pictures of it....

Steve
Pinball Refinery
231-740-8575

20160220_095704_(resized).jpg
20160220_095746_(resized).jpg
20160220_095801_(resized).jpg
20160220_095827_(resized).jpg
20160220_095925_(resized).jpg

#2485 5 years ago

Thanks everyone ..It has a brand new ColorDMD just installed and several other upgrades, undercab lighting, speaker lighting (still need to add), extra figures, TV mod that plays Itchy and Scratchy, complete LEDed, side, speaker panel and rear artwork, Duff Beer can, Duff Man, Moe's Tavern sign, my garage door lighting mod, chrome leg bolts.

It was a routed machine in very nice condition, the cabinet has a few little nicks in it and the front on the cabinet has some repairs on it, but looks nice..

Steve
Pinball Refinery

20160213_132114_(resized).jpg

20160204_211427_(resized).jpg
20160211_161611_(resized).jpg

20160213_132402_(resized).jpg

#2486 5 years ago
Quoted from GravitaR:

Don't blame you there. The nuclear package looks pretty darn sweet.

Thanks. ... You'll have to check it out tomorrow when you pick up the Wipeout

Steve

#2540 5 years ago

Coming soon and these will be for sale:

a Custom Shrek and a custom The Walking Dead Premium machines....

Steve
Pinball Refinery

2 weeks later
#2644 5 years ago

I just finished and selling a Bally Freedom Solid State machine. This was Bally's first SS machine during the production run of Freedom and only 1500 were made. This machine is working great and in nice condition. Boots up and plays fast.

Update.... This machine is SOLD.

Thanks,

Steve
Pinball Refinery
231-740-8575

20160312_142340_(resized).jpg
20160312_142353_(resized).jpg
20160312_142326_(resized).jpg
20160309_192702_(resized).jpg

20160312_142445_(resized).jpg

#2645 5 years ago

Also I'm selling a complete project William Lucky 7 machine. It's having a trouble booting up and stay running. I've had it for a few years and doing some spring cleaning. Call, Text, or PM me, asking $400.00.

UPDATE. ... SOLD and Picked Up.

Thanks,

Steve
Pinball Refinery
231-740-8575

3 weeks later
1 week later
#2842 5 years ago
Quoted from Zarklin:

Speaking of Holy Grails... If any of my fellow Michiganders ever come across one of these in their pin hunting travels you will be my hero I think I put enough quarters into this game at the county fair to have bought one lol

CarnEvil_Midway_Rail_Shooter_V2548_(resized).jpg

I had a Carnevil machine just like this in perfect working condition... I sold it just over a year ago to a buddy in SC.

It was a cool game, but the wife TOTALLY hated it, she is not a fan of clowns, especially evil ones..

3 months later
#3106 5 years ago

I have a NIB Ghostbusters Pro being delivered tomorrow that I will be customizing over the next few weeks. This machine is up for grabs if anyone is looking for a PR Ghostbusters Pro.

Here are a few pictures of one that I did at Allentown earlier this year,

Steve
Pinball Refinery
231-740-8575

20160506_102643_(resized).jpg
PR_GB_2_(resized).jpg
My_PR_GB_at_Pinfest_(resized).jpg

#3111 5 years ago

I was skeptical as well on the white powder coating at first, until I seen it on the machine... Then I changed my mind.

The Ghostbusters Pro arrived and check out the white powder coating glow in the dark after I charged it with UV LEDs for a minute... In my opinion, it looks SWEET and perfect for Ghostbusters pinball.

20160722_132404.jpg

20160722_133055_Richtone(HDR).jpg

20160722_133205.jpg

#3112 5 years ago
Quoted from DanTheGlassMan:

That looks awesome. I think you should put white t molding on the backbox though to match the trim on the cab....

Yeah.... That's easily done and in the works.

#3122 5 years ago
Quoted from Underspin:

Lucky Seven project, a machine you don't come across too often. Machine is complete but not working. Some spidering on the backglass but not horrible. I have a playfield glass as well. Includes manual. I have $300 into it and need to make room in the shop and get the money back out of it. I'm north of Grand Rapids.

Hum. Looks familiar. .. GLWS.

4 months later
#3589 4 years ago

I have a few highly customized machines for sale on my website both are HUO machines. Spiderman is was a trade in and TSPP is on consignment. Pm or Email me for anymore questions.

