(Topic ID: 188322)

What game are you working on right now?


By Dayhuff

2 years ago



Topic Stats

  • 61 posts
  • 41 Pinsiders participating
  • Latest reply 1 year ago by Skypilot
  • Topic is favorited by 5 Pinsiders

You

Linked Games

No games have been linked to this topic.

    Topic Gallery

    There have been 91 images uploaded to this topic. (View topic image gallery).

    IMG_0842 (resized).JPG
    IMG_0839 (resized).JPG
    IMG_0838 (resized).JPG
    IMG_2193 (resized).JPG
    10949754_10152498749587271_851038475_n (resized).jpeg
    IMG_0158 (resized).JPG
    IMG_0157 (resized).JPG
    IMG_0156 (resized).JPG
    IMG_0155 (resized).JPG
    IMG_3257 (resized).JPG
    IMG_3256 (resized).JPG
    IMG_1654 (resized).JPG
    IMG_3253 (resized).PNG
    IMG_0292 (resized).JPG
    IMG_0291 (resized).JPG
    IMG_0286 (resized).JPG

    There are 61 posts in this topic. You are on page 1 of 2.
    #1 2 years ago

    Just rolled my Iron Maiden game into the shop that I've had for almost 16 years. It's always been in the line up with the other games but I never shopped it out (yeah I'm a little behind on things). I've bought new rubbers, drop targets, post nuts...etc. Plus I'll be replacing all the light sockets and who knows what else once I really get into it. So it got me thinking, what games are you guys working on right now?

    John

    IMG_0003 (resized).JPG

    IMG_0006 (resized).JPG

    #2 2 years ago

    Great topic! I just picked up this sorcerer for a song. It's pretty rough right now though. I have it functioning and playable after a few days of work. We have a tournament at my place later this month, then after that I'll be tearing it down for a full on restoration.

    IMG_20170503_213001 (resized).jpg

    #3 2 years ago

    Im working on This Mars Trek I picked up in a garage sale yesterday for $500. Its pretty clean. All the damn bulbs are burnt but the rubbers were fine. Go figure?

    IMG_1490 (resized).JPG

    IMG_1500 (resized).JPG

    IMG_1499 (resized).JPG

    IMG_1501 (resized).JPG

    IMG_1503 (resized).JPG

    IMG_1506 (resized).JPG

    IMG_1507 (resized).JPG

    #4 2 years ago

    Two in the shop. Xenon's done

    IMG_1786 (resized).JPG

    IMG_1812 (resized).JPG

    #5 2 years ago

    Working on my Banzai run for a couple of weeks trying to get it playing again. Game was pulled apart and sat in a storage building a long time before I purchased it. Complete playfield teardown and one hell of a cleaning. Looking good now with a Lot of the electronics repaired, still have a long way to go though.

    0501172111c (resized).jpg

    0501172111a (resized).jpg

    0501172111 (resized).jpg

    0422171730a (resized).jpg

    0421171251 (resized).jpg

    #6 2 years ago

    Just got an Addams and gonna start tearing into it this weekend. Sat in a non pinball person's house. Really nice cab. Playfield has some insert wear in the typical places but in general a really nice looking game. All plastics are clear and intact without even a crack. Original board are in great shape. They did have some batteries starting to leak however the corrosion was not even on the battery holder, just the batteries. Still removed it and replaced for good measure.
    I am on the CPR list however I am not sure if it is even worth doing the swap.

    #7 2 years ago

    AFM total restoration.

    #8 2 years ago

    Just broke down my Johnny for new cab decals and possible powder coating...

    20170502_131851 (resized).jpg

    #9 2 years ago

    Cureently I'm doing a full restoration on my No Fear.

    #10 2 years ago

    Working on my $100 Seawitch project. After doing all the board upgrades, adding NVRAM, totally rebuilding rectifier board, & repinnning ALL Molex connectors (male & female) I turned it on for the first time this morning.
    IT LIVES!
    Now to attack playfield & replace light sockets and fix sketchy mechanicals...

