Light year for me..... bought a Trident PF partially populated for $75.... Got a Stern Coin door for $25 mostly for the coin entry plate, rest of door was junk. Bought a Stern Wild Fyre BG for a Wall hanger & 3 sheets of PF glass.

I could only go Saturday, so pickings were slim. I had told myself I was not buying a Machine this year (I bought 5 last year) so I intentionally drove a vehicle that couldn't haul one LOL. Probably a mistake.... I really didn't think there would be anything decent left by Saturday & I did spy Flight 2000 Project for $850 that I would have probably come home with if I had a vehicle to haul it in. Also not sure exactly what was up with the $850 Magic that was pulled out of Free play & back in swap meet room after about 11AM on Saturday.... could never hook up with seller, I assume it was still for sale, not sure.

Sold a PF & a BG to a couple of Pinsiders in the parking lot, so I ended up coming home with more $ than I spent, which never happens.

Isochronic_Frost was looking for a classic stern door hinge--any chance your door had one that you would be willing to part with?

The display tester works great. Still trying to figure out the lamp board tester.

Set it to auto, and it should cycle through each bulb one at a time. Also keep in mind that there are incandescent bulbs behind the backglass, so it's possible a few might be burnt out, just like on a pin.

Also check the fuses and fuse holders inside the unit. The original fuse holders weren't great, and lose tension and break fairly easily. I replaced them on my testers.

No hinge... was just the door skin, with 2 coin entry plate & very minor coin mech parts left on the back. $25 just for the entry plate, but classic Stern stuff does'nt grow on trees. Gotta buy it when you can find it. This entry plate is just slightly better than the worst one I have, which it will replace.

40 sheets of glass? That sh!t's heavy!

Yes indeed! Around 600lbs heavy. Have it down to a science though so none will scratch each other and travel safe for the 5hr ride home in the SUV if I happen to have to stop short.

Cash

Meat Sticks from the Farmers Market.

$65 and a couple parts machines plus 3 junk playfield I bought in the parking lot. After everyone got "theirs" and a put the money back into the bank I pulled out to buy that warehouse deal the final count was $65 for me. The crazy thing is Sunday May 5th was my 65th birthday I never even thought about it until my daughter-in-law said something. So I got $65 for my 65th birthday!

Picked up a heavy project Pinbot and a pinbot parts machine. Overpaid, but going to have a little fun bringing a functioning pinbot back into the world.

ac4402f2ba5358edfb4d0f2bc737c689d97db3ef (resized).jpg

I had a nice Pro with a bunch of mods in our booth for sale. Still available if you're interested.

I didn't get to wander out of the booth too often but I did pick up some side blades for pirates, flipper rubber, couple of Shaker Motors in a flea market area, mirror blades, ordered a GB topper from Cointaker and some odds and end parts that I didn't really need but couldn't pass up..

11 playfeilds for wall hangers, half were populated but I stripped them and put the parts into the clear bins in the hotel room.
Tons of classic stern parts, drop target, popbumper and flipper mechs, plus all the parts off a populated dracula and trident playfeild.
Classic stern widebody lockbar, 2 classic stern coin doors.
Color dmd,future spa hardtop, rivet clamp, used rotisserie, 9 sets of reese rails, 3 nos classic stern backglasses, used centigrade backglass, 5 used 7digit displays, couple used mpu200s, 6 gatecrasher lift channels and trim, Marco order plus some other stuff I'm sure I'm forgetting.

20190505_174058 (resized).jpg

20190505_174107 (resized).jpg

20190505_174151 (resized).jpg

20190505_174156 (resized).jpg

20190505_174210 (resized).jpg

20190505_174218 (resized).jpg

20190505_174226 (resized).jpg

20190505_174245 (resized).jpg

20190505_174300 (resized).jpg

20190505_174304 (resized).jpg

I need some testing done

Love it!

Had to replace a pop ring, reflow a couple displays, and still need to replace some light sockets. Plays great.

DF71B51C-4712-47EC-83A0-B61EA13B35FE (resized).jpeg

EF546EAD-3350-496C-B3AE-084468ACC1E0 (resized).jpeg

A3E30CBB-FF8F-43B2-AE52-AD3042B06176 (resized).jpeg

BG and PF artwork looks great, glad it plays sweet and you love it!

1960 Gottlieb Wagon Train, 1977 Team One. DVD’s, shirts, bar wares.

Pinball signage?? Do share!!

John

Beautiful Fish Tales

8343A671-DBE4-4D7B-BED8-22DF6982CF60 (resized).jpeg

Who bought the Playmatic New World? If you ever want to sell it, please let me know.

Nice! Sell it to me when you grow tired of it.
Yeah right!

This one is chained to the floor next to my taxi.

Something about pinbot. It's damn hard and epitomizes the "one more game" thing well. And it's incredibly frustrating, which I love. I get so angry playing it with the outlanes and all.

Amazing pinball machine.

I hear ya. Hope to get one some day. Enjoy!!

Brought home a Freddy Nightmare on Elm street in need of some love. Two sheets of glass, LED kit for one of my pins, a new speaker for my Addams family, couple shirts