Here is a link to my website for the details: http://mipinballrefinery.com/pre-played-pinball-machines

Thanks,

Steve
MI Pinball Refinery

#3602 4 years ago

I added a few more HUO customized machines for sale on my website.

Here's the current list of machines for sale.

1. Spiderman
2. TSPP 
3. Tron Pro
4. MMR
5. WWE LE

Pm or Email me for anymore questions.

Pictures and details are here on my website:

http://mipinballrefinery.com/pre-played-pinball-machines

Thanks,

Steve
MI Pinball Refinery
231-740-8575

#3610 4 years ago
Quoted from wizard_mode:

Some sweet looking pins you have there. Nice work!

Thanks everyone. ... I'll be adding a few more all HUO customized machines soon to the my website. Here's what the others will be... polished brass armor LOTR, black gold metal flake powder coated Elvis LE, candy red powder coated IMVE and possibly 1 more title. I am selling this on consignment for Asylum. We go way back and I'm set up a lot better for shipping this AMAZING collection of machines then he is.

PM, email or text me if your interested,

Steve
[email protected]
231-740-8575

#3621 4 years ago

I have everything listed with pictures and here is a Link to them:
http://mipinballrefinery.com/pre-played-pinball-machines
Home Use Only Customized Spiderman $6795.00
Home Use Only The Simpsons Party Pinball $6295.00
Home Use Only Highly Modified Original TRON Pro 3D Translite $7695.00
Home Use Only Customized Medieval Madness Remake $8695.00
Home Use Only Customized Lord of the Ring $7900.00
Home Us Only Rob Zombie $5600.00
Home Use Only WWE LE #71 $5995.00
Customized Elvis LE $3900.00
Thanks,
Steve
MI Pinball Refinery
231-740-8575

Archived after 85 days
1242 views
Contributed for this NIB listing
Machine - For Sale
HUO - Documented (Home Used Only) “I have several customized machines listed on my website with pictures and descriptions about them. Here is a Link to it: http://mipinballrefinery.com/pre-played-pinball-machines ...”
2017-01-08
Muskegon, MI
Contact

Added over 5 years ago: Spiderman. ... Deposit / Sale Pending
TRON .... Deposit / Sale Pending
Rob Zombie. ... Deposit / Sale Pending
Elvis LE. .. Deposit / Sale Pending

MMR. ... Keeping for now.
WWE LE. ... Keeping for now.

Thanks Everyone ,

Steve
MI Pinball Refinery

1 week later
#3623 4 years ago

I have a Stark Industries Ironman topper for sale... $200.00 firm plus shipping. This is a view of the IM chest reactor that has LEDs pulses. I've heard these are no longer available.

This is a steal of a deal compared to the Stern toppers these days... Just listed it on the mods for sale.

Archived after 0 days
126 views
Sold (amount undisclosed)
Contributed to Pinside
Mod - For Sale
Used, good condition “I have this used Ironman or IMVE topper for sale. It was on a machine that my customer did not have the ceiling height in his game room so I am selling it. I have heard that these ...”
2017-01-17
Muskegon, MI
200 (Firm)

Steve
MI Pinball Refinery
www.mipinballrefinery.com

#3627 4 years ago
Quoted from Underspin:

I thought you were out of business.

Lol Apparently I am still working and have not won the Mega Millions jack pot.

Thanks for reminding me that I still have to work .....

Steve
MI Pinball Refinery
www.mipinballrefinery.com

#3628 4 years ago
Quoted from Chambahz:

Can someone please buy that LOTR asap? I saw it last weekend and now it haunts my dreams. I'm off this week and contemplating making the trip back (7hrs each way) to get it.
Bump for a great seller with unbelievable looking pins!

Just installed a brass plated apron on this bad boy, like it needed anything more. But why not finish it off 100%. Darn it, this thread will not let me post any pictures of it...

4 weeks later
#3688 4 years ago

I just added a HUO AC/DC for sale.

Steve
MI Pinball Refinery

Archived after 1 day
487 views
Sold for $ 7,600
Contributed to Pinside
Machine - For Sale
HUO - Documented (Home Used Only) “This is a Beautiful Home Use Only AC/DC Premium that’s in excellent condition. Here is the list of upgrades that have been added to it: 1. Refinery Shoot to Thrill Cannon Mod ...”
2017-02-16
Muskegon, MI
7,895

5 months later
#4114 4 years ago

I'm selling a HUO SMVE and 4 other machines
Restored Flash Gordon
Demo Man on Steroids
Totally Customized Rob Zombie Refinery Edition #1
WWE LE #71

PM me if you're interested in any of these machines.

