Need the graphic , than I might make some.

That would be amazing. I could try to pull mine off And get a scan of it but it has a crack so I’m not sure how you can digitally correct it? Or maybe it won’t show up.

We can try !

For the surviving aliens out there I got it out! Thinking Kinko’s or somebody has a scanner I’ll check them today. You can see where the crack is on the right side.

85240633-AC23-43DE-82E1-54FBCDBB10C0 (resized).jpeg

AD43E980-271F-40F7-9287-BD90D95EC580 (resized).jpeg

Could someone provide me with the link to the recommended cables to buy to connect to i/o boards? I’ve searched the Alien posts and just cannot find it.

Thanks Michael

https://pinside.com/pinball/forum/topic/heighway-pinball-support-full-throttle-and-alien/page/14#post-4552153

with this inside:
amazon.com link »

Were the boards ever produced for the jaw/tongue? Is there a guide to convert from a single board to 2 board config? My friend has this game and trying to fix the xeno jaw right now and figured if we have to do major work should do it right. Not even sure if he has a single board version but I know he at least wants spares of certain parts and I assume this is one of them.

Short answer: yes

Long answer: The one motor controller board is(was) available on eBay, and the other Arduino based board was ordered from the OEM manufacture in small quantity. The newer wiring harnesses have to be made from hand, the Xeno head itself needs to be the newer design, which means trying to source one of those too. It's a complicated upgrade beyond just sourcing the parts, and you'll need a reference game, experience programming Arduino's, etc.

The Xenomorph covers (upper and lower) are the same. I swapped them. But the "insight" is different but new Xenos V2 are available in shops.

Anyone got the specs for the 12v power amp (or rather the speakers)? The tweeter section of mine stopped working and im going to replace it with a better one from GAS (Great American Sound) or something. Car amplifier anyone?

Need to know the impedance.

Thanx

(I measured them myself,

the tweeters are 8 Ohm and the sub is 4 Ohm.)