White Water
Williams, 1993You're currently viewing posts by Pinsider seshpilot.
Click here to go back to viewing the entire thread.
The upper flipper on my WH20 does not quite seem to make the upper ramp around to the Whirlpool (it goes to Insanity Falls just fine). It will go about 1 in every 6-7 attempts, which to me seems a bit off. Any advice? I'm wondering if the EOS switch needs to be adjusted. The flipper, rubber, solenoid, spring, sleeve, EOS switch, and plunger are all new. I didn't try it before this was all replaced FYI.
Other than this, the game plays great.
Okay well taking the Boulders off was smart. It's hitting the switch back there and ricocheting right back down. The ramp sends the ball right at that switch. Any ideas? Loosen screws to switch?
You're currently viewing posts by Pinsider seshpilot.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/wh20-upper-flipper-help-whitewater?tu=seshpilot and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Asheville, NC