Thanks,

Steve
MI Pinball Refinery

Archived after 44 days
1214 views
Sold off Pinside
Machine - For Sale
HUO - Documented (Home Used Only) “I am selling a Pinball Refinery #3 HUO Ghostbusters Pro that I took in on trade from a customer of mine. It is like new condition, no insert problems with a long list of my Refiner...”
2017-11-08
Muskegon, MI
5,995

#4126 4 years ago
Quoted from KingBW:

Is this the SMVE that was at the PATZ this last year?

That customized SMVE that was at PATZ was over a $8K machine .... And I sold that one at Pinfest in Allentown this year.

This machine and the others are still available for sale.

Steve
MI Pinball Refinery

3 months later
#4374 3 years ago

I took a in trade a HUO Ghostbuster Pro, and decided to convert it into one of my Refinery Editions. I just finished it and have all of the upgrades and current pictures listed on my website.

Here is the link: https://mipinballrefinery.com/pre-played-pinball-machines

This machine looks and plays like new and only about 70 plays are on the latest code of 1.13. No insert issues with this machine, $5995.00. Call or PM me if you are interested in this machine.

Thanks for looking,

Steve
MI Pinball Refinery
231-740-8575

2 months later
#4483 3 years ago

I just listed a BOP with new parts to restore this machine....

Steve
MI Pinball Refinery
231-740-8575

Archived after 1 day
363 views
Sold for $ 2,500
Contributed to Pinside
Machine - For Sale
Partially shopped/refurbished “I've had this Bride of Pinbot for about 3 years waiting for a complete restoration on it. Well I'm not sure it will happen,so I'm selling the machine and all the parts that I have ...”
2018-01-09
Muskegon, MI
2,695 (OBO)

4 months later
#4794 3 years ago

I hope this is nothing... Thoughts and Prayers to John and Sue Ann....

God Bless,

Steve
MI Pinball Refinery

2 months later
#4929 3 years ago

I have a beautiful high end restored Pharaoh for sale....

Archived after 13 days
2100 views
Sold for $ 3,500
Contributed to Pinside
Machine - For Sale
Fully restored (full original status) “I have had this machine is my personal collection for a while now and sad to say it's time to put it up for sale. Yes, I know it's a high price to pay for a Pharaoh, but this machi...”
2018-07-26
Muskegon, MI
3,700

#4941 3 years ago

I have a new custom Pinball Refinery Edition Iron Maiden Pro for sale. I decided to customized one and offer it so someone would not have to wait for me to convert one, so this one is ready to go... I posted pictures of this machine in my IMDN thread

https://pinside.com/pinball/forum/topic/in-progress-pinball-refinery-editions-of-iron-maiden-all-versions

Steve
MI Pinball Refinery

1 week later
#4958 3 years ago

Coming in soon...One of my fully loaded HUO Pinball Refinery Metallica Pro (under 50 plays on it), and a MMR (Standard Edition) with ColorDMD chip install (under 60 plays on it). Once I have the machines in I will post some pictures.

PM me if you're interested in these machines.

Steve
MI Pinball Refinery

Added over 3 years ago:

The MMR is on hold for a Pinsider, just waiting for it to arrive.

Added over 3 years ago:

The Metallica is on hold for a Pinsider, just waiting for it to arrive.

#4959 3 years ago

Also I am looking to purchase an original backglass for a Williams Pharaoh... Please PM me if you have one, or know where one is...

Steve
MI Pinball Refinery

#4962 3 years ago

I just listed a custom HUO GOT LE and a custom HUO KISS LE on my website for sale...

Here is a link to check them out: https://mipinballrefinery.com/pre-played-pinball-machines

Thanks,

Steve
MI Pinball Refinery

#4990 3 years ago

Here are the GOT LE and KISS LE that I am selling...