    IMG_0923 (Medium) (resized).JPGIMG_0946 (Medium) (resized).JPG

    #11 2 years ago

    I'm finishing up my EATPM restoration. Cab decals repaired, electronics repaired, clearcoated restored playfield new ramps and plastics

    IMG_0887 (resized).JPG

    #12 2 years ago

    It was missing all the boards and quite a few important mechanisms so i have slowly been finding what i need to get her working again!

    20160810_160907 (resized).jpg

    20160804_170046 (resized).jpg

    20160802_125208 (resized).jpg

    #13 2 years ago

    Pinball Magic ... Complete teardown and repair ... Don't know what was on the playfield as you couldn't even slide a finger across it! Lots of lovin and she's like a sheet of glass!

    image (resized).jpeg

    image (resized).jpeg

    image (resized).jpeg

    #14 2 years ago

    I just finished a WH2O complete top-side teardown/cleaning/mega-shop with new ramps, plastics, etc. It turned out great! Next up is either Getaway or Williams Joust. I'm excited about both projects!

    image (resized).jpeg
    image (resized).jpeg
    image (resized).jpeg
    image (resized).jpeg

    #15 2 years ago

    Dr Who
    Addams
    World Cup Soccer

    Are all in various states of repair/restoration.

    I need to just pick one and focus on it.

    #16 2 years ago

    thankfully I have nothing to work on.

    but I don't know if that's a good thing

    but I'm kinda too busy all the time

    #17 2 years ago

    Been sitting on a Stern Nugent that needs some attention. Will get on it soon.........

    #18 2 years ago

    I need to do a full pop bumper rebuild on TOTAN. That's next up for me.

    #19 2 years ago
    Quoted from timtim:

    thankfully I have nothing to work on.
    but I don't know if that's a good thing
    but I'm kinda too busy all the time

    Same! All pins and vids working great for once. Time to start working on some beer and enjoy...

    #20 2 years ago

    Paragon cabinet swap. The cabinet is pretty bad and we broke the head bottom board completely loose rolling it out at the end of PATZ.

    #21 2 years ago

    The game my dad had working in the 80's when I was a kid. Then it sat in my brothers garage 25 to 30 years until I rescued it from him. Still needs a lot of work, but its getting there. Got a new backglass from BGresto and I'm almost done shopping the top of the playfield. Not a full restore but just clean and get it working again is my goal. My dad passed in 2011 so I'm thinking about him as I work on it.

    20170417_125249 (resized).jpg
    20170506_225934 (resized).jpg

    #22 2 years ago

    Having the lolly pop rails and bolts, lock down bar, legs, and hinges being chromed for my ST Pro. Already have a chrome apron with triangle cut outs with blue light up inserts and chrome shooter housing.

    #23 2 years ago

    Meteor I have been working on for a few weeks. Thanks again Miamiredskin

    IMG_5137 (resized).JPG

    IMG_5139 (resized).JPG

    IMG_5138 (resized).JPG

    IMG_5246 (resized).JPG

    IMG_5330 (resized).JPG

    IMG_5348 (resized).JPG

    IMG_5356 (resized).JPG

    2 weeks later
    #24 2 years ago
    Quoted from cosmokramer:

    Just broke down my Johnny for new cab decals and possible powder coating...

    20170428_075126 (resized).jpg

    20170520_205611 (resized).jpg

    20170520_205709 (resized).jpg

    #25 2 years ago

    Next up...

    20170521_112122 (resized).jpg

    #26 2 years ago

    It really isn't far the before and after pictures there. It really oversights how difficult a job that is, and the work you put in - that is simply amazing.

    As for me, I am doing my AFM. We did a whole playfield teardown to have the original PF clearcoated, only for the clearcoat to fail and unadhere after 1 month. Now, I have a new Mirco PF ready; just have to find time between my Masters degree and my job active duty AF.

    *sigh* Someday...!

    #27 2 years ago

    I like that price card john!
    Cool color and font.

    Charles with a Banzai Run nice!

    I got nothing right now.

    Always wanted a Nugent I would be modding the hell out of that. Adding music and machine gun sounds.

    #28 2 years ago

    Thanks CNKay. I've barely touched the IM since rolling it in the shop I'm ashamed to say. Just been too busy with other stuff but I plan on diving back in very soon and I'll try to post some updates along the way.

