Cirqus Voltaire
Bally, 1997You're currently viewing posts by Pinsider Lostcause.
Click here to go back to viewing the entire thread.
Had mine a for a good few months now, such a beautiful game. Had a new cab/decals by the best guy in the
uk (Manny). Color led display, PinSound & speakers, Afterglow which a German version of led ocd.
Has metal rings around the upper volts roll overs so cannot wear. Never seen that on another one.
19A3E431-DCAC-42CA-B38E-5A5C01F1732C (resized).jpegB268BFD0-65B2-4004-A4C7-9E27FE957E24 (resized).jpegD8848BFE-2B9E-4E93-899A-5BC3C434936F (resized).jpegQuoted from Phantasize:Do you have any more info about this? Perhaps even a link?
Hi, they were designed and sold buy a guy on a German forum. You had to put your name down at the time and no more have been made yet.
He is working on a gi version too. I bought 4, wish I had bought 10 as they were about €35.
Quoted from jasonbar:Anybody have a spare 04-10253-1? The bracket that holds the blue rubber block to the right of the ringmaster.
They seem to be unavailable anywhere.
My machine has the mirror image part, 04-10253. This is dorky, as ringmaster orbit shots that enter on the left bounce off it on their way out the right. Doy.
[quoted image]
I have a temporary "solution" in the meantime *blush*.
[quoted image]
Thanks,
-Jason
I have the same problem mine is missing and was replaced with a post rubber split and glued to the end of the ramp which made the ball go sideways!
I have been looking and the only way I can get one is to buy a monster bash right ramp and take it off, but then I thought hold it a minute a remake has just come out!
Can anyone check to see if these are available on the pic it is ‘H’ from Chicago Gaming co.
I’m in the uk so much harder to get anything☹️
A36705C7-01B4-422E-AEC2-4D333B36E7C9 (resized).png
9A07B4A6-ED3B-495B-BED3-4C3E9AC7A453 (resized).pngQuoted from Pinoffski:Part No:01-14844
Available from
https://www.marcospecialties.com/pinball-parts/01-14844
http://www.actionpinball.com/parts.php?item=01-14844
https://shop.mrpinball.com.au/product/ball-guide-guard/
Blue rubber bumper
http://www.actionpinball.com/parts.php?item=626-5057-00
https://www.pinball.co.uk/spares-accessories/blue-rubber-23-6766/
https://www.pinballlife.com/williams-blue-rubber-bumper-23-6766.html
Sweet so we can get one without messing about.
Thanks for that, I had a spare new square blue pad that I just stuck on earlier. Should last a while until I get the guard.
Fitted a ringmaster plastic protector today, just fits around the ringmaster and not the whole ringmaster plastic. About an inch wide, enough to stop the edge getting cracked.
Custom made in uk.
https://www.colspinballmods.com/
91CF84AF-11ED-48B3-B97F-41F5D8805DE2 (resized).jpegQuoted from amxfc3s:Has anyone installed GIOCD and LEDOCD on a CV? Id like to install LEDs in mine but was getting some noticeable pulsing with both non -ghosting and regular comet LEDs. Not flickering completely off and on, but still annoying. It was happening in both the GI and controlled lamps.
I have a version of ocd (Afterglow) which is great, looks much better and when you hit the ringmaster the lights operate correctly- it will only light the current lamp then the previous light up with it, before it lit all previous lamps as well. Sure this is right unless I was drinking too much!
Quoted from whthrs166:Interesting picture. Be very careful when reinstalling the RM head. It is possible to cause the RM flasher assembly to short to the post. This will blow the flasher fuse if your using the WPC-95 power driver board. If you are using the Rotten Dog power driver board, it will blow chip U20. RD did not fuse that circuit and it instead blows the chip. This happened to my game before I bought it so I inherited the problem. The previous owner had the RD board in it. I was lucky though. I got the original board also and returned it to the game once the issue was repaired.
WOW just WOW!
Quoted from atrainn:I picked up a CV a couple weeks ago and absolutely love it. I noticed there's a pinsound board for it, does anyone have one and is open to providing feedback? I can't seem to find a video or anything to hear if there's much of a difference.
I have pinsound in mine and the original sound file sounds very good, can’t fault it.
Don’t know where it came from as it was in there already along with The greatest Showman mix, which isn’t too bad.
Quoted from atrainn:Is it still possible to get a pinbits ringmaster protector? It's out of stock on their site and they've replied to none of my emails. $70 for the other protectors out there seems kind of insane to me.
I read people had issues with the metal protector catching I think, I went with the Revolutionary pinball version and don’t regret it. Very easy to fit and I didn’t need adjustment anywhere. Straight on.
Quoted from bobukcat:I would advise you just skip the RM protectors all together, don't think they are necessary and they mess up gameplay.
Yes it does make the shot harder as it can just bounce back from the spring when it would have probably gone down, but that was just a very easy shot. After fitting the protector it requires a bit more skill. Was too easy anyway.
You're currently viewing posts by Pinsider Lostcause.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/welcome-to-the-circus-cv-club-for-owners-fans?tu=Lostcause and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Van Alstyne, TX