Archived after 22 days
1280 views
Sold (amount private)
Contributed to Pinside
Machine - For Sale
As new - New out of box (first owner) “I have for sale a loaded up Game of thrones LE for sale. This is a Home Use Only, 1 owner machine that looks like it was just opened from the box. If you're interested in having th...”
2018-08-23
Muskegon, MI
7,300

Archived after 71 days
1443 views
Sold (amount private)
Contributed to Pinside
Machine - For Sale
As new - New out of box (first owner) “I have a sweet 1 owner Home Use Only KISS LE, this machine is a MUST HAVE for the ROCK-N-ROLL collection.... If you're interested in having this KISS LE in your collection please c...”
2018-08-23
Muskegon, MI
6,750

2 weeks later
#5050 3 years ago

I have a nice Guardian of the Galaxy Pro for sale. This is a HUO machine that looks like it was just opened from the box and plays like new. This is a great machine with all of the upgrades that have been added.. (Pictures at https://mipinballrefinery.com/pre-played-pinball-machines)

1. Stern GOTG topper.

2. Spike system speaker lighting.

3. Inside cabinet side artwork.

4. Pinball life Spike system mod power supply.

5. Flipper button Lights.

6. Spike system Shaker motor.

7. Cliffy's shooter lane and scoop area, (not installed)

8. Titan flipper rubbers

9. GOTG plastic protectors

Asking $5600.00

Steve
MI Pinball Refinery

2 weeks later
#5096 3 years ago

I still have this 1 owner HUO KISS LE for sale. I'm willing to remove a few upgrades and adjust my price some....Send me a PM....

https://pinside.com/pinball/forum/topic/for-sale-huo-1-owner-custom-kiss-le

Steve
Mi Pinball Refinery

1 month later
#5144 2 years ago

I am selling this collectors condition Bryan Kelly restored Williams Indiana Jones on consignment for a local collector..... It's a beautiful machine. Here is the link to my website for pictures and more information.

https://mipinballrefinery.com/pre-played-pinball-machines

Thanks,

Steve
MI Pinball Refinery

1 week later
#5159 2 years ago

I am selling a nicely loaded HUO MMR for $8995.00 .... Here is the link on Pinside: https://pinside.com/pinball/forum/topic/fs-huo-loaded-mmr-lots-of-high-end-upgrades-added#post-4687080

EDIT.... This machine is SOLD. I have a totally customized LOTR coming in soon if anyone is interested in it, just PM me.

Steve
MI Pinball Refinery

2 weeks later
#5174 2 years ago

I just listed a new Pinball Refinery #1 for sale

Archived after 44 days
1810 views
Not sold
Machine - For Sale
NIB - New in box (distributor/business) “I finished up this NIB MI Pinball Refinery Deadpool #1 and it's ready to ship Here is the list of upgrades that were added to this machine: 1. Purple/Blue 2 stage custom powder ...”
2019-01-12
Muskegon, MI
7,150

I have a HUO Pinball Refinery #2 Rob Zombie for sale, and I only made 2 of them.

Archived after 25 days
877 views
Not sold: Decided to keep game
Machine - For Sale
HUO - Documented (Home Used Only) “This is a Refinery Edition #2, Rob Zombie machine and only 2 Refinery Editions were made, so here is your chance to get one of them. Here is the list of upgrades that were added ...”
2018-11-28
Muskegon, MI
7,000

I will have more titles in soon and I'll list them as well.

Steve
MI Pinball Refinery

#5177 2 years ago
Quoted from c508:

hemiorange09 I really like the purple on that #Deadpool

Thanks... I have seen other machines done in red and I feel there is a lot of red in the artwork. So I did this color to complements the machine and it looks great.

Steve

1 week later
#5194 2 years ago

I have a 2018 AFMr SE for sale for $6800.00. It is new is the come it only has 85 plays on it and this included a few test plays for me..

Super nice AFMr...

Steve
Mi Pinball Refinery
231-740-8575

Added over 3 years ago:

This machine is SOLD... Thanks everyone for the interest. I have more machines coming in soon.

Steve
MI Pinball Refinery

#5198 2 years ago

I just listed a customized Pinball Refinery #1 Lord of the Rings for sale.... Here is the link to the ad.

Archived after 2 days
899 views
Sold for $ 7,595
Contributed to Pinside
Machine - For Sale
Fully shopped/refurbished “I am selling this 1 of a kind Pinball Refinery Edition #1 for my customer. It's a highly customized machine for the person that wants everything. The flipper coils have been upgrad...”
2018-12-15
Muskegon, MI
7,595 (OBO)

Thanks,

Steve
MI Pinball Refinery

3 months later
#5356 2 years ago

I just listed machines for sale that I can take to PATZ at the end of the month for delivery....

