Just finished my first playfield swap. Special thanks to Ken for encouragement and a few special tips. Sorry I didn’t take more detailed pics.

022A16E9-DAC2-4D0B-BD3F-93FC7FF01996 (resized).jpeg

0C1AED97-1C36-4E2A-9911-768540D98C91 (resized).jpeg

2262781E-F3EE-4432-8974-A05591498002 (resized).jpeg

07850638-3575-45FB-95F6-F1293ACAC37A (resized).jpeg

C2D6D608-D3A6-44E3-8C36-BB24C01CBBE3 (resized).jpeg

B1E8C68B-1712-4207-B736-94BADEDA0D02 (resized).jpeg

2D02946A-6D7E-4804-97C4-AD7B980C8934 (resized).jpeg

Having a little trouble getting the score motor going

D7C7314F-888D-45C4-9230-0058A08BB601 (resized).jpeg

When I lose a tool All I have to do is stop looking for it and start cleaning up and it shows up.

When the spin pulse unit is running correctly it really adds to the game.

Mine was blank also.

They are hard to find!!
I have heard of them going for $140 plus.

Dan Marino’s advice is solid I only thought he threw footballs. First thing I would do is clean and adjust the the EOS switches. I regularly re-sleeve flippers and pop bumpers, but when you change the coil sleeves you do half the labor it takes to rebuild the flippers. If you have $40 I would order a rebuild kit and rebuild them if it hasn’t been done. Just my 2 cents.

7227 (resized).jpeg

Thanks Royal Flush

1855 (resized).jpeg

1873 (resized).jpeg

Picked this up a few weeks ago hadn’t ran for years, 13k on the play meter. Finally got it running 95% then did mechanical referb and playfield tear down clean and wax. Currently putting it back together hoping to have it up and running Wednesday if I get the time. Thanks Tryg for advising to get it running before the tear down.

IMG_1199 (resized).jpegIMG_1198 (resized).jpegIMG_1195 (resized).jpeg

Going back together.

IMG_1231 (resized).jpeg

IMG_1218 (resized).jpeg

IMG_1232 (resized).jpeg

Ok turned the top three skirts around thanks for the catch on that.

IMG_1233 (resized).jpeg

I probably played 20 games but ran it many times getting the goal animation working adjusted and running. I still may tear the animation unit down and do a complete clean.

Ready to come off the rotisserie.

IMG_1235 (resized).jpeg

Was doing a little work on the tree yesterday. Not bad for a start.

IMG_1405 (resized).jpeg

When I did the Krause PF swap I found out that the flipper mech can be rotated 10% centered the flipper shafts and redrilled the screw holes, really was a painless way to take care of the problem.
Good luck enjoy the machine.