San Diego, CA
Update.
Sundance is sold.
Timber is on EBay.
More goodies soon.
(Topic ID: 118044)
Quoted from PACMAN:More goodies soon.
Crossbow or a Mad Planets? (:
I have a Red Baron upright (vector game) that I may sell. Hate to see this one go since I've never seen it emulated even close to how it is on the real machine.
Want mad planets, want discs of tron
Want my damn Nintendo row of games restored and slid into the row in my game room..
Want to sell spy hunter, and turbo outrun!
I'm thinking about getting a low end Golden Tee Golf (Fore or earlier) as my first dedicated arcade to go along side 3 pins and a 18000 in 1 arcade 1 up picade. Do you guys have any recommendations on where to get one other than Craigslist, facebook, or KLOV? Any advice on these in particular? Thanks!
Quoted from SantaEatsCheese:I'm thinking about getting a low end Golden Tee Golf (Fore or earlier) as my first dedicated arcade to go along side 3 pins and a 18000 in 1 arcade 1 up picade. Do you guys have any recommendations on where to get one other than Craigslist, facebook, or KLOV? Any advice on these in particular? Thanks!
Those are the places i'd start looking. There is GT buy/sell group on FB also.....
Need to make some room. Have a few arcade games I will be putting up for sale shortly.
Spy Hunter - $1600
Star Wars (1983) - Has ESB switcher - $2800
Paperboy - $3000
PM if interested.
Added over 4 years ago:All games have sold.
Some Pictures:
Spy Hunter: https://www.dropbox.com/sh/ggy513ansz2s2wg/AADakrHwrLjlP7HV3R2oOumOa?dl=0
Star Wars: https://www.dropbox.com/sh/1i3ikng7ntptp2c/AABU3ebSv6KSKbR0dNRYrUAja?dl=0
Paperboy: https://www.dropbox.com/sh/xpnn3f7xibx6mha/AABGQA9-CBFrT10cLYa0mhcea?dl=0
Star Wars is pictured with the Alan-1 replacement yoke. I have an original yoke I can put back on.
Calgary, AB
Quoted from Skyemont:Burgertime value?
Assuming it is fully working and no cab damage, decent shape overall:
$600-$1200
Nicer examples could fetch more.
Just finished this total tear down of a neo geo big red. Came out nice, powder coated the control panel, pcb cage and coin door. New art, monitor overhaul.
8B6F00A4-8353-401A-8381-F304FDF0EF91 (resized).jpeg049A4B5A-59F9-4282-92C9-ACB67BC6BD2F (resized).jpegF1F5DA9D-CECC-4E46-BCB0-51CDF2DDB196 (resized).jpeg4A2BC54D-4514-4481-A260-18A65B9150AA (resized).jpeg 1 week later
Ms Pacman Cocktail and Upright for sale. Combo package deal. Cocktail works, upright does not come on. I have not looked into it and dont have time. $1,100 takes both. The upright needs a new bezel and back door is warped. Everything else is good. Located in Midlothian, VA. PM me with questions.
20191005_092228 (resized).jpg20191007_171317 (resized).jpg 1 week later
Quoted from Phat_Jay:Just paid for this little gem, it will be at expo! Thanks tony and to Andy for delivering to expo![quoted image]
Nice! I was wondering if that was the one Tony had for sale. You sure don't see them too often!
Chris
Quoted from SilverUnicorn:Nice! I was wondering if that was the one Tony had for sale. You sure don't see them too often!
Chris
Yes, the same. Couple more days and I’ll be playing it at expo!
Also, now that I have a cabaret, I have an extra Glass monitor bezel And populated control panel for the full size upright for sale. I can bring along to expo if anybody needs it.
Just finished a restore on my Qbert. It is a really early one. The hang tags inside the game all say "sample test". Sadly someone butchered it by painting it with the same color paint as the lines in the street. Had to remove all of that and start over. It came out pretty good.
20191005_100909 (resized).jpg20191015_154917 (resized).jpgQuoted from Mad_Dog_Coin_Op:Just finished a restore on my Qbert. It is a really early one. The hang tags inside the game all say "sample test". Sadly someone butchered it by painting it with the same color paint as the lines in the street. Had to remove all of that and start over. It came out pretty good.[quoted image][quoted image]
I had a Qbert a few years back that was an operator conversion to 1942.
Most of the original Qbert harness was still inside and had been hacked in the conversation.
It had a couple paper tags hanging off the harness that said the same thing.
My buddy Phil has the cabinet now and is converting it back to Qbert.
Anyhow, I was doing some research and it seems that they put test machines out at specific locations before they actually put these into mass production.
They put them out at specific location and had people taking notes on the players reaction to try to gauge if the machine would be a success or not.
Apparently they even did this in some locations where there were people watching from behind a two way mirror so the players did not know they were being observed.
Quoted from Coindork:I had a Qbert a few years back that was an operator conversion to 1942.
Most of the original Qbert harness was still inside and had been hacked in the conversation.
It had a couple paper tags hanging off the harness that said the same thing.
My buddy Phil has the cabinet now and is converting it back to Qbert.
Anyhow, I was doing some research and it seems that they put test machines out at specific locations before they actually put these into mass production.
They put them out at specific location and had people taking notes on the players reaction to try to gauge if the machine would be a success or not.
Apparently they even did this in some locations where there were people watching from behind a two way mirror so the players did not know they were being observed.
That is interesting and makes a lot of sense. I'm glad all the boards were left in my game. All the serial numbers match and they are all rev 01 boards.
Tetris going on location tomorrow...
20191017_212956 (resized).jpg
Added over 4 years ago: DUDE! This game has earned so far more than it eeeeever has any other place on location!
Hey guys, i'm moving on from Pinside for my arcade art and restoration stuff.
You will be able to find me here:
https://www.facebook.com/lostarcade/?view_public_for=2070619203248630
Going to have a ridiculous amount of content, pix, info, events, etc.
Quoted from PACMAN:Hey guys, i'm moving on from Pinside for my arcade art and restoration stuff.
You will be able to find me here:
https://www.facebook.com/lostarcade/?view_public_for=2070619203248630
Going to have a ridiculous amount of content, pix, info, events, etc.
No way!!! We will miss you here bud... I will hop over to FB to hang out 
Quoted from PACMAN:Hey guys, i'm moving on from Pinside for my arcade art and restoration stuff.
You will be able to find me here:
https://www.facebook.com/lostarcade/?view_public_for=2070619203248630
Going to have a ridiculous amount of content, pix, info, events, etc.
"Following". Dang, miss your nice pics here. No high res on Facebook.
Quoted from PACMAN:You will be able to find me here:
https://www.facebook.com/lostarcade/?view_public_for=2070619203248630
Thanks PACMAN... enjoyed all the great vid posts.
I want a Mad Planets.
Hi there! I just got a Time Crisis 2 Deluxe 50" dual game. And everything was fine, until about 10 minutes. After that the right monitor lost the game's signal. And I can't find out how to start the checking. Can anyone help me, or tell me a place where I can find a specialist who will answer me? The red lines are other problem with a game panel, and will be replaced.
Thanks!
20191019_165506 (resized).jpg 1 week later
Quoted from pycur:Hi there! I just got a Time Crisis 2 Deluxe 50" dual game. And everything was fine, until about 10 minutes. After that the right monitor lost the game's signal. And I can't find out how to start the checking. Can anyone help me, or tell me a place where I can find a specialist who will answer me? The red lines are other problem with a game panel, and will be replaced.
Thanks![quoted image]
You need to go to the Klov forums, they have really good experts there that can help
Have had some good luck posting here in this thread in the past, so figured I would post again. Anyone have an original Bubbles upright that they would consider selling? I still have a Sinistar cockpit that I could trade toward/for the Bubbles, or I would buy the Bubbles outright. Thanks.
Quoted from pycur:Hi there! I just got a Time Crisis 2 Deluxe 50" dual game. And everything was fine, until about 10 minutes. After that the right monitor lost the game's signal. And I can't find out how to start the checking. Can anyone help me, or tell me a place where I can find a specialist who will answer me? The red lines are other problem with a game panel, and will be replaced.
Thanks![quoted image]
I had one of these for a while.
The monitors are nothing more than rear projection TVs. In fact if one of them ever goes completely out, a rear projection TV is a drop in replacement.
I would start with checking you connections and see if you have a lose cable somewhere.
Quoted from eb94114:Have had some good luck posting here in this thread in the past, so figured I would post again. Anyone have an original Bubbles upright that they would consider selling? I still have a Sinistar cockpit that I could trade toward/for the Bubbles, or I would buy the Bubbles outright. Thanks.
Underrated game, good luck!
Im searching for an Aliens armageddon machine, not the deluxe version but with fixed guns. Is there something of a marketplace in usa where this is offered? Secondhand ofcourse 
Quoted from Fulltilt:Is the Tempest multi game still available? Loved that. It was so cool.
You mean Tempest Tubes? I don't know.
Quoted from MustangPaul:You mean Tempest Tubes? I don't know.
No, it was a multi-game add-on. Many variants on the Tempest theme, menu selected.
Reply
Wanna join the discussion? Please sign in to reply to this topic.
Hey there! Welcome to Pinside!
Donate to PinsideGreat to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