Steve
MI Pinball Refinery

Archived after 21 days
794 views
Sold off Pinside
Machine - For Sale
Fully restored (full original status) “This is a very nicely restored F-14 TomCat. This is hands down the best looking F-14 I have ever seen in 30 years in this hobby/business. There is so much to list that has been don...”
2019-04-07
Muskegon, MI
3,600

Archived after 25 days
922 views
Sold (amount private)
Contributed to Pinside
Machine - For Sale
Partially shopped/refurbished “I am selling a nice looking High Speed machine. This machine has a new playfield installed and many other parts as well, including new LED displays, fully LEDs and power supply, ju...”
2019-06-04
Muskegon, MI
3,200

Archived after 6 days
319 views
Sold for $ 6,000
Contributed to Pinside
Machine - For Sale
As new - New out of box (first owner) “1st owner, HUO Total Nuclear Annihilation with 28 plays on it since code 1.2.1 was install on 5/13/18 Plays perfect just like it was new and these upgrades were added to this mac...”
2019-04-07
Muskegon, MI
6,000

5 months later
#5765 2 years ago

I have a nice players condition High Speed 2 Getaway for sale. Playfield is really decent, everything working (except beacon motor missing), no credit dot error. Has Donut Heaven mod... no trades just cash sale $3200.00...PM or call me if you would like it.

Here is the Pinside ad

Archived after 7 days
425 views
Sold for $ 3,100
Contributed to Pinside
Machine - For Sale
Partially shopped/refurbished “I am selling a nice playing High Speed 2 Getaway machine. Everything is working on the machine, plays great. Also have the donut heaven mod installed. It's missing the topper m...”
2019-09-20
Muskegon, MI
3,100

Steve
Mi Pinball Refinery
231‐740‐8575

#5783 2 years ago
Quoted from HemiOrange09:

I have a nice players condition High Speed 2 Getaway for sale. Playfield is really decent, everything working (except beacon motor missing), no credit dot error. Has Donut Heaven mod... no trades just cash sale $3200.00...PM or call me if you would like it.

Lowed this machine $100.00... also I can take to Chicago Expo if needed for pickup.

Steve
MI Pinball Refinery

2 months later
#5930 1 year ago

Coming up for sale on customer consignments. I am not sure on prices yet, but I'll post pictures and prices when the machines arrive. All of these machines are HUO.

Stern Star Wars LE

Stern / Pinball Refinery Edition Batman 66 Premium (loaded)

JJP Dialed In LE

Maybe a SUPER nice fully loaded original Williams version, Medieval Madness

If you're interested in any of these machines please PM me and I will let you have first look at them.

Steve
Mi Pinball Refinery

#5932 1 year ago

I have 2 machines at my shop that are for sale and I can ship if needed. Here are the Pinside ads....

Thanks,

Steve
MI Pinball Refinery

Archived after 20 days
592 views
Sold for $ 7,500
Contributed to Pinside
Machine - For Sale
HUO - Documented (Home Used Only) “I am selling this Dialed In LE machine with some nice upgrades that have been added to it. This is a HUO machine that I am selling for a customer, so I am not interested in any tra...”
2019-12-08
Muskegon, MI
7,500

Archived after 68 days
802 views
Sold off Pinside
Machine - For Sale
HUO - Documented (Home Used Only) “I am selling this Pinball Refinery Edition of a Batman 66 Premium machine for a customer of mine with just over $3200.00 additional upgrades that were added. This is a Pinball Refi...”
2019-12-08
Muskegon, MI
9,600

2 months later
#6108 1 year ago

I have a few machines that I will be selling on consignment for a customer. I should have them picked up tomorrow or Sunday at the latest. I just wanted to post and see if anyone is interested in these titles.

One will be a player's condition (playfield is worn) Taxi. It has a new LED displays, LEDs through out the playfield and it is working/playing just fine. Nice machine for the price, which I will have pictures and price once I have the machine.

The other one is a Bally Special Forces, nice looking machine and plays great as well. Again I will have more details once I have the machine here.

Possibly a third machine???? He is unsure if he needs to sell another machine, more details to come.

Thanks,

Steve
MI Pinball Refinery

Added 19 months ago:

Both machines are sold.