    John

    #29 2 years ago

    Currently trying to get these two working. Freedom had some battery damage but after cleaning and replacing them I still have nothing on power up. HH fried a coil when I first powered it up but now it just flashes sevens on all the displays.

    20170216_184858 (resized).jpeg

    20170216_184848 (resized).jpeg

    #30 2 years ago

    Fixing a trashed(but playable)Adams family,my work here is correcting all errors and put it to play.Owner do the cleaning and cosmetic thing.
    After that I have to do the same with a
    BSD
    IJ
    RS
    Mario

    #31 2 years ago

    Bally Playboy is in shop in a million pieces as I do a very long term repaint of a lot of the playfield.

    Also have a Gottlieb King Pin in the shop and have cabinet and head cleared to save existing paint and working on redo for some sections. Playfield is very very good. Will eventually clear but this will be easy and fun.

    Here is where I was at on the redo of the PB playfield. I am further along now and have to finish white on lower 1/3 then hit a few blue segments (mostly lower 1/3). Moving slowly but progress has been made.

    IMG_0638 (resized).JPG

    IMG_0649 (resized).JPG

    #32 2 years ago

    Got me a Silverball Mania. Tear-down to begin this very weekend.
    Already upgraded the electronics, even though it worked when I got it, unlike my last two.

    IMG_6154 (resized).JPG

    SDU (resized).JPG

    IMG_6200 (resized).JPG

    IMG_6392 (resized).JPG

    Sound board (resized).JPG

    IMG_6387 (resized).JPG

    1 month later
    #33 2 years ago

    I've made some progress on the IM but each time I want to work on it Floyd is taking a cat nap on it. O'well he's my boy so he can do whatever he wants.

    John

    IMG_0098 (3) (resized).JPG

    #34 2 years ago
    Quoted from Dayhuff:

    I've made some progress on the IM but each time I want to work on it Floyd is taking a cat nap on it. O'well he's my boy so he can do whatever he wants.
    John

    Go turn on the can opener. That will do it.

    #35 2 years ago

    Just waiting on a few coin door parts from Steve at PBR and this will be ready to fire up. Or catch on fire.

    And PS...yes, I know I still have to clean the apron up a bit!

    20170626_124159 (resized).jpg

    #36 2 years ago

    Got new maple rails, stainless regrained and installed. New flippers mounted. Cooked cool replaced. Trough parts installed.

    IMG_3110 (resized).JPG

    #37 2 years ago

    I'm working on Getaway that I have owned for way too many years and never even powered it on... It's one of my favorite games and I am going to make it play really fast.

    IMG_6310 (resized).JPG

    IMG_6328 (resized).JPG

    #38 2 years ago

    Twin F2Ks almost complete. Major shop on the first, and the second is getting a shiny new repro pf. Next up is a pf swap on Centaur then bringing a dead Gorgar back to life.

    IMG_0096 (resized).JPG
    IMG_0095 (resized).JPG

    #39 2 years ago

    Doing my first swap on TAF. Putting in a restored original that HEP did an amazing job on.

    IMG_0591 (resized).JPG

    IMG_0613 (resized).JPG

    IMG_0611 (resized).JPG

    IMG_0618 (resized).JPG

    3 weeks later
    #40 1 year ago

    Making some progress but Floyd still has different plans.

    John

    IMG_0111 (resized).JPG

    #41 1 year ago

    Finished my TAF! I’ll do a full thread but here’s the end result:

    IMG_0739 (resized).JPG

    #42 1 year ago

    Started on my Nugent. New MPU on the way. Has sound issues last I remember. Will be interesting. Will need a lockdown bar and correct sized legs. Probably a few displays too.

    #43 1 year ago

    Since you asked. I've been thru every machine I've acquired top to bottom since I picked this one up a year or so ago, and now it's time to hunker down and git her done.

    It's either saving the best for last or I knew it would be a real bear to pop out all those sunken inserts without breaking them. All it took was 105 degree day and taking it outside in the sun to make it an easy venture.

    DSCN5474 (resized).JPG

    DSCN5475 (resized).JPG

    1 week later
    #44 1 year ago

    FINALLY I've been making some serious headway on the IM game. Now it's been nearly three months since I first rolled it in the shop and tomorrow I'll be doing more play testing and if it all still seems good I can get the plastics put back on along with new shiney speed nuts from PBR. I replaced every single feature and GI socket and bulb on the playfield. Its nice to see all those lights working like they should and I'll never have to worry about them again.

