Hey folks, just joined the club a couple weeks ago and I have a couple of questions regarding the ringmaster.

What is the best way to remove the plastic head? Mine has 2 screws in the back of the ringmaster which I removed the other night. Once that was done, I wasn’t sure if I remove the head by prying apart the ringmaster, or pull up from the top to slide it off??? Kinda scared to pry too much as it seems to be very fragile. Any suggestions are appreciated.

Also is there only 1 light/bulb in the ringmaster head? Reason I ask is my rm seems to only light up on the right side of his face. I figured a bulb may be out, or the wiring is pushed to 1 side.

One other question....why is the prototype ringmaster so much more than the other(I’m assuming) more common one???
Is it that much more desirable???

Again appreciate the suggestions/advice in advance and I’m SO thrilled to finally be in the CV club.

Thanks for the quick reply everyone.

Looking for any good suggestions for a backglass lift channel for my CV....my current one has the plastic one which has cracked unfortunately. Was hoping for a metal solution but with the backglass on CV being so unusual, not sure of what options are out there.