2 weeks later
#6152 1 year ago

I am some machines for a customer that is moving and can't take all of his machines to his new place.

The titles are Whirlwind, Earthshaker, and Funhouse,

I am still unloading them and setting the back up at my shop. I will have pictures and more details about them later today, WW and ES will be in the $3000 to $3500 range. I know this customized Fun House will be $5200 range. All of them have several upgrades added to them including Whirlwind has a shaker motor installed my me when the disc spin the shaker motor is on, very cool effect. I only did this on this machine because it was not easy to figure out... More detail shortly.

And yes I PMed Zarklin already he was going to look at a DE JP machine.

Please let me know if you're interested.

Steve
Mi Pinball Refinery
231-740-8575

UPDATE: Here are the ads with pictures listed on Pinside.

Archived after 20 days
788 views
Sold for $ 2,700
Contributed to Pinside
Machine - For Sale
Used - shows wear but 100% working and clean “I am selling this machine on consignment for customer of mine, he is moving and just does not have the room at the new place for this machine. This is a nice playing Williams Earth...”
2020-03-15
Muskegon, MI
2,895

Archived after 3 days
488 views
Sold for $ 3,500
Contributed to Pinside
Machine - For Sale
Fully shopped/refurbished “I am selling this machine on consignment for customer of mine, he is moving and just does not have the room at the new place for this machine. This is a nice playing Williams Whirl...”
2020-03-15
Muskegon, MI
3,500

Archived after 19 days
1480 views
Sold for $ 4,800
Contributed to Pinside
Machine - For Sale
Partially shopped/refurbished “I am selling this machine on consignment for customer of mine, he is moving and just does not have the room at the new place for this machine. This is a nice playing Williams Funho...”
2020-03-15
Muskegon, MI
4,995

3 months later
#6353 1 year ago

I am selling 2 consignment Pinball Refinery machines for a customer of mine. He ordered these machines new from me and is downsizing.

I have a 2010 highly customized Pinball Refinery with tons of upgrades that I offered for a original Ironman machine (not the vault edition), very nice machine and plays great for $6500.00 obo.

A 2017 highly customized Pinball Refinery with tons of upgrades that I offered for a Metallica Premium, sweet machine and plays like new for $7995 obo. I am also going to offer the new owner a crazy powder coating job for this machine that I have not done before. I know it will look INSANE and make it one of a kind Metallica Premium.

I also have a non-pinball item for sale... I have am original Joust arcade machine, no issues, no monitor burn in, new power supply, and upgrades on the CPU board (chips). Plays great and makes a nice filler machine for the game room. SOLD....

I wanted to post here first for a local sale/pickup.

Please PM me if you are interested,

Steve
MI Pinball Refinery

Added 15 months ago:

Metallica is SOLD

2 months later
#6486 1 year ago

I am selling a Attack from Mars SE and a Williams Joust video arcade on consignment for a customer... Here are the ads listed.

If you're interested drop me a PM, sorry no trades on these machines,

Steve
MI Pinball Refinery

Archived after 6 days
388 views
Sold for $ 6,600
Contributed to Pinside
Machine - For Sale
Routed - fresh off route “I am selling this Attack From Mars Special Edition on consignment for a customer. My customer purchased this machine and it has just under 1300 plays on it. The only reason he is s...”
2020-09-12
Muskegon, MI
6,800

Archived after 36 days
352 views
Not sold: Decided to keep game
Other - For Sale
“I am selling this VERY NICE Williams Joust Arcade game on consignment for a customer. My customer ran out of room in his game room and had to sell this machine. Here is your chance...”
2020-10-30
Muskegon, MI
1,500 (OBO)

2 months later
#6672 10 months ago

I just listed on consignment for customers a Bally Fathom and one of my custom Pinball Refinery Aerosmith Pro. Sorry no trades just cash sales

Pm me if interested.

Archived after 4 days
1334 views
Sold for $ 4,500
Contributed to Pinside
Machine - For Sale
Fully shopped/refurbished “I am selling on consignment for a customer this 1981 Bally Fathom. He purchased this machine from Buffalo Pinball who when through everything and made it was it is now. It does hav...”
2020-12-06
Muskegon, MI
4,500

Archived after 1 day
380 views
Sold (amount private)
Contributed to Pinside
Machine - For Sale
As new - New out of box (first owner) “I am selling on consignment for a customer a fully loaded HUO MI Pinball Refinery Aerosmith Pro for him. If you're interested in having an amazing machine in your collection PM, ca...”
2020-12-06
Muskegon, MI
6,395 (OBO)

Added 10 months ago:

Both machines are sold... Thanks everyone for the insterest.

#6677 10 months ago
Quoted from TheLaw:

Pretty. How does it play with the thick Mylar?

It plays good and fast, but a little bit different than an old wooden playfield does, it's hard to explain, just a little different.

#6680 10 months ago
Quoted from TheLaw:

Nice. Fast and no hang-ups is the main thing

It plays fine.. no hang ups. Also I was informed that it's actually a polycarbonate sheet that’s cut out especially for that game instead of mylar. It's a lot thicker than mylar so there no way it will have any more wear issues.

#6684 10 months ago

Fathom new price is $4500... Great deal for this title.

PM me if you would like it,

Steve
Mi Pinball Refinery

1 month later
#6765 9 months ago

I am listing a very nice Mystery Castle for a customer of mine.....

PM me if you are interested in it,

Steve
MI Pinball Refinery

Archived after 8 days
1223 views
Sold (amount private)
Contributed to Pinside
Machine - For Sale
Fully shopped/refurbished “You do not see many of these machines for sale. The last one listed was about 2 years ago. So here is the info on it. I am selling a Mystery Castle on consignment for a customer. M...”
2021-01-15
Muskegon, MI
7,995 (OBO)

2 months later
#6972 6 months ago

I am going to be listing a Avenger IQ Premium shortly on the market place and wanted to offer it first on the Michigan thread. It has about $650.00 of upgrades done to it and only has 33 total life time plays on it, price is $7800.00...

This is a customer's machine and a consignment sale, so I am not interested in trades, just a cash deal .

If you are interested please PM me,

Steve
MI Pinball Refinery

4 weeks later
#7046 5 months ago

I have 3 machines for sale on consignment from a customer....
1) Avengers IQ LE with mods and Stern topper
2) Spiderman VE with low plays and ColorDMD
3) Fully restored, amazing looking, no spare expensive Addams Family

I'll be adding them to the market place soon

Steve
Mi Pinball Refinery

#7050 5 months ago
Quoted from Pinkitten:

If your client is looking for a very fast cash sale way under market value on the TAF, PM me! I’m ready.

Sorry.... This isn't going to happen . He knows what these machines are going for.

But thanks for asking,

Steve
MI Pinball Refinery

3 months later
#7372 59 days ago
Quoted from tfduda:

I picked one up from ABEL a few years back and recall that they had a bunch. I also picked up a few at a VFW show and had a glass shop make one years ago as well. I need a few now too but am hoping to find some either at VFW or PATZ.

I will have 5 or 6 sheets for sale of new pinball glass at PATZ in April, from new machines that customer upgraded to invisi-glass for $25.00 a sheet if you can wait that long . I will also have lots of other parts as well for sale there.

Steve
MI Pinball Refinery

3 weeks later
#7429 37 days ago

I just listed a very nice HUO Game of Thrones Pro for sale with some nice upgrades added to it.

Archived after 13 days
454 views
Sold for $ 5,200
Contributed to Pinside
Machine - For Sale
HUO - Documented (Home Used Only) “I am selling this very nice Game of Thrones Pro with some nicely done upgrades that have been added to it. The machine has just been shopped out, cleaned and waxed the playfield as...”
2021-09-14
Muskegon, MI
5,300 (OBO)

UPDATE: Sale is pending on this machine.

Steve
MI Pinball Refinery

#7431 37 days ago
Quoted from BradLinden:

Anyone in SE MI have standard playfield glass? Looking for two sheets. Called around to a few local glass shops but the prices seemed steep (over $50/sheet).

I am on the other side of the State (Muskegon area)... I have some new sheets (take offs) from new Stern machines that were upgraded to invisi-glass for $25.00 a sheet. I think I have 5 new sheets available.

Let me know if you are insterested in getting them,

Steve
MI Pinball Refinery

You're currently viewing posts by Pinsider hemiorange09.
Click here to go back to viewing the entire thread.

Hey there! Got a moment?

Great to see you're enjoying Pinside! Did you know Pinside is able to run thanks to donations from our visitors? Please donate to Pinside, support the site and get anext to your username to show for it! Donate to Pinside