Got the topper installed today. I like it. For others assistance, I did have to reinstall 1.0.1 as the topper was acting quite strange in that only a portion of the lights were lit and never animated and sometimes no lights at all. Reinstalling worked. Figured I’d at least post despite the hate in case others run into the same issue.

Cheers

B25F64AE-F905-465C-84B0-D8921B970346 (resized).jpeg

Thanks! I couldn't find an LE like I wanted so I settled on a premium. In the end it turned out I like it even more than the LE version now The burnt orange powder is awesome.

Roughly 7 5/8"

Put a little upwards pressure on it from under the playfield as you unthread it. Once the thread disappears into the playfield put a little upward pressure under the post from the top.

I use Robertstone0407 on here. He has a big thread with his work: https://pinside.com/pinball/forum/topic/powder-coating-services-offered

He does an awesome job and has great communication. Can't recommend him enough!

Anyone know if Cliffy is planning on making protectors for the raptor pen gate? I've noticed mine showing a bit of wear there.

Anyone have any video of how the ball is supposed to exit the right ramp wireform to the upper flipper? Mine exits and bounces quite a bit making that shot to the tower very difficult. I gotta imagine it should exit more cleanly.

Thanks! Was fumbling around searching and couldn’t find the right words to hit on the solution. I’ll give that a shot. Someone should make that a sticky topic!

Adjusted my upper right wireform today to feed the upper flipper more smoothly. What a different game this is now! Kind of a pain to adjust but now that the wireform exits much closer to the side rail it feeds it so smooth! No more bouncing or side to side deflections.

The right-most exit wire for me is just above the siderail, pretty much sitting atop it. I'd have to measure my exact drop though I didn't bend the end of it down towards the playfield any further.

In watching your videos it appears the auto plunger is offset to the right of center a bit. Could be camera angle or it may very well be offset a bit. Any amount of ball spin it might introduce has a chance to adversely affect it hitting that ramp.