Going rate on a premium shipped to the house? PM is fine if not the type of info to be shared. Thanks!
You're currently viewing posts by Pinsider DudeRegular.
Click here to go back to viewing the entire thread.
Going rate on a premium shipped to the house? PM is fine if not the type of info to be shared. Thanks!
Quoted from Arcade:Got most of my game dialed in now thanks to this group.
One last thing that was concerning my family was the amount of ball hop for a ball coming back down the S lane from a weak shot or poor plunge.
I wondered if the ball guide could be pushed up some to stop this. Short answer is no. There is zero play in this guide.
While I had the plastics taken apart I noticed that the metal guide is so damn close to the post that it had cut through the black rubber ring. (Original Stern ring in photo.)
I replace this ring with a new one but it is already getting sliced open.
The only fix I can think of would be to throw out this rubber ring altogether and only put a single post rubber on the middle post.
Has anyone tried this yet or have a better idea?[quoted image]
I used some big pliers and put a slight bend on the guide. It now allows the silicone ring to not be sliced and it generally sends the ball the the flipper rather than the sling.
T-Rex multiball- How long does your dino hold onto the ball? Mine seems to be holding it longer. Ball save is nearly gone by the time the ball is dropped from the T-Rex mouth. I see there are some adjustments regarding ticks in the menu, but not sure that would impact this.
Quoted from TKDalumni:Probably a 5 second Dino hold time and then another 5 seconds or so before the ball save times out. I use that second ball to try for the C-shot and then H. If I miss, I let it drain until I hit it or have to move on.
Hmm ok. I sometimes can only get off one maybe two shots with the second before the ball saver times out.
Quoted from EaglePin:When I go into the menu and choose "Diag" (Diagnostics), "SW" (Switches), and then "ACT" (Active Switch Test) it scrolls through the switches that are currently active on the machine. One of the switches that reports as active in the test on mine is #67 for the mouth opto.
Any chance someone could check yours to see if #67 Mouth Opto is one of the switches it reports as active as it scrolls through the active switch test? Other switches it listed as active as it scrolled through them were the trough switches, #45 (motor 2), #31 (newton ball left), #25 (coin door interlock (door was open)), and the three flipper EOS switches. I'm wondering if it's normal for #67 to be showing as active in this test.
67 is not listed in the active switch test on my premium.
You're currently viewing posts by Pinsider DudeRegular.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/welcome-to-the-jurassic-park-le-club?tu=DudeRegular and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.