You're currently viewing posts by Pinsider jmxdc.
Click here to go back to viewing the entire thread.
Quoted from Markharris2000:Refer to schematic, #520-6936-01 and they refer to the speaker connector as Molex 26-60-4020 for the cabinet speaker, and Molex 26-62-4056 for the backbox speakers.
Nice, thanks! I was digging through the manual but I did not see that.
Quoted from Markharris2000:Refer to schematic, #520-6936-01 and they refer to the speaker connector as Molex 26-60-4020 for the cabinet speaker, and Molex 26-62-4056 for the backbox speakers.
unfortunately those are the connections to the board.
Quoted from DugFreez:I'm going to throw my guesses out there. I have thought about buying some myself and possibly making them available with quick connects on the ends to slide on the speaker terminals for folks that are adding new speakers and are not soldering inclined. The bad part is...those molex connections were added who knows when...in any case, after SPIKE 2 games were already rolling out for a bit. So it would be a some SPIKE 2 games have them and some SPIKE 2 games don't scenario.
So here goes on my guesses (and this is for the backbox speakers):
speaker side
1 - 39012020 (2 Housings Receptacle)
2 - 39000039 (Female Crimp Terminal)
game side
1 - 39013023 (2 Housings Plug)
2 - 39000041 (Male Crimp Terminal)
Thanks, I rolled the dice and bought some that just happen to match the housing part you have listed and it worked. I wanted to be able to pull the speakers and put back the original if I decide to get rid of the game. that way I can keep your speakerlightkit for my next machine.
Speaker replacement to 5.25 without the need to solder.
2020-11-04 15_55_20-Photo - Google Photos (resized).png
Quoted from DugFreez:Yep....exactly what I was looking to possibly offer. As I mentioned, the only down side (really just an inconvenience on selling them) is that not all SPIKE 2 games have that molex speaker connection on them. I'm not sure when Stern started adding them and I'm sure some games probably vary from run to run.
Was the terminal part number correct also? I've never used any of the square terminals like that before. The info would be appreciated.
Yes the terminals were correct as well. The ones I ordered I found on Amazon https://www.amazon.com/dp/B074M1RZHX/ref=cm_sw_r_cp_apa_fabc_awkPFbJR0R853
I order some more of the whole set you posted just to validate the machine side. I bought a crimping tool so now I want to crimp everything lol. I don't mind soldering but crimping can be just as easy I wish most parts were put in with connectors like this.
Quoted from Royale-W-Cheese:Looking good. Nice trees. HA.
Thanks, I made those. I bought some model trees off Amazon for about $12 and then put a screws in the bottom and secured it to some picture hanger clips. Here is a better photo of the trees.
PXL_20201106_030054601 (resized).jpgQuoted from MLmotorsport:Got a link for the trees? Lots of options on Amazon but those look like they fit well.
https://www.amazon.com/dp/B07S23Q1WX/ref=cm_sw_r_cp_apa_fabc_0PkQFbTRRRT10
Lots of different sizes to use.
Quoted from Ponzie:Where did you get the light kit?
http://www.speakerlightkits.com/
I picked up the combo, it has the plate for 5.25.
Speakers from Amazon https://www.amazon.com/dp/B079SFC3P9/ref=cm_sw_r_cp_apa_fabc_-TkQFbGCWSZ2X
You're currently viewing posts by Pinsider jmxdc.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/welcome-to-the-jurassic-park-le-club?tu=jmxdc and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.