    John

    IMG_0258 (resized).JPG

    #45 1 year ago

    We're in our new house since June and I now have a basement with room to set up and work on all the games I had to keep up on end in my former apartment's dining room. So, I'm finally setting up, cleaning, and tweaking Black Knight and Pinbot for the first time, will be repopulating Earthshaker and Space Invaders, and eventually have a Centaur playfield swap to tackle.

    #46 1 year ago

    I have been working on a Bad Cats, RBION and a class of 1812. It has been a busy month.

    0724172336b (resized).jpg

    0708170859 (resized).jpg

    0613171121a (resized).jpg

    #47 1 year ago

    During the Summer months, I'm outdoors pretty much
    non stop, but for the rainy days, I took the worst Fun
    Park that I had (close to a parts machine), and going
    through it top to bottom. Having a (very) parts Funland,
    encouraged my decidtion to save the Fun Park..

    IMG_0881 (resized).JPG

    #48 1 year ago

    I tell you what, the IM game was a HUGE pain to get done with three months invested in it. Of course Floyd didn't have anything to do with that......LOL. Even with it FINALLY finished he just couldn't stay off it. IMG_0286 (resized).JPG But anyways I'm proud to say that the game is done and it's back in the line up where it belongs and will stay forever. It turned out better in some ways then I thought it would. This example is by no means in perfect condition but what beautiful artwork Parkinson did on this game (and Viper too), it's just too bad Stern couldn't do something this good today. Enjoy the last of the pics while I try to find my workbench again.

    John
    IMG_0291 (resized).JPG
    IMG_0292 (resized).JPG

    #49 1 year ago
    Quoted from Dayhuff:

    , it's just too bad Stern couldn't do something this good today.

    Ain't that the truth.
    Just finishing up my Classic Stern Seawitch project & it's a damn fun player.

    #50 1 year ago

    Is that a em phone?

    IMG_3253 (resized).PNG

    Promoted items from the Pinside Marketplace
    $ 18.99
    Eproms
    Matt's Basement Arcade
    $ 7,599.00
    Pinball Machine
    Operation Pinball
    From: $ 200.00
    Playfield - Toys/Add-ons
    CzTV Mods
    $ 8,999.00
    Pinball Machine
    Nitro Pinball Shop
    $ 34.00
    Playfield - Toys/Add-ons
    The MOD Couple
    From: $ 5,799.00
    Pinball Machine
    Great American Pinball
    $ 69.99
    Playfield - Toys/Add-ons
    Lighted Pinball Mods
    From: $ 9.99
    Eproms
    Matt's Basement Arcade
    From: $ 99.99
    Cabinet - Other
    Lighted Pinball Mods
    $ 29.99
    Cabinet - Sound/Speakers
    Lighted Pinball Mods
    $ 9.99
    Eproms
    Matt's Basement Arcade
    $ 48.00
    Cabinet - Other
    ModFather Pinball Mods
    From: $ 9.99
    Eproms
    Matt's Basement Arcade
    $ 27.99
    Eproms
    Matt's Basement Arcade
    $ 89.99
    Lighting - Led
    Lighted Pinball Mods
    $ 229.99
    Lighting - Other
    Lighted Pinball Mods
    $ 7,499.00
    Pinball Machine
    Little Shop Of Games
    $ 9,999.99
    Pinball Machine
    Little Shop Of Games
    $ 69.99
    Lighting - Led
    PinballBulbs
    $ 9.95
    Playfield - Toys/Add-ons
    pinballmod
    From: $ 42.00
    Cabinet - Shooter Rods
    ModFather Pinball Mods
    $ 7,499.00
    Pinball Machine
    Operation Pinball
    $ 8,500.00
    From: $ 175.00
    Gameroom - Decorations
    Pinball Photos
    There are 61 posts in this topic. You are on page 1 of 2.

    Hey there! Got a moment?

    Great to see you're enjoying Pinside! Did you know Pinside is able to run thanks to donations from our visitors? Please donate to Pinside, support the site and get anext to your username to show for it! Donate to Pinside