Hi,guys
I'm repairing a Whitewater pin,repaired most problems but all controlled lamps won't work,gi's are fine
Some input will be appreciated
Thanks

Ok
Another idea?

Fuses checked,CPU board is perfect
Every other thing works good

Yes I did it,I used the getaway CPU on wh2o with the same results,so problem maybe is power driver or something else?

Associate fuse is 114 I change it,and inspect the other ones using my meter,I will swapp ribbons tomorrow to see if this is the problem.
Will buy a logic probe to check more inside this problem

Ok guys,working early here
Problem is,lack of 18 v
Check ribbons with no luck
Gonna check br1 because this bridge is different to the others
Something else?
F 114 is ok

Fixed
Change br1 and br2 and 18 v came back
Problem was pin never credit error relative to this